We assess the effects of chemical processing, ethylene oxide sterilization, and threading on bone surface and mechanical properties of bovine undecalcified bone screws. In addition, we evaluate the possibility of manufacturing bone screws with predefined dimensions. Scanning electronic microscopic images show that chemical processing and ethylene oxide treatment causes collagen fiber amalgamation on the bone surface. Processed screws hold higher ultimate loads under bending and torsion than the in natura bone group, with no change in pull-out strength between groups. Threading significantly reduces deformation and bone strength under torsion. Metrological data demonstrate the possibility of manufacturing bone screws with standardized dimensions.
Böstman, O.M. , Vainionpää, S., Hirvensälö, E., Mäkelä, A., Vithonen, K., Rokkanen, P. and Törmalä, P. (1987). Behandling av Dislokerade Malleolara Frakturer med Bioderaderbart Osteosynthesmaterial (Treatment of Dislocated Malleolar Fractures with Biodegradable Osteosynthesis Material), Nord. Med., 102(11): 299-300.
2.
Törmälä, P., Vainionpää, S., Kilpikari, J. and Rokkanen, P. (1987). The Effect of Fiber Reinforcement and Gold Plating on the Flexural Strength of PGA/ PLA Copolymer Material In Vitro, Biomaterials, 8(1): 42-45.
3.
Haje, D.P. and Volpon, J.B. (2005). Bovine Bone Screws Development: Machining Method and Metrological Study with Profile Projector, Acta Ortop. Bras., 14(2): 87-91.
4.
Actis, A., Obwegeser, J. and Bertolotto, P. (2003). Effects of Enzymatic Treatments on the Biomechanical Properties of Screws Made of Bone, J. Biomater. Appl., 17(3): 207-219.
5.
Hofmann, C., Schädel-Höpfner, M., Berns, T., Sitter, H. and Gotzen, L. (2003). Einfluss von Prozessierung und Sterilisation auf die Festigkeit von Pins aus boviner Tibiakompakta (Influence of Processing and Sterilization on the Mechanical Properties of Pins made from Bovine Cortical Bone), Unfallchirurg, 106(6): 478-482.
6.
Kakiuchi, M. and Ono, K. (1998). Defatted, Gas-sterilized Cortical Bone Allograft for Posterior Lumbar Interbody Vertebral Fusion, Int. Orthop. , 22(2): 69-76.
7.
Triantafyllou, N., Sotiropoulos, E. and Triantafyllou , J.N. (1975). The Mechanical Properties of the Lyophylized and Irradiated Bone Grafts, Acta Orthop. Belg. (Suppl), 41: 35-44.
8.
Volpon, J.B. and Da Costa, R.M.P. (2000). Ensaio Mecânico e uso Clínico do Enxerto Homógeno Processado (Mechanical Tests and Clinical Trial of Processed Human Bone Graft), Rev. Bras. Ortop., 35(6): 219-224.
9.
Roe, S.C. , Pijanowski, G.J. and Johnson, A.L. (1988). Biomechanical Properties of Canine Bone Allografts: Effects of Preparation and Storage, Am. J. Vet. Res., 49(6): 873-877.
10.
Wagner, S.D., Manley, P.A., Radasch, R.M., Hoefle, W.D. and Haynes, J.S. (1994). Failure of Ethylene Oxide-sterilized Cortical Allografts in two Dogs, J. Am. Anim. Hosp. Assoc., 30: 181-189.
11.
International Organization for Standardization (ISO). ISO 5835 (1991). Implants for Surgery-Metal Bone Screws with Hexagonal Drive Connection, Spherical Under-surface of Head , Asymmetrical Thread - Dimensions.
12.
Conrad, E.U. , Ericksen, D.P., Tencer, A.F., Strong, D.M. and Mackenzie , A.P. (1993). The Effects of Freeze-drying and Rehydratation on Cancellous Bone, Clin. Orthop., 290: 279-284.
13.
Obwegeser, J.A. (1994). Bioconvertible Screws made of Allogenic Cortical Bone for Osteosynthesis following Sagittal Split Ramus Osteotomy without Postoperative Immobilization, J. Craniomaxillofac. Sur., 22(2): 63-75.
14.
Brandão, J. (1997). Módulo de Elasticidade de Ossos Corticais: Revisão e Otimização da Metodologia Para Ossos Longos (Modulus of Elasticity of Cortical Bone: Literature Review and Optimization of Methodology for Long Bones) Master Degree Thesis, Ribeirão Preto, Brazil.
15.
Voggenreiter, R., Ascheri, R., Blümel, G. and Schmit-Neuerburg , K.P. (1994). Effects of Preservation and Sterilization on Cortical Bone Grafts - A Scanning Electron Microscopic Study, Arch. Orthop. Trauma Surg., 113(5): 294-296.
16.
Doherty, M.J. , Mollan, R.A.B. and Wilson, D.J. (1993). Effect of Ethylene Oxide Sterilization on Human Demineralized Bone, Biomaterials , 14(13): 994-999.
17.
Actis, A., Obwegeser, J. and Rupérez, C. (2004). Influence of Different Sterilization Procedures and Partial Demineralization of Screws Made of Bone on their Mechanical Properties , J. Biomater. App., 18(1): 193-207.
18.
Uhthoff, H.K. (1973). Mechanical Factors Influencing the Holding Power of Screws in Compact Bone, J. Bone Joint Surg. Br., 55(3): 633-639.
19.
Belangero, W.D. and Mariolani , J.R.L. (1992). Influência da Geometria de Parafusos Corticais AO Quanto ao Arrancamento ``In Vitro'' (Influence of Geometry of AO Cortical Screws in In Vitro Pulling out Tests), Rev. Bras. Ortop., 27(3): 177-179.
20.
Berns, T., Hofmann, C. and Gotzen, L. (2001). Festigkeitsuntersuchungen an Pins aus humaner Femur-kortikalis, Unfallchirurg, 104(1): 64-68.
21.
Törmälä, P., Vasenius, J., Vainionpää, S., Laiho, J., Pohjonen, T. and Rokkanen, P. (1991). Ultra-high-strength Absorbable Self-reinforced Polyglycolide (SR-PGA) Composite Rods for Internal Fixation of Bone Fractures: In vitro and in vivo Study, J. Biomed. Mater. Res., 25(1): 1-22.
22.
Knauss, P. (1981). Materialkennwerte und Festigkeitsverhalten des spongiösen Knochengewebes am coxalen Human-Femur (Material Properties and Strength Behaviour of Spongy Bone Tissue at the Coxal Human Femur), Biomed . Tech., 26(12): 200-210.
23.
Swanson, S.A.V. (1971). Biomechanical Characteristics of Bone, In: Kenedi, R.M. (ed.), Advances in Biomedical Engineering, pp. 137-187, Academic Press, London, England.
24.
International Organization for Standardization (ISO). ISO 6475 (1989). Implants for Surgery - Metal Bone Screws with Asymmetrical Thread and Spherical Under-surface - Mechanical Requirements and Test Methods.
25.
Rano, A.J., Savoy-Moore, R.T. and Fallat, L.M. (2002). Strength Comparison of Allogenic Bone Screws, Bioabsorbable Screws, and Stainless Steel Screw Fixation, J. Foot Ankle Surg., 41(1): 6-15.
