Tensile,flexural and morphological properties of electron beam-crosslinked LDPE

Abstract

The effect of electron beam (EB) irradiation on the tensile, flexural and morphological properties of low-density polyethylene (LDPE)/ethylene-propylene diene elastomer (EPDM) blends had been studied in the absence and presence of crosslink promoters, such as trimethylolpropane triacrylate (TMPTA) and triallyl cyanurate (TAC). Blends were prepared by melt mixing of LDPE and EPDM followed by EB irradiation at various doses. The gel fraction (%) of irradiated blends was increased with an increase in EPDM content as well as EB irradiation dose and consequently the tensile and flexural properties of the blends increased. The incorporation of crosslinking promoters accelerated the gel formation and improved the properties upon irradiation more efficiently. The phase morphology of fractured surface displayed immiscibility with a rough appearance before irradiation. But after irradiation, the surface became fine, smooth and uniform, which went on increasing upon irradiation, supporting the steady increase in mechanical properties. Surface appeared even smoother in the presence of TMPTA and TAC.

Keywords

Polymer blends and alloys EB crosslinking Tensile properties Flexural properties

Get full access to this article

View all access options for this article.

References

Sen-Majumder

and Bhowmick

A. K.

: ‘Structure-property relationship of electron-beam-modified EPDM rubber’, J. Appl. Polym. Sci. , 2000, 77, 323–337. doi: 10.1002/(SICI)1097-4628(20000711)77:2<323::AID-APP8>3.0.CO;2-V

Miguez Suarez

J. C.

, Costa Monteiro

E. E.

and Mano

E. B.

: ‘Study of the effect of gamma irradiation on polyolefins—low-density polyethylene’, Polym. Degrad. Stabil. , 2002, 75, 143–151. doi: 10.1016/S0141-3910(01)00213-0

Zaharescu

, Chipară

and Postolache

: ‘Radiation processing of polyolefin blendsII. Mechanical properties of EPDM-PP blends’, Polym. Degrad. Stabil. , 1999, 66, 5–8. doi: 10.1016/S0141-3910(99)00045-2

Abdel-Aziz

M. M.

, Abdel-Bary

E. M.

, Abou Zaid

M. M.

and Miligy

A. A.

: ‘Effect of gamma radiation on EPDM/LDPE blends’, J. Elastom. Plast. , 1992, 24, 178–191. doi: 10.1177/009524439202400303

Ray Chowdhury

, Sabharwal

and Sarma

K. S. S.

: ‘Development of recyclable electron beam radiation crosslinked LDPE/'EVA-embedded nanoclay' nanocomposites’, J. Reinf. Plast. Comp. , 2012, 31, 1426–1434. doi: 10.1177/0731684412459247

Mark

H. F.

: ‘ Encyclopedia of polymer science and technology ’, 2004, New York, Wiley-Interscience.

Maziyar

, Azman

and Chantara

T. R.

: ‘Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications’, Polym. Degrad. Stabil. , 2012, 97, 1432–1437. doi: 10.1016/j.polymdegradstab.2012.05.010

Santra

R. N.

, Bhowmick

A. K.

, Nando

G. B.

and Samantaray

B. K.

: ‘In situ compatibilization of low-density polyethylene and polydimethylsiloxane rubber blends using ethylene–methyl acrylate copolymer as a chemical compatibilizer’, J. Appl. Polym. Sci. , 1993, 49, 1145–1158. doi: 10.1002/app.1993.070490703

Ray Chowdhury

and Das

C. K.

: ‘Shrinkability and microstructural properties of composites based on Low-Density Polyethylene (LDPE) and Polyurethane (PU) rubber’, J. Thermoplast. Compos. Mater. , 2000, 13, 400–416. doi: 10.1106/V6PP-X3D2-RGDK-FT7P

10.

Ray Chowdhury

, Khader

S. A.

and Sarma

K. S. S.

: Antec- International Society of Plastic Engineers. Mumbai, India, 2012, December 6–8.

11.

Morteza Ehsani

, Zeynali

, Mojtaba

and Abbas

A. H.

: ‘LDPE/EPDM. blends as electrical insulators with unique surface, electrical and mechanical properties’, Iran. Polym. J. , 2009, 18, 37–47.

12.

Senna

M. M.

, Youssef

H. A.

and Eyssa

H. M.

: ‘Effect of electron beam irradiation, EPDM and azodicarbonamide on the foam properties of LDPE sheet’, Polym. Plast. Technol. , 2007, 46, 1093–1101. doi: 10.1080/03602550701525271

13.

Vranjes

and Rek

: ‘Effect of EPDM on morphology, mechanical properties, crystallization behavior and viscoelastic properties of iPP+HDPE blends’, Macromol. Sym. , 2007, 258, 90–100. doi: 10.1002/masy.200751210

14.

