Although the number of fires continuously decreases, there are still too many fatalities. A comprehensive review of fire statistics shows upholstered furniture to cause most fire deaths, followed by electrical distribution fires. In transportation, car and bus fires are a major problem. European and US fire regulations provide a reasonable level of fire safety, but too low for cars and buses. The elimination of the open-flame upholstered furniture test in California is problematic. The fire safety performance levels that flame-retarded products achieve in mandatory fire tests and full-scale studies show the efficacy of flame retardants and of barriers. Flame retardants are not generally unsafe for humans and the environment. European Registration, Evaluation, Authorisation and Restriction of Chemicals, US Environmental Protection Agency studies, and GreenScreen show ways to identify safer flame retardant systems. A balanced approach involving facts from fire statistics, adapting fire regulations, and improving products fire safety will help to reduce fire losses.
Royal Aeronautical Society. Smoke, fire and fumes in transport aircraft (Part 1:references). 2nd ed.March2013, p. 21, http://flightsafety.org/files/RAESSFF.pdf (accessed December 2014).
EN 13501-1:2007 + A1:2009. Fire classification of construction products and building elements—part 1: classification using data from reaction to fire tests.
73.
EN ISO 11925-2:2010. Reaction to fire tests—ignitability of products subjected to direct impingement of flame—part 2: single-flame source test.
74.
EN 13823:2010. Reaction to fire tests for building products—building products excluding floorings exposed to the thermal attack by a single burning item.
75.
EN 13501-6:2014. Fire classification of construction products and building elements—part 6: classification using data from reaction to fire tests on electric cables.
76.
EN 60332-1:2004. Tests on electric and optical fibre cables under fire conditions—part 1-1: test for vertical flame propagation for a single insulated wire or cable—apparatus; Part 1-2: test for vertical flame propagation for a single insulated wire or cable—procedure for 1 kW pre-mixed flame.
77.
IEC 60332-3-10:2009. Tests on electric and optical fibre cables under fire conditions—part 3-10: test for vertical flame spread of vertically-mounted bunched wires or cables—apparatus.
78.
EN 50399:2011. Common test methods for cables under fire conditions—heat release and smoke production measurement on cables during flame spread test—test apparatus, procedures, results.
UNECE Regulation No. 34. Uniform provisions concerning the approval of vehicles with regard to the prevention of fire risks. Regulation 5: 5. Requirements for liquid fuel tanks E/ECE/TRANS/505/Rev.1/Add.33/Rev.2, 20December2012.
88.
DiggesKHGannRGGraysonSJ. Improving survivability in motor vehicle fires. In: Proceedings of the interflam 2007, London, 3–5 September 2007, pp. 135–143. London: Interscience Communications.
89.
ISO 6941:2003. Textile fabrics—burning behaviour—measurement of flame spread properties of vertically oriented specimens (Reviewed in 2014).
90.
NF P92-505:1995-12-01. Safety against fire: building materials—reaction to fire tests: test used for thermal melting materials—dripping test.
91.
Regulation No 118 of the Economic Commission for Europe of the United Nations (UN/ECE)—uniform technical prescriptions concerning the burning behaviour of materials used in the interior construction of certain categories of motor vehicles. 10.7.2010. Official Journal of the European Union, L 177/263 (Last revision in 2013).
92.
ISO 6722-1:2011. Road vehicles—60 V and 600 V single-core cables—part 1: dimensions, test methods and requirements for copper conductor cables.
93.
FörsthM. Bus fire safety—state of the art and new challenges. SP Technical Research Institute of Sweden, SP Report, Berlin, 1–2 October 2014, p. 39.
94.
EN 45545-2:2013. Railway applications—fire protection on railway vehicles—part 2: requirements for fire behaviour of materials and components.
95.
ISO 5658-2:2006. Reaction to fire tests—spread of flame—part 2: lateral spread on building and transport products in vertical configuration.
96.
ISO 5660-1:2002-12. Reaction-to-fire tests—heat release, smoke production and mass loss rate—part 1: heat release rate (cone calorimeter method).
97.
EN ISO 4589-2:1999 + A1:2006. Plastics—determination of burning behaviour by oxygen index—part 2: ambient-temperature test.
98.
49CFR Part 238, Appendix B to Part 238. Test methods and performance criteria for the flammability and smoke emission characteristics of materials used in passenger cars and locomotive cabs. 49 CFR Ch. II (1October2012 Edition).
99.
NFPA 130:2014. Standard for fixed guideway transit and passenger rail systems.
100.
ASTM E162-15:2015. Standard test method for surface flammability of materials using a radiant heat energy source.
101.
ASTM D3675-14:2014. Standard test method for surface flammability of flexible cellular materials using a radiant heat energy source.
102.
UL 1685:2015. Standard for vertical-tray fire-propagation and smoke-release test for electrical and optical-fiber cables.
ISO 6940:2004. Textile fabrics—burning behaviour—determination of ease of ignition of vertically oriented specimens.
105.
Furniture—assessment of the ignitability of upholstered furniture; EN 1021-1:2014 part 1: ignition source smouldering cigarette; EN 1021-2:2006 part 2: ignition source match flame equivalent.
106.
Furniture—assessment of the ignitability of mattresses and upholstered bed bases; prEN 597-1:2014 Part 1: ignition source: smouldering cigarette; prEN 597-2:2014 Part 2: ignition source: match flame equivalent.
