Physico-mechanical Properties of Paper Sludge-Thermoplastic Polymer Composites

Abstract

This study investigates the effect of paper sludge’s mixing ratio and the types and concentrations of coupling agents on the physical and mechanical properties of paper sludge-thermoplastic polymer composites. In the experiment, four levels of mixing ratios of paper sludge to thermoplastic polymer (10: 90, 20: 80, 30: 70 and 40: 60) and three levels of coupling agent (Epolene G-3003^TM) content (1, 3, and 5 wt.%) were designed to discuss the physical and mechanical properties of composite. Composite density, as expected, increased but melt flow index decreased when the paper sludge content increased. Thickness swelling and water absorption of composites was slightly improved by the addition of paper sludge compared with control specimens. Tensile properties of composites significantly increased as the mixing ratio of paper sludge increased. Especially, tensile modulus improved with the increase of paper sludge content. Flexural strength and modulus showed similar trends to that of the tensile properties. Notched and unnotched Izod impact strengths lowered by the addition of paper sludge.

With the addition of coupling agent, G-3003^TM, tensile and flexural properties improved considerably compared with control specimens (without any coupling agent). Epolene G-3003^TM, with high molecular weight, was effective in the improvement of the composites’ tensile and flexural properties.

Keywords

paper sludge coupling agent thermoplastic polymer composite physical properties tensile properties flexural properties Izod impact strength

References

1. Campbell, A.G. , Engebretson, R.R. and Tripepi, R.R. (1991). Composting a Combined RMP/CMP Pulp and Paper Sludge , TAPPI Journal, 74(9): 183-191 .

2. Clemons, C. (1995). Exploratory Microscopic Investigation of Impacted Paper Fiber-reinforced Polypropylene Composites . In: Proceedings of Wood Fiber-plastic Composites - Virgin and Recycled Wood Fiber and Polymers for Composites, Forest Products Society, Madison, Wis, pp. 173-179 .

3. Hull, D. (1981). An Introduction to Composite Materials, Cambridge University Press, England .

4. Jacobson, R.E. , Engineer, M.S. , Caulfield, D.F. , Rowell, R.M. and Sanadi, A.R. (1995). Recent Developments in Annual Growth Lignocellulosics as Reinforcing Fillers in Thermoplastics , In: Proceedings of 2nd Biomass Conference of the Americas: Energy, Environment, Agriculture, and Industry, August 21-24, pp. 1171-1180 , National Renewable Energy Laboratory Portland, OR, Golden, CO.

5. Mallick, P.K. (1988). Fiber-reinforced Composites-Materials, Manufacturing, and Design-, pp. 73-176, Marcel Dekker, Inc., New York .

6. Mckenzie, A.W. and Yuritta, J.P. (1979). Wood Fiber Reinforced Polymers , Appita, 32(6): 460-465 .

7. Myers, G.E. , Chahyadi, I.S. , Coberly, C.A. and Ermer, D.S. (1991). Wood Flour/Polypropylene Composites: Influence of Maleated Polypropylene and Process and Composition Variables on Mechanical Properties , Intern. J. Polymeric Mater, 15: 21-44 .

8. Nielsen, L.E. (1974). Mechanical Properties of Polymers and Composites, pp. 308-323, Marcel Dekker, Inc., New York .

9. Park, B.D. and Balatinecz, J.J. (1996). Effects of Impact Modification on the Mechanical Properties of Wood-fiber Thermoplastic Composites with High Impact Polypropylene (HIPP) , Journal of Thermoplastic Composite Materials, 9: 342-364 .

10.

10. Rowell, R.M. , Tillman, A.M. and Liu, Z. (1986). Dimensional Stabilization of Flakeboard by Chemical Modification , Wood Science and Technology, 20: 83-95 .

11.

11. Sanadi, A.R. , Rowell, R.M. and Young, R.A. (1993). Interphase Modification in Lignocellulosic Fiber-thermoplastic Composites , Engineering for Sustainable Development, AICHE Summer National Meeting, paper 24f.

12.

12. Sanadi, A.R. , Caulfield, D.F. and Rowell, R.M. (1994). Reinforcing Polypropylene with Natural Fibers , Plastics Engineering, 4: 27-28 .

13.

13. Sanadi, A.R. , Young, R.A. , Clemons, C. and Rowell, R.M. (1994). Recycled Newspaper Fibers as Reinforcing Fillers in Thermoplastics: Part I - Analysis of Tensile and Impact Properties in Polypropylene , J. of Reinforced Plastics and Composites, 13: 54-66 .

14.

14. Simonsen, J. (1995). The Mechanical Properties of Woodfiber-plastic Composites: Theoretical vs. Experimental , In: Proceedings of Wood Fiber-Plastic Composites-Virgin and Recycled Wood Fiber and Polymers for Composites, Forest Products Society, Madison, Wis, pp. 47-55 .

15.

15. Son, J. , Kim, H.J. and Lee, P.W. (2001). Role of Paper Sludge Particle Size and Extrusion Temperature on Performance of Paper Sludge-Thermoplastic Polymer Composites , J. of Applied Polymer Science, 82(11): 2709-2718 .

16.

16. Woo, M. and Piggott, M.R. (1988). Water Absorption of Resins and Composites. IV. Water Transportation in Fiber Reinforced Plastics , J. Comp. Technol. Res., 10(1): 20-24 .

17.

17. Woodhams, R.T. , Law, S. and Balatinecz, J. J. (1990). Properties and Possible Applications of Wood Fiber-polypropylene Composites , In: Proceedings of Wood Adhesives Symposium, pp. 177-182 .