Study on the effect of concentration of maleated polypropylene (MAPP), dicumyl peroxide (DCP), nanoclay (NC), and aspen fiber loading on the mechanical properties of Aspen—PP composites has been undertaken with the objective to protect or increase the impact strength without losing or weakening the tensile strength. The central composite design of Statgraphic plus is used to determine the optimum concentration of additives and to maximize both the impact as well as tensile strength properties to be superior to that of pure PP. Finally, the material price of PP composites with an optimal composition of filler (aspen fiber and NC), coupling agent (MAPP), and initiator (DCP) is compared to that of pure PP and PP reinforced with glass fibers.
Salernitano, E. and Migliaresi, C. (2003). Composite Materials for Biomedical Application: A Review, Journal of Applied Biomaterials &Biomechanics, 1: 3—18.
2.
Bledzki, A.K. , Reihmane, S. and Gassan, J. (1998). Thermoplastics Reinforced with Wood fillers: A Literature Review, Polymer Plastics Technology and Engineering,37(4): 451—468.
3.
Dalaväg, H., Klason, C. and Strömvall, H.E. (1985). The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part II. Filling with Processing Aids and Coupling Agent, Int. J. Polym. Mater., 11(1): 9—38.
4.
Park, B.D. and Balatinecz, J.J. (1996). Effects of Impact Modification on the Mechanical Properties of Wood-fiber Thermoplastic Composites with High Impact Polypropylene (HIPP), J. Thermoplast. Compos. Mater. , 9(4): 342—364.
5.
Nogellova, Z. , Kokta, B.V. and Chodak, I. (1998). A Composite LDPE/Wood Flour Crosslinked by Peroxide, J. Macromol. Sci. Pure Appl. Chem., A35(7-8):1069—1077.
6.
Zadorecki, P. and Michell, A.J. (1989). Future Prospects for Wood Cellulose as Reinforcement in Organic Polymer Composites, Polym. Compos., 10(2): 69—77.
7.
Selke, S.E. and Wichman, I. (2004). Wood Fiber/Polyolefin Composites, Composites Part A: Applied Science and Manufacturing, 35: 321—326.
8.
Singh, S. and Mohanty, A.K. (2006). Wood Fiber Reinforced Bacterial Bioplastic Composites: Fabrication and Performance Evaluation, Composites Sciences and Technology, 67(9): 1753—1763.
9.
Winfield, P.H. , Harris, A.F. and Hutchinson , A.R. (2001). The Use of Flame Ionisation Technology to Improve the Wettability and Adhesion Properties of Wood, International Journal of Adhesion and Adhesives,21(2): 107—114.
10.
Belgacem, M.N. , Bataille, P. and Sapieha, S. (1994). Effect of Corona Modification on the Mechanical Properties of Polypropylene/Cellulose Composites, Journal of AppliedPolymer Science, 53(4): 379—465.
11.
Qiu, W. , Zhang, F., Endo , T. and Hirotsu, T. (2003). Preparation and Characteristics of Composites of High-crystalline Cellulose with Polypropylene: Effects of Maleated Polypropylene and Cellulose Content, Journal of AppliedPolymer Science, 87(2): 337—345.
12.
Gauthier, R. , Joly, C.A., Coupas , C., Gauthier, H. and Escoubes, M. (1998). Interfaces in Polyolefin/Cellulosic Fiber Composites: Chemical Coupling, Morphology, Correlation with Adhesion and Aging in Moisture, PolymerComposites, 19(3): 287—300.
13.
Lai, S.M. , Yeh, F.C., Wang , Y., Chan, H.C. and Shen, H.F. (2003). Comparative Study of Maleated Polyolefins as Compatibilizers for Polyethylene/Wood Flour Composites, Journal of AppliedPolymer Science, 87(3): 487—496.
14.
Maldas, D. and Kokta, B.V. (1994). Role of Coupling Agents on the Performance of Wood Flour-filled Polypropylene Composites, International Journal of Polymer Materials,27(1—2): 77—88.
15.
Felix, J.M. and Gatenholm, P. (1991). The Nature of Adhesion in Composites of Modified Cellulose Fibers and Polypropylene, Journal of AppliedPolymer Science, 42(3): 609—620.
16.
Kazayawoko, M. , Balatinecz, J.J. and Matuana, L.M. (1999). Surface Modification and Adhesion Mechanisms in Wood Fiber—Polypropylene Composites, Journal of MaterialsScience, 34(24): 6189—6199.
17.
Oksman, K. and Lindberg, H. (1998). Mechanical Properties and Morphology of Impact Modified Polypropylene—Wood Flour Composites, Journal of AppliedPolymer Science, 67(9): 1503—1513.
18.