Rizk

R. A. M.

, Abdul-Kader

A. M.

, Ali

Z. I.

and Ali

: ‘Effect of ion bombardment on the optical properties of LDPE/EPDM polymer blends’, Vacuum , 2009, 83, 805–808. doi: 10.1016/j.vacuum.2008.07.012

15.

Ali’

Z. I.

and Afify

T. A.

: Egypt. J. Radiat. Sci. Appl. , 2010, 23, (2), 363–377.

16.

Spenadel

: ‘Radiation crosslinking of polymer blends’, Radiat. Phys. Chem. , 1979, 14, 683–697. doi: 10.1016/0146-5724(79)90104-3

17.

Charlesby

and Pinner

S. H.

: ‘Analysis of the solubility behaviour of irradiated polyethylene and other polymers’, P. Roy. Soc. A Math. Phy. , 1959, 249, 367–386. doi: 10.1098/rspa.1959.0030

18.

Charlesby

: ‘Gel formation and molecular weight distribution in long-chain polymers’, P. Roy. Soc. A Math. Phy. , 1954, 222, 542–557. doi: 10.1098/rspa.1954.0094

19.

Dikland

H. G.

and Van Duin

: In ‘ Spectroscopy of Rubber and Rubbery Materials ’, (ed. Litvinov

V. M.

and De

P. P.

), 207–246, 2002, Shawbury, Rapra Tech Ltd.

20.

Pyun

H. C.

, Lee

Y. C.

, Kim

K. J.

and Yoon

B. M.

: ‘Effect of Trifunctional monomer and Antioxidants on the crosslinking reaction of Polyethylene’, J Korean Nucl. Soc. , 1982, 14, 70–77.

21.

Handlos

: ‘The radiation chemistry of polyethylene IX’, Radiat. Phys. Chem. , 1979, 14, 721–728. doi: 10.1016/0146-5724(79)90107-9

22.

Waldron

R. N.

, Mcrae

H. F.

and Madison

J. D.

: ‘The effects of various monomers on crosslinking efficiency’, Radiat. Phys. Chem. , 1985, l25, 843–848. doi: 10.1016/0146-5724(85)90165-7

23.

Wiedenmann

: ‘Thermal-oxidative stability of radiation-crosslinked polyethylene-compounds for wire and cable insulations’, Radiat. Phys. Chem. , 1977, 9, 701–709. doi: 10.1016/0146-5724(77)90183-2

24.

Basfar

A. A.

, Mosnáček

, Shukri

T. M.

, Bahattab

M. A.

, Noireaux

and Courdreuse

: ‘Mechanical and thermal properties of blends of low-density polyethylene and ethylene vinyl acetate crosslinked by both dicumyl peroxide and ionizing radiation for wire and cable applications’, J. Appl. Polym. Sci. , 2008, 107, 642–649. doi: 10.1002/app.27114

25.

Ohring

: ‘ Engineering and materials science ’, 1995, San Diego, CA, Academic Press.

26.

Sharma

B. K.

, Ray Chowdhury

, Mahanwar

P. A.

and Sarma

K. S. S.

: ‘Influence of electron beam treatment on the crystallization and thermal stability of LDPE/EPDM blends’, Am. J. Eng. Appl. Sci. , 2014, 7, (3), 338–352. doi: 10.3844/ajeassp.2014.338.352

27.

Sarkhel

and Choudhary

: ‘Dynamic mechanical and thermal properties of PE-EPDM based jute fiber composites’, J. Appl. Polym. Sci. , 2008, 108, 3442–3453. doi: 10.1002/app.28024

28.

Ratnam

C. T.

, Nasir

, Baharin

and Zaman

: ‘The effect of electron beam irradiation on the tensile and dynamic mechanical properties of epoxidized natural rubber’, Eur. Polym. J. , 2001, 37, 1667–1676. doi: 10.1016/S0014-3057(01)00011-8

29.

Cornes

P. L.

and Haward

R. N.

: ‘Ductile fracture of rigid poly(vinyl chloride)’, Polymer , 1974, 15, 149–156. doi: 10.1016/0032-3861(74)90193-1

30.

Senna

M. M. H.

, Abdel-Moneam

Y. K.

, Hussein

Y. A.

and Alarifi

: ‘Effects of electron beam irradiation on the structure-property behavior of blends based on low density polyethylene and styrene-ethylene-butylene-styrene-block copolymers’, J. Appl. Polym. Sci. , 2012, 125, 2384–2393. doi: 10.1002/app.36488

31.

Giri

, Naskar

and Nando

G. B.

: ‘Effect of electron beam irradiation on dynamic mechanical, thermal and morphological properties of LLDPE and PDMS rubber blends’, Radiat. Phys. Chem. , 2012, 81, 1930–1942. doi: 10.1016/j.radphyschem.2012.08.004

Tensile,flexural and morphological properties of electron beam-crosslinked LDPE–EPDM blends

Abstract

Keywords

Get full access to this article

References