Evaluation of the In Vitro Drug Release from Resorbable Biocompatible Coatings for Vascular Stents

Abstract

The objective of this work was to prepare a biocompatible and degradable polymer coating for vascular stents that would release a restenosis inhibitor for a sustained period of time. To do so, two film processing techniques were compared using poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLAGA) polymers as well as the effect of the polymer composition, film thickness and drug loading on the in vitrorelease of dexamethasone from a stent model. Stainless steel square plates (SSSP) were either dipor spraycoated with different polymer proportions of PLA of two different molecular weights (25,000 and 120,000) and PLAGA with a molecular weight of 48,000 with specific drug content and film thickness. The release study was carried out over four months by placing the coated SSSP in a phosphate buffer solution (PBS) pH 7.4. The surface topography of the coated stents was investigated throughout the study by atomic force microscopy (AFM) and differential scanning calorimetry (DSC). Analyses were performed on samples before and after the release study. Dip coating produced a much slower release profile than the spray-coated films. None of the dip-coated SSSP samples achieved a β 50% release in 100 days while most of the spray-coated films released 100% of their load in β 120 days. The polymer composition affected the release profile with the dip-coated film with blended homopolymer films releasing more drug than films composed entirely of one homopolymer; however, this difference was not seen with the spray coated films. Drug loading and film thickness did not show a difference in drug release with the spray-coated films. DSC and AFM results showed progression, with time, in the polymer film degradation and erosion. This study demonstrated that it is feasible to coat a stent model with a biocompatible material and that this coating can release a restenosis inhibitor over time. The release from the biocompatible matrix can be modified by using different processing techniques and the release can be engineered to a desired release profile by blending different molecular weight homopolymers in dip-coated films. On the other hand, spray coating with different molecular weight fractions of the same homopolymer did not produce significant release profiles.

Keywords

polymer blending polymer stent coating polylactic acid controlled drug release surface topography

Get full access to this article

View all access options for this article.

References

Lewis, D.L. (1990). Controlled Release of Bioactive Agents from Lactide/Glycolide Polymers, In: Chasin, R.S.L.M. (ed.), Biodegradable Polymers as Drug Delivery Systems, Marcel Dekker, New York , pp. 1–41.

Gopferich, A. (1997). Mechanisms of Polymer Degradation and Elimination, In: Domb, J.K.A.J. and Wiseman, D.M. (eds), Handbook of Biodegradable Polymers, Harwood Academic Publishers, Amsterdam , pp. 451–471.

Strecker, E.-P. , Gabelmann, H. , Bocs, I. , Lucas, C. , Xu, Z. Heberstroh, J , Freudenberg, N. , Stricker, H. , Langer, M. and Betz, E. (1998). Effect on Intimal Hyperplasia of Dexamethasone Released from Coated Metal Stents Compared with Non-coated Stents in Canine Femoral Arteries , Cardiovascular and Interventional Radiology, 21: 487–496 .

Lincoff, M. , Furst, J.G. , Ellis, S.G. , Tuch, R.J. and Topol, E.J. (1997). Sustained Local Delivery of Dexamethasone by a Novel Intravascular Eluting Stent to Prevent Restenosis in the Porcine Coronary Injury Model , Journal of the America College of Cardiology, 29: 808–816 .

Hermann, R. , Schmidmaier, G. , Markl, B. , Resh, A. , Mahnel, I. , Stemberger, A. and Alt, E. (1999). Antithrombogenic Coating of Stents Using a Biodegradable Drug Delivery Technology . Thrombosis and Haemostasis, 82: 51–57 .

Sigwart, U. , Prasad, S. , Pradke and Nadra, I. (2001). Stent Coatings . Journal of Invasive Cardiology, 13(2): 139–140 .

Golomb, G. , Fishbein, D.M.I. and Mishaly, D. (1995). Perivascular Polymeric Controlled-release Therapy, In: Wise, D.L. (ed.), Encyclopedic Handbook of Biomaterials and Bioengineering, Marcel Dekker, New York , pp. 1043–1055.

Nakayama, Y. (2001). Development of High-Performance Stent: Gelatinous Photogel-coated Stent that Permits Drug Delivery and Gene Transfer . Journal of Biomedical Materials and Research, 57: pp. 559–566 .

Bodmeier, R. , Oh, K.H. and Chen, H. (1989). The Effect of the Addition of Low Molecular Weight Poly(DL-lactide) on Drug Release from Biodegradable Poly(DL-lactide) Drug Delivery Systems . International Journal of Pharmaceutics, 51: pp. 1–8 .

10.

Targhi, M.S. (1990). Preparation and Evaluation of Sustained Release Trinitroglycerine Capsules, Faculty of Pharmacy, University of Montreal, Montreal , p. 272-272.

11.

Mauduit, J. , Bukh, N. and Vert, M. (1993). Gentamycin/poly(lactic acid) Blends Aimed at Sustained Release Local Antibiotic Therapy Administered Per-operatively. II. The Case of Gentamycin Sulfate in High Molecular Weight Poly(DL-lactic acid) and Poly(L-lactic acid) , Journal of Controlled Release, 23: pp. 221–230 .

12.

Wu, X.S. (1995). Synthesis and Properties of Biodegradable Lactic/Glycolic Acid Polymers, In: Wise, D.L. (ed.), Encyclopedic Handbook of Biomaterials and Bioengineering, Marcel Dekker, New York , pp. 1015–1054.

13.

Rangaiah, K.V. , Chattaraj, S.C. and Das, S.K. (1997). Effects of solvents, temperature and plasticizer on film coating of tablets . Drug Development and Industrial Pharmacy, 23(4): 419XEN=–423 .

14.

Lemaire, V. , Belair, J. and Hildgen, P. (2003). Structural Modeling of Drug Release from Biodegradable Porous Matrices Based on a Combined Diffusion/Erosion Process . International Journal of Pharmaceutical Sciences, 258: 95–107 .

15.

Gennaro, A.R. (ed.) (1985). Remington's Pharmaceutical Sciences, 17th edn, Mack Publishing Company, Easton , p. 965-965.

16.

Lu, L. , Garcia, L.A. and Mikos, A.G. (1999). In VitroDegradation of Thin Poly(DL-lactic-co-glycolic acid) Films . Journal of Biomedical Materials and Research, 46: 236–244 .

17.

Shard, A. , Roberts, C.J. , Tendler, S.J.B. , Davies, M.C. , Doomb, A.J. , Kost, J. and Wiseman, D.M. (1997). Surface Characterisation of Biodegradable Polymers Using XPS, SIMS and AFM, In: Domb, J.K.A.J. and Wiseman, D.M. (eds), Handbook of Biodegradable Polymers, Harwood Academic Publishers, Amsterdam , pp. 417–449.