Diez-Gutierrez, S., Rodriguez-Perez , M.A., De Saja, J.A. and Velasco, J.I. (1999). Dynamic Mechanical Analysis of Injection-moulded Discs of Polypropylene and Untreated and Silane-treated Talc-filled Polypropylene Composites, Polymer, 40: 5345—5353.
19.
Pang, Y.X., Jia, D.M., Hu, H.J., Hourston, D.J. and Song, M. (2000). Effects of a Compatibilizing Agent on the Morphology, Interface and Mechanical Behaviour of Polypropylene/Poly(ethylene terephthalate) Blends, Polymer, 41: 357—365.
20.
Keener, T.J. , Stuart, R.K. and Brown, T.K. (2004). Maleated Coupling Agents for Natural Fibre Composites , Composites: Part A, 35: 357—362.
21.
Stark, N.M. and Rowlands, R.E. (2003). Effects of Wood Fiber Characteristics on Mechanical Properties of Wood/Polypropylene Composites , Wood and Fiber Science, 35(2): 167—174.
22.
Karmaker, A.C. and Youngquist, J.A. (1996). Injection Molding of Polypropylene Reinforced with Short Jute Fibers, Journal of AppliedPolymer Science, 62: 1147—1151.
23.
Bengtsson, M. and Oksman, K. (2006). Siliane Crosslinked Wood Plastic Composites: Processing and Properties, CompositesScience and Technology, 66: 2177—2186.
24.
Kokta, B.V. , Raj, R.G. and Daneault, C. (1989). Use of Wood Flour as Filler in Polypropylene: Studies on Mechanical Properties , Polym.-Plast. Technol. Eng., 28(3): 247—259.
25.
Raj, R.G. , Kokta, B.V., Maldas , D. and Daneault, C. (1989). Use of Wood Fibers in Thermoplastics. VII. The Effect of Coupling Agents in Polyethylene—Wood Fiber Composites, Journal of AppliedPolymer Science, 7(4): 1089—1103.
26.
Kuan, H.C., Huang, J.M., Ma, C.C.M. and Wang, F.Y. (2003). Processability, Morphology and Mechanical Properties of Wood Reinforced High Density Polyethylene Composites, Plast. Rubber Compos., 2(3): 122—126.
27.
Smith, T.L. , Masilamani, D., Bui , L.K., Brambilla, R., Khanna, Y.P. and Gabriel, K.A. (1994). Acetals as Nucleating Agents for Polypropylene, Journal of AppliedPolymer Science , 52: 591—596.
28.
Iroh, J.O. and Berry, J.P. (1996). Mechanical Properties of Nucleated Polypropylene and Short Glass Fiber-Polypropylene Composites, European Polymer Journal, 32(12): 1425—1429.
29.
Joseph, K., Thomas, S. and Pavithran, C. (1996). Effects of Chemical Treatment on the Tensile Properties of Short Sisal Fibre-reinforced Polyethylene Composites, Polymer, 37(23): 5139—5149.
30.
George, J., Janardhan, R., Anand, J.S., Bhagawan, S.S. and Thomas, S. (1996). Melt Rheological Behaviour of Short Pineapple Fibre Reinforced Low Density Polyethylene Composites, Polymer , 37(24): 5421—5431.
31.
Chen, L., Wong, S.-C. and Pisharath, S. (2003). Fracture Properties of Nanoclay-Filled Polypropylene, Journal of AppliedPolymer Science, 88: 3298—3305.
32.
Sain, M.M. and Kokta, B.V. (1993). Effect of Solid-State Modified Polypropylene on the Physical Performance of Sawdust-Filled Polypropylene Composites, Advances in Polymer Technology,12(2): 167—183.
33.
Kokta, B.V. (2003). Mechanical Properties of Polypropylene Composites Reinforced with Switch-grass, XXII Reinforced Plastic Conference, Karlovy Vary, Czech Republic, on May 20—22: 8.
34.
Kokta, B.V. (2003). Polypropylene Composites Reinforced with Cellulosic Fibers, ModPol2003, Stara Lesna, Slovakia, on October 5—8: 22.
35.
Karimi, A., Nazari, S., Ghasemi, I., Tajvidi, M. and Ebrahimi, G. (2006). Effect of Delignification of Wood Fibers on the Mechanical Properties of Wood Fiber-Polypropylene Composites, Journal of AppliedPolymer Science, 102: 4759—4763.
36.
Fung, K.L., Li, R.K.Y. and Tjong, S.C. (2002). Interface Modification on the Properties of Sisal Fiber-Reinforced Polypropylene Composites, Journal of AppliedPolymer Science, 85: 169—176.
37.
Chuai, C., Almdal, K., Poulsen, L. and Plackett, D. (2001). Conifer Fibers as Reinforcing Materials for Polypropylene Based Composites, Journal of AppliedPolymer Science, 80: 2833—2841.
