The article throws light on the physical methods to modify natural fibers to be used in composites. Physical methods in natural fiber processing are used to separate natural fiber bundles into individual filaments and to modify the surface structure of the fibers so as to improve the use of natural fibers in composites. Steam explosion and thermomechanical processes fall in the first category while plasma, dielectric barrier techniques and corona fall in the second. The physical treatments have also been used to modify the thermoplastic polymeric films like polyethylene and polypropylene in a bid to impart reactivity. Reviewing such developments, the areas for further research are suggested.
Dhakal, H.N. , Zhang, Z.Y. and Richardson , M. (2007). Effect of Water Absorption on the Mechanical Properties of Hemp Fiber-Reinforced Unsaturated Polyester Composites, Composites Science and Technology, 67: 1674-1683.
2.
Gassan, J. and Bledzki, A.K. (1997). Effect of Moisture Content on the Properties of Silanized Jute-Epoxy Composites, Polymer Composites, 18(2): 179-184.
3.
Karmakar, A.C. (1997). Effect of Water Absorption on Dimensional Stability and Impact Energy of Jute Fiber-reinforced Polypropylene , Journal of Materials Science Letters, 16: 462-464.
4.
Sharma, H.S.S. and Van Sumere, C.F. (eds) (1992a). The Biology and Processing of Flax, M. Publications. Belfast, Northern Ireland.
5.
Sharma, H.S.S. and Van Sumere, C.F. (1992). Enzyme Treatment of Flax, Genetic Eng. Biotechnol., 12: 19-23.
6.
Brown, A.E. (1984). Epicoccum Nigrum, a Primary Saprophyte Involved in the Retting of Flax, Trans. Br. Mycol. Soc., 83: 29-35.
7.
Kessler, R.W. , Becker, U., Kohler , R. and Goth, B. (1998). Steam Explosion of Flax - a Superior Technique for Upgrading Fiber Value, Biomass and Bioenergy, 14(3): 237-249.
8.
Eichhorn, S.J. , Sirichaisit, J. and Young, R.J. (2001). Deformation Mechanisms in Cellulose Fibers, Paper and Wood, Journal of Materials Science, 36: 3129-3135.
9.
Das, S., Saha, A.K., Choudhury, P.K., Basak, R.K., Mitra, B.C., Todd, T., Lang, S. and Rowell, R.M. (2000). Effect of Steam Fiber Treatment on Jute Fiber , J. Appl. Polym. Sci., 76: 1652-1661.
10.
Da Cunha, C. , Deffieux, A. and Fontanille, M. (1993). Mechanical Properties of Thermally Treated Hemp Fibers, J. App. Polym. Sci., 48: 819.
11.
Brett, C. and Waldron, K. (1996). Physiology and Biochemistry of Plant Cell Walls , Chapman & Hall, London.
12.
Felix, J.M. and Gatenholm, P. (1991). The Nature of Adhesion in Composites of Modified Cellulose Fibers and Polypropylene, J. Appl. Polym. Sci., 42: 609-620.
13.
Avella, M., Casele, L., Dell'era, R., Focher, B., Martuscelli, E. and Marzetti, A. (1998). Effect of Moisture on Steam Exploded Fibers, J. Appl. Polym. Sci68: 1077-1089.
14.
Strom, G. and Carlsson, G. (1992). Wettability of Kraft Pulps - Effect of Surface Composition and Oxygen Plasma Treatment, J. Adhesion Sci. Technol., 6: 745-761.
15.
Lee, B.J. , McDonald, A.G. and James, B. (2001). Mechanical Properties of Thermally Treated Hemp Fibers, Mat. Res. Innovat., 4: 97-103.
16.
Liston, E.M. (1994). Plasma Surface Modification of Polymers: Relevance to Adhesion, Chapter 1, VSP Publishing, Utrecht.
17.
d'Agostino, R. (ed.) (1990 ). Plasma Deposition, Treatment, and Etching of Polymers, Academic Press, San Diego, CA.
18.
Xiao, G.Z. (1997). Effects of Solvents on the Surface Properties of Oxygen Plasma Treated Polypropylene Films, J. Adhes. Sci. Technol., 11(5): 655-663.
19.
