The exponential growth of electrical devices in Internet of things and e-vehicles will lead to new fire safety challenges. As electric fires rank second among all fires and electrical equipment recalls show safety gaps, fire safety requirements must be better enforced and improved. The analysis of the current qualitative pass/fail requirements for electrotechnical products shows that they provide a basic level of fire safety. Fire testing of car and bus interiors, mandatory worldwide, is too low level. Alternative tests, such as the microscale combustion calorimeter, are discussed. Buses have to comply with additional fire tests. E-vehicles must meet a fire exposure test for electric powertrain and specifications to prevent thermal runaway of batteries. Charging stations must comply with fire and overheating requirements for enclosures, plugs, and sockets. Passive fire safety needs are primarily met by using flame retardants, and for preventing thermal runaway of batteries, by intumescent coatings, interlayers, and ceramifying products.
IEC 60695—1—10:2016. Fire hazard testing—part 1-10: guidance for assessing the fire hazard of electrotechnical products—general guidelines.
19.
IEC 60695—2—10: 2021 RLV. Fire hazard testing—part 2—10: glowing/hot—wire based test methods—glow-wire apparatus and common test procedure.
20.
IEC 60695—2—11: 2021 RLV. Fire hazard testing—part 2—11: glowing/hot—wire based test methods—glow-wire flammability test method for end products (GWEPT).
21.
IEC 60695—2—12: 2021 RLV. Fire hazard testing—part 2—12: glowing/hot—wire based test methods—glow-wire flammability index (GWFI) test method for materials.
22.
IEC 60695—2—13: 2021 RLV. Fire hazard testing—part 2—13: glowing/hot—wire based test methods—glow-wire ignition temperature (GWIT) test method for materials.
23.
IEC 60695—11—5: 2016 RLV. Fire hazard testing—part 11—5: test flames—needle—flame test method—apparatus, confirmatory test arrangement and guidance.
24.
IEC 60695—11—10:2013. Fire hazard testing—part 11—10: test flames—50 W horizontal and vertical flame test methods.
25.
UL 94 Ed. 6-2013. Standard for tests for flammability of plastic materials for parts in devices and appliances.
26.
IEC 60695-11-20:2015. Fire hazard testing—part 11—20: test flames—500 W flame test method.
27.
ASTM D7309-21. Standard test method for determining flammability characteristics of plastics and other solid materials using microscale combustion calorimetry.
HuczekJJanssensMCabinessS, et al. Potential alternative methodology for evaluating flammability of interior automotive materials. Report No. DOT HS 812 091, April2021. Washington, DC: National Highway Traffic Safety Administration.
30.
ASTM E2574/E2574M-12. Standard test method for fire testing of school bus seat assemblies.
31.
UN-ECE-R 118:2019. Uniform technical prescriptions concerning the burning behaviour of materials used in the interior construction of certain categories of motor vehicles.
UL 2594. Ed. 2-2016. Standard for electric vehicle supply equipment.
34.
UL 2202. Ed. 2-2009. ANSI approved2018. Standard for electric vehicle (EV) charging system equipment.
35.
UL 723. Ed 11-2018. Standard for test for surface burning characteristics of building materials.
36.
ASTM E162-21. Standard test method for surface flammability of materials using a radiant heat energy source.
37.
UL 2251. Ed. 4-2017. Standard for plugs, receptacles, and couplers for electric vehicles.
38.
IEC 61851—1:2017. Electric vehicle conductive charging system—part 1: general requirements.
39.
IEC 61439-1:2020. Low-voltage switchgear and controlgear assemblies—part 1: general rules.
40.
IEC 62196—1:2014. Plugs, socket—outlets, vehicle connectors and vehicle inlets—conductive charging of electric vehicles—part 1: general requirements.
41.
MikolajczakCKahnMWhiteK, et al. Lithium-ion batteries hazard and use assessment. Final Report, Fire Protection Research Foundation, Quincy, MA, July2011.
42.
RuizVPfrangAKristonA, et al. A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles. Renew Sustain Energ Rev2018; 81(1): 1427–1452.
LarssonFMellanderBE.Lithium—ion batteries used in electrified vehicles—general risk assessment and construction guidelines from a fire and gas release perspective. SP Rapport2017: 41: 1–25.
TroitzschJH. Flammability and fire behaviour of TV sets. In: Proceedings of the 6th international symposium of fire safety science, Poitiers, 5–9 July 1999.
BlaisMSCarpenterK.Combustion characteristics of flat panel televisions with and without fire retardants in the casing. Fire Technol2015; 51: 19–40.
58.
BlaisMSCarpenterKFernandezK.Comparative room burn study of furnished rooms from the United Kingdom, France and the United States. Fire Technol2020; 56: 489–514.
Commission Delegated Directive (EU) 2015/863 of 31 March 2015 amending Annex II to Directive 2011/65/EU of the European Parliament and of the Council as regards the list of restricted substances, http://data.europa.eu/eli/dir_del/2015/863/oj (accessed January 2022).
