Abstract
Several processes have been used to produce polylactide for bone replacement. The challenge remains, however, to produce these devices by a simpler and more economical process. In this study, a method of combining powder and liquid parts was introduced. Star-shaped polylactides with molecular weights ranging from 3 to 16 kg/mol were synthesized and blended with a linear polylactide (Mw = 188 kg/mol) using the technique of emulsion solvent evaporation. The blends in a form of spherical powder were characterized by scanning electron microscopy, gel permeation chromatography, and particle size analysis. The heat-curing polylactide was fabricated by mixing the powder with triethylene glycol dimethacrylate, molded, and then heated in a hot water bath to solidify. The effects of powder composition in terms of amount and molecular weight of the star-shaped polylactide on mechanical properties were investigated. The results showed an increase in flexural strength with increase in the amount of star-shaped polylactide. The powder comprised star-shaped polylactide having the molecular weight of 10,770 g/mol, not less than 80wt%, offered the fabricated heat-curing polylactide with high strength ranging from 95 to 100 MPa. This formulation was further incorporated with hydroxyapatite to improve biocompatibility and subjected to degradation at 37°C. Mechanical test and weight loss determination together with biological test were conducted at certain times during degradation of the materials. Both materials with and without hydroxyapatite showed mechanical stability upon degradation for at least 6 months, but the one with hydroxyapatite revealed significantly better bioactivity at the end of 1-year follow-up study, making it the most promising material for bone implants.
Get full access to this article
View all access options for this article.