Bichler, C., Langowski, H.-.C., Moosheimer, U. and Seifert, B. (1997). Adhesion Mechanisms on Aluminium, Aluminium Oxide and Silicon Oxide on Biaxially Oriented Polypropylene (BOPP), Poly Ethylene Terephthalate (PET), and Poly Vinyl Chloride (PVC). J. Adhes. Sci. Technol., 11: 112-134.
20.
Nihlstrand, H.T. , Schreiber, H.P. and Klemberg-Sapieha , J.E. ( 1996). Plasma Treatment and Adhesion Properties of a Rubber Modified Polypropylene , J. Adhes. Sci. Technol., 10: 651-675.
21.
Vallon, S., Brenot, R., Hofrichter, A., Drevillon, B., Gheorghiu, A., Senemaud, A., Klemberg-Sapieha, J.E., Martinu, L. and Poncin-Epaillard, F. (1996). Adhesion Mechanisms of Silica Layers on Plasma Treated Polymers. Part II, Polypropylene, J. Adhes. Sci. Technol., 10(12): 1313-1332.
22.
Sutherland, I. , Popat, R.P., Brewis , D.M. and Calder, R. (1994). Corona Discharge Treatment of Polyolefins, J. Adhes., 46: 79-82.
23.
Nowak, S., Haerri, H.P., Schlapbach, L. and Vogt, J. (1990). Surface Analysis and Adhesion of Polypropylene after Low Pressure Plasma Treatment, Surf. Interface Anal. , 16: 1-12.
Marais, S., Gouanve, F., Bonnesoeur, A., Grenet, J., Poncin-Epaillard, F., Morvanc, C. and Metayer, M. (2005). Unsaturated Polyester Composites Reinforced with Flax Fibers: Effect of Cold Plasma and Autoclave Treatments on Mechanical and Permeation Properties, Composites: Part A, 36: 975-986.
27.
Wang, C.X. and Qin, P. (2007). Two Sided Modification of Wool Fabrics by Atmospheric Pressure Plasma Jet: Influence of Processing Parameters on Plasma Penetration , Surface and Coatings Technology, 201(14): 6273-6277.
28.
Xiao, G.Z. (1997). Modification of Wood Wettability by Plasma and Corona Treatments, J. Adhes. Sci. Technol., 11(5): 655-663.
29.
Farley, J.M. and Meka, P. (1994). Investigation on the Oxidation of Surface Layers of Polyolefins Treated with Corona Discharge , J. Appl. Polym. Sci., 51: 121-124.
30.
Novak, I. and Florian, S. (1995). Influence of Processing Additives on Adhesive Properties of Surface-Modified Low-Density Polyethylene, J. Mater. Sci. Lett., 14: 1021-1026.
31.
Onyiriuka, E.C. (1993). The Effects of High-energy Radiation on the Surface Chemistry of Polystyrene: A Mechanistic Study, J. Appl. Polym. Sci., 47: 2187-2194.
32.
Clark, D.T. and Dilks, A. (1979). Glow Discharge Modification of Polymers in Pure Oxygen and Helium-Oxygen Mixtures, J. Polym. Sci., Polym. Chem. Ed., 17: 957-976.
33.
Qiu, Y. , Hwang, Y.J., Zhang , C., Bures, B.L. and Mccord, M. (2002). The Effect of Atmospheric Pressure Helium Plasma Treatment on the Surface and Mechanical Properties of Ultrahigh-modulus Polyethylene Fibers, J. Adhes. Sci. Technol. , 16: 449-457.
34.
Qiu, Y. , Hwang, Y.J., Zhang , C., Bures, B.L. and Mccord, M. (2002). Atmospheric Pressure Helium and Oxygen Plasma Treatment of Ultrahigh Modulus Polyethylene Fibers , J. Adhes. Sci. Technol., 16: 449-457.
35.
Schutze, A. , Jeong, J.Y., Babayan , S.E., Park, J., Selwyn, G.S. and Hicks, R.F. (1998). The Atmospheric-Pressure Plasma Jet: A Review and Comparison to Other Plasma Sources, IEEE Trans. Plasma Sci., 26: 1685-1694.
36.
Stefecka, M. and Rahel, J. (1999). Two Sided Modification of Wool Fabrics by Atmospheric Pressure Plasma Jet: Influence of Processing Parameters on Plasma Penetration, J. Mater. Sci. Lett., 18: 6273-6277.