38.
Ibhadon, A.O. (1998). Fracture Mechanics of Polypropylene: Effect of Molecular Characteristics, Crystallization Condition and Annealing on Morphology and Impact Performance, Journal of AppliedPolymer Science, 69(13): 2657—2661.
39.
Huang, H., Lu, H.H. and Liu, N.C. (2000). Influence of Grafting Formulations and Extrusion Conditions on Properties of Silane-grafted Polypropylene, Journal of AppliedPolymer Science, 78: 1233—1238.
40.
Azizi, H. and Ghasemi, I. (2004). Reactive Extrusion of Polypropylene: Production of Controlled-Rheology Polypropylene (CRPP) by Peroxide-promoted Degradation , Polymer Testing,23(2): 137—143.
41.
Sanadi, A.R. , Caufield, D.F., Jacobson , R.E. and Rowell, R.M. (1995). Renewable Agricultural Fibres as Reinforcing Fillers in Plastics: Mechanical Properties of Kenaf Fibre-polypropylene Composites, Ind. Eng. Chem. Res., 34: 1889—1896.
42.
Rana, A.K., Mandal, A., Mitra, B.C. Jacobson, R. Rowell, R. and Banerjee, A.N. (1998). Short Jute Fiber-reinforced Polypropylene Composites: Effect of Compatibilizer, Journal of AppliedPolymer Science, 69: 329—338.
43.
Arbelaiz, A. , Fernández, B., Ramos , J.A., Retegi, A.Liano-Ponte, R. and Mondragon, I. (2005). Mechanical Properties of Short Flax Fibre Bundle/Polypropylene Composites: Influence of Matrix/Fibre Modification, Fibre Content, Water Uptake and Recycling , Composites Science and Technology, 65(10): 1582—1592.
44.
Karmarkar, A., Chauhan, S.S., Modak , J. and Chanda, M. (2007). Mechanical Properties of Wood-Fiber Reinforced Polypropylene Composites: Effect of a Novel Compatibilizer with Isocyanate Functional Group, Composites Part A: Applied Science and Manufacturing, 38(2): 227—233.
45.
Felix, J.M. and Gatenholm, P. (1991). The Nature of Adhesion in Composites of Modified Cellulose Fibers and Polypropylene, Journal of AppliedPolymer Science, 42(3): 609—620.
46.
Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibres, Prog. Polymer Science , 24: 221—274.
47.
Raj, R.G. , Kokta, B.V. and Daneault, C. (1989). Effects of Chemical Treatment of Fibers on the Mechanical Properties of Polyethylene-Wood Fiber Composites , J. Adhesion Sci. Technol., 3(1): 55—64.
48.
Lee, S.-Y. and Yang, H.-S., Kim , H.-J.Jeong, C.-S.Lim , B.S. and Lee , J.-N. (2004). Creep Behavior and Manufacturing Parameters of Wood Flour Filled Polypropylene Composites, Composite Structures,65(3—4): 459—469.
49.
Yuan, X., Zhang, Y. and Zhang, X. (1999). Maleated Polypropylene as a Coupling Agent for Polypropylene-Waste Newspaper Flour Composites, Journal of AppliedPolymer Science, 71: 333—337.
50.
Park, J.-M. , Quang, S.-T., Hwang, B.-S. and DeVries, K.L. (2006). Interfacial Evaluation of Modified Jute and Hemp Fibers/Polypropylene (PP)-Maleic Anhydride Polypropylene Copolymers (PP-MAPP) Composites using Micromechanical Technique and Nondestructive Acoustic Emission, CompositesScience and Technology, 66: 2686—2699.
51.
Raj, R.G. , Kokta, B.V. and Daneault, C. (1989). Effect of Fiber Treatment on Mechanical Properties of Polypropylene-Wood Fiber Composites, Makromol. Chem. Macromol. Symp,28: 187—202.
52.
Maldas, D. and Kokta, B.V. (1990). Effect of Coating Treatments on the Mechanical Behavior of Wood-fiber-filled Polystyrene Composites. I. Use of Polyethylene and Isocyanate as Coating Components, Journal of Applied Polymer Science, 40: 917—928.
53.
Kokta, B.V., Maldas, D., Daneault, C. and Béland, P. (1990). Composites of Polyvinyl chloride-wood fiber. I. Effect of Isocyanate as a Bonding Agent, Polymer-plastics Techn. Eng., 29(182): 87—118.
54.
Maldas, D., Kokta, B.V. and Daneault, C. (1989). Thermoplastic Composites of Polystyrene: Effect of Different Wood Species on Mechanical Properties, Journal of AppliedPolymer Science, 38: 413—439.
