Studies on the effect of blending method, the introduction method of initiator (dicumyl peroxide, DCP), and the blending time with antioxidant (Irganox) added on the mechanical properties of PP—Aspen composites with and without DCP, respectively are undertaken. An optimum blending time for the composite with Irganox is obtained. The optimum content of Irganox as well as pre-mixing and the final-step feeding-method of DCP are compared to that of conventional method of blending in order to achieve the optimum values of impact and tensile strength properties.
Bledzki, A.K. , Reihmane, S. and Gassan, J.J. (1998). Thermoplastics Reinforced with Wood Fibers: A Literature Review, Polymer-Plastics Technology Engineering, 37(4): 451—468.
2.
Dalaväg, H., Klason, C. and Strömvall, H.E. (1985). The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part II. Filling with Processing Aids and Coupling Agent, International Journal of Polymeric Matereials, 11(1): 9—38.
3.
Park, B.D. and Balatinecz, J.J. (1996). Effects of Impact Modification on the Mechanical Properties of Wood-fiber Thermoplastic Composites with High Impact Polypropylene (HIPP), Journal of Thermoplastic Composite Materials, 9(4): 342—364.
4.
Nogellova, Z. , Kokta, B.V. and Chodak, I. (1998). A Composite LDPE/Wood Flour Crosslinked by Peroxide, Journal of Macromolecular Science-Part A: Pure and AppliedChemistry, A35 (7—8): 1069—1077.
5.
Zadorecki, P. and Michell, A.J. (1989). Future Prospects for Wood Cellulose as Reinforcement in Organic Polymer Composites, Polymer Composites, 10(2): 69—77.
6.
Winfield, P.H. , Harris, A.F. and Hutchinson , A.R. (2001). The Use of Flame Ionisation Technology to Improve the Wettability and Adhesion Properties of Wood, International Journal of Adhesion and Adhesives, 21(2): 107—114.
7.
Belgacem, M.N. , Bataille, P. and Sapieha, S. (1994). Effect of Corona Modification on the Mechanical Properties of Polypropylene/Cellulose Composites, Journal of Applied Polymer Science, 53(4): 379—465.
8.
Qiu, W., Zhang. F., Endo, T. and Hirotsu, T. (2003). Preparation and Characteristics of Composites of High-crystalline Cellulose with Polypropylene: Effects of Maleated Polypropylene and Cellulose Content, Journal of Applied Polymer Science , 87(2): 337—345.
9.
Gauthier, R. , Joly, C., Coupas, A.C., Gauthier, H. and Escoubes, M. (1998). Interfaces in Polyolefin/Cellulosic Fiber Composites: Chemical Coupling, Morphology, Correlation with Adhesion and Aging in Moisture, Polymer Composites, 19(3): 287—300.
10.
Lai, S.M. , Yeh, F.C., Wang, Y., Chan, H.C. and Shen, H.F. (2003). Comparative Study of Maleated Polyolefins as Compatibilizers for Polyethylene/Wood Flour Composites , Journal of Applied Polymer Science, 87(3): 487—496.
11.
Maldas, D. and Kokta, B.V. (1994). Role of Coupling Agents on the Performance of Wood Flour-filled Polypropylene Composites, International Journal of Polymer Materials, 27(1—2): 77—88.
12.
Felix, J. and Gatenholm, P. (1991). The Nature of Adhesion in Composites of ModifiedCellulose Fibers and Polypropylene, Journal of Applied Polymer Science , 42(3): 609—620.
13.
Kazayawoko, M., Balatinecz, J.J. and Matuana, L.M. (1999). Surface Modification and Adhesion Mechanisms in Wood Fiber—polypropylene Composites, Journal of Materials Science, 34(24): 6189—6199.
14.
Oksman, K. and Clemons, C. (1998). Mechanical Properties and Morphology of Impact Modified Polypropylene—Wood Flour Composites, Journal of Applied Polymer Science, 67(9): 1503—1513.
15.
Joseph, K., Thomas, S. and Pavithran, C. (1996). Effects of Chemical Treatment on the Tensile Properties of Short Sisal Fibre-reinforced Polyethylene Composites, Polymer, 37(23): 5139—5149.
16.
George, J., Janardhan, R., Anand, J.S., Bhagawan, S.S. and Thomas, S. (1996). Melt Rheological Behaviour of Short Pineapple Fibre Reinforced Low Density Polyethylene Composites, Polymer , 37(24): 5421—5431.
17.
Huang, H., Lu, H.H. and Liu, N.C. (2000). Influence of Grafting Formulations and Extrusion Conditions on Properties of Silane-grafted Polypropylene, Journal of Applied Polymer Science, 78: 1233—1238.
18.
Azizi, H. and Ghasemi, I. (2004). Reactive Extrusion of Polypropylene: Production of Controlled-rheology Polypropylene (CRPP) by Peroxide-promoted Degradation , Polymer Testing, 23(2): 137—143.
19.
Sen, A.K. , Mukherjee, B.A., Bhattacharyya , S.P., De , P. and Bhowmick, A.K. (1991). Functionalization of Polyethylene and Ethylene Propylene Diene Terpolymer in the Bulk through Dibutyl Maleate Grafting, Angewandte Makromolekulare Chemie, 191(1): 15—30.
20.
Ibhadon, A.O. (1998). Fracture Mechanics of Polypropylene: Effect of Molecular Characteristics, Crystallization Condition and Annealing on Morphology and Impact Performance, Journal of Applied Polymer Science, 69(13): 2657—2661.
21.
Pesetskiia, S.S. , Jurkowskib, B., Krivoguza, Y.M. and Kelarb, K. (2001). Free-radical Grafting of Itaconic Acid onto LDPE by Reactive ExtrusionI. Effect of Initiator Solubility, Polymer, 42: 469—475.
22.
Zakoshansky, V.M. (1992). Method for the Decomposition of Cumene Hydroperoxide by Acidic Catalyst to Phenol and Acetone, United States Patent 5254751.
23.
Yamazaki, T. and Seguchi, T. (2000). ESR Study on Chemical Crosslinking Reaction Mechanisms of Polyethylene Using a Chemical Agent. IV. Effect of Sulfur- and Phosphorous-Type Antioxidants, Journal of Polymer Science Par A: Polymer Chemistry , 38: 3092—3099.
24.
Liu, N.C. , Yao, G.P. and Huang, H. (2000). Influences of Grafting Formulations and Processing Conditions on Properties of Silane Grafted Moisture Crosslinked Polypropylenes, Polymer41(12): 4537—4542.
25.
Karimi, A., Nazari, S., Ghasemi, I., Tajvidi, M. and Ebrahimi, G. (2006). Effect of Delignification of Wood Fibers on the Mechanical Properties of Wood Fiber-polypropylene Composites, Journal of Applied Polymer Science, 102: 4759—4763.