37.
Uehara, T. (1999). Corona Discharge Treatment of Polymers, In: Mittal, K.L. and Pizzi, A. (eds), Adhesion Promotion Techniques, pp. 139-174, Marcel Dekker, New York.
Dong, S., Sapieha, S. and Schreiber, H.P. (1992). Effect of Corona Discharge on Cellulose Polyethylene Composites, Polym. Eng. Sci., 32(22): 1737-1741.
40.
Bataille, P. , Dufourd, M. and Sapieha, S. (1994). Copolymerization of Styrene on to Cellulose Activated by Corona, Polymer International , 24(4): 387-391.
41.
Gassan, J., Voytek, S., Gutowski, and Bledzki, A. (2000). About the Surface Characteristics of Natural Fibers, Macromol. Mater. Eng., 283: 132-139.
42.
Gassan, J. and Gutowski, S. (2000). Effects of Corona Discharge and UV Treatment on the Properties of Jute-Fiber Epoxy Composites, Composites Science and Technology, 60(15): 2857-2863.
43.
Belgacem, M.N. , Bataille, P. and Sapieha, S. (1994). Effect of Corona Modification on Cellulose/PP Composites, J. Appl. Polym. Sci., 53: 379-385.
44.
Ulrich Kogelschatz (2003). Dielectric-barrier Discharges: Their History, Discharge Physics, and Industrial Applications, Plasma Chemistry and Plasma Processing, 23(1): 1-46.
45.
Roth, R. (2001). Applications to Non-thermal Plasma Processing , Industrial Plasma Engineering, 2: 122-125.
46.
Kogelschatz, U. (2003). Dielectric-barrier Discharges: Their History, Discharge Physics, and Industrial Applications, Plasma Chemistry and Plasma Processing, 23: 1-46.
47.
Naidis, G.V. (1997). Modeling of Plasma Chemical Processes in Pulsed Corona Discharges, Journal of Physics D Applied Physics, 30: 1214-1218.
48.
Vander Wielen, L.C. and Ragauskas , A.J. (2004). Grafting of Acryl Amide onto Cellulosic Fibers via Dielectric-Barrier Discharge , European Polymer Journal, 40: 477-482.
49.
Back, E.L. and Danielsson, S. (1987). Oxidative Activation of Wood and Paper Surfaces for Bonding and for Paint Adhesion, Nordic Pulp and Paper Research Journal, 6: 53-62.
50.
Brown, P.F. and Swanson, J.W. (1971). Wetting Properties of Cellulose Treated in a Corona Discharge, Tappi Journal , 54: 2012-2018.
51.
Börås, L. and Gatenholm, P. (1999). Surface Properties of Mechanical Pulps Prepared Under Various Sulfonation Conditions and Preheating Time, Holzforschung, 53: 429-434.
52.
Henriksson, Å. and Gatenholm, P. (2001). Controlled Assembly of Glucoronoxylans onto Cellulose Fibers, Holzforschung , 55: 494-502.
53.
Donohoe, K.G. and Wydeven, T. (1979). Plasma Polymerization of Ethylene, J. Appl. Polymer Sci., 23: 2591-2601.
54.
Salge, J. (1996). Plasma-assisted Deposition at Atmospheric Pressure , J. Surf. Coat. Technol., 80: 1-7.
55.
Miller, B., Penn, L.S. and Hedvat, S.M. (1983). Wetting Force Measurements on Single Fibers, Colloids and Surfaces, 6: 49-61.
Willems, P. (1962). Kinematic High-frequency and Ultrasonic Treatment of Pulp, Pulp & Paper Magaz. Canada, 63: T455-T462.
58.
Laine, J.E. and Goring, D.A.I. (1977). Influence of Ultrasonic Irradiation on the Properties of Cellulosic Fibers, Cell. Chem. Technol., 11(5): 561-567.
Gassan, J. and Gutowski, V.S. (2000). Effects of Corona Discharge and UV Treatment on the Properties of Jute-fibre Epoxy Composites, Composites Science and Technology, 60: 2857-2863.
61.
Oosterom, R. , Ahmed, T.J., Poulis , J.A. and Bersee, H.E.N. (2005). Adhesion Performance of UHMWPE after Different Surface Modification Techniques , Medical Engineering & Physics, 28(4): 323-330.