107.
Appendix F to Part 25 Part I—test criteria and procedures for showing compliance with § 25.853, or § 25.855. 14 CFR Ch. I, p. 554 (1January2012 Edition).
108.
FAA 14 CFR Part 25 (1January2012 Edition); Appendix F part 2: flammability of seat cushions, p. 556; Appendix F part 4: test method to determine the heat released rate from cabin materials exposed to radiant heat, p. 569; Appendix F part 6: test method to determine the flammability and flame propagation characteristics of thermal/acoustic insulation materials, p. 579; Appendix F part 7: test method to determine the burnthrough resistance of thermal/acoustic insulation materials, p. 589.
109.
IEC 60695-11-10:2010. Fire hazard testing—part 11-10: test flames—50 W horizontal and vertical flame test methods.
110.
IEC 60695-11-20:1999 + A1:2003. Fire hazard testing—part 11-20: test flames—500 W flame test methods.
111.
IEC 60695-11-5:2004. Fire hazard testing—part 11-5: test flames—needle-flame test method—apparatus, confirmatory test arrangement and guidance.
112.
EN 60695-2-11:2014. Fire hazard testing—part 2-11: glowing/hot-wire based test methods—glow-wire flammability test method for end-products (GWEPT); EN 60695-2-12:2014. Glowing/hot-wire based test methods—glow-wire flammability index (GWFI) test method for materials; EN 60695-2-13:2014. Glowing/hot-wire based test methods—glow-wire ignition temperature (GWIT) test method for materials.
113.
BS 5852-1:1979. Fire tests for furniture. Methods of test for the ignitability by smokers’ materials of upholstered composites for seating; BS 5852-2:1982. Fire tests for furniture. Methods of test for the ignitability of upholstered composites for seating by flaming sources.
114.
BS 5852:1990. Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources.
115.
Furniture and Furnishings (Fire) (Safety) Regulations1988. Consultation on proposed amendments to schedule 5: the match test—part 1 and schedule 4—the cigarette test. Department for Business Innovations and Skills, London, August2014.
116.
Requirements, test procedure and apparatus for testing the smolder resistance of materials used in upholstered furniture. Technical Bulletin 117-2013, January2013. North Highlands, CA: State of California.
117.
Requirements, test procedure and apparatus for testing the flame retardance of resilient filling materials used in upholstered furniture. Technical Bulletin 117, March2000. North Highlands, CA: State of California.
118.
HallJRJr. A guide to the upholstered furniture fire problem and TB 117. Fire Safety Science News, February2014, no. 36, pp. 22–23.
119.
Proposed Standard NFPA 277. Standard methods of tests for evaluating fire and ignition resistance of upholstered furniture using a flaming ignition source.
120.
Federal Register, vol. 71, no. 50/Wednesday, March 15, 2006/Rules and Regulations, 13472, Consumer Product Safety Commission—16 CFR Part 1633: standard for the flammability (open flame) of mattress sets; final rule, https://www.cpsc.gov//PageFiles/95861/mattsets.pdf
MorganA.Why flame retardants are used: insights from a flame retardant chemist. Fire Safety Science News, March2013, no. 34, pp. 34–36.
126.
HirschlerM.Flame retardants and heat release: review of traditional studies on products and on groups of polymers. Fire Mater2015; 39(3): 207–231 (Also published in review of data on individual polymers. Fire Mater 2015; 39(3): 232–258).
127.
BabrauskasVHarrisRHGannRG. Fire hazard comparison of fire-retarded and non-fire-retarded products. NBS Special Publication 749, July1988. Gaithersburg, MD: NBS.
128.
TroitzschJH.Flammability and fire behaviour of TV sets. Presented at the sixth international symposium of fire safety science, Poitiers, 5–9 July 1999.
129.
SimonsonMBlomqvistPBoldizarA. Fire-LCA model: TV case study. SP report 2000:13, 2000. Borås: Swedish National Testing and Research Institute, Fire Technology.
130.
AnderssonPSimonsonMStrippleH.Fire safety of upholstered furniture—LCA analysis. SP report 2003:22, 2003. Borås: Swedish National Testing and Research Institute, Fire Technology.
131.
SimonsonMAnderssonPRosellL. Fire-LCA model: cables case study. SP report 2001:22, 2001. Borås: Swedish National Testing and Research Institute, Fire Technology.
132.
BlaisMSHirschlerMMJanssensML. Fire performance of polyurethane foam: California technical bulletin CA TB 117 and British Standard BS 5852. In: Proceedings of the fire and materials conference, San Francisco, CA, 28–30 January 2013, pp. 319–330. London: Interscience Communications.
133.
BlaisMSCarpenterK.Combustion characteristics of flat panel televisions with and without fire retardants in the casing. Fire Technol. Epub ahead of print 28 September 2014. DOI: 10.1007/s10694-014-0420-7.
134.
ISO 834-1:1999-09. Fire-resistance tests—elements of building construction—part 1: general requirements.
135.
ASTM E119:2015. Standard test methods for fire tests of building construction and materials.
136.
EN 1363-1:2012. Fire resistance tests—part 1: general requirements.
137.
FabianT.Upholstered furniture flammability. Research report, Underwriters Laboratories, Inc., Northbrook, IL, 31July2013.
138.
NazareäSDavisRD.A review of fire blocking technologies for soft furnishings. Fire Sci Rev2012; 1: 1.
