Flame Retardancy of Polycarbonate upon Repeated Recycling

Abstract

In this study, two polycarbonates are put through multiple cycles of a process that involves drying the resin, extruding, and pelletizing it, drying the pellets and injection molding them into test specimens, followed by granulation. While one of the polycarbonates contain potassium diphenylsulfone sulfonate (KSS) as a flame retardant, the other polycarbonate is flame retarded with bromine. The recycling process is repeated up to eight times, and after each cycle, flammability and mechanical tests are conducted. Thermogravimetric analysis and capillary rheometry are also performed. It is found that both flame retardants maintain their effectiveness, but the notched Izod impact strength suffers upon recycling, with the polymer containing KSS displaying marginally better mechanical properties.

Keywords

polycarbonate recycling flame retardants potassium diphenylsulfone sulfonate cone calorimetry.

Get full access to this article

View all access options for this article.

References

Lazear, N.R. (1995). Polycarbonate: High-Performance Resin , Adv. Mater. Processes, 147: 43-45.

Hilado, C.J. (1998). Flammability Handbook for Plastics, 5th edn, Vol. 189, Technomic Publishing Co., Lancaster, PA.

Camino, G. and Costa, L. (1998). Performance and Mechanisms of Fire Retardants in Polymer - A Review, Polym . Degrad. Stab., 20: 271-294.

Cullis, C.F. (1987). The Role of Pyrolysis in Polymer Combustion and Flame Retardancy , J. Analyt. Appl. Pyrolysis, 11: 451-463.

Dumler, R. , Thoma, H. , Lenoir, D. and Hutzinger, O. (1989). Thermal formation of Polybrominated Dibenzodioxins (PBDD) and Dibenzofurans (PBDF) from Bromine Containing Flame Retardants , Chemosphere, 19: 305-308.

Levchik, S.V. and Weill, D. (2005). Review: Overview of Recent Developments in the Flame Retardancy of Polycarbonate, Polym . Int., 54: 981-998.

Webb, J.L. , Cipullo, M.J. and Louie, M.L. (1980). Mode of Action of New, Effective Fire Retardant Additives for Polycarbonate Resins, Org . Coat. Plast., 43: 79-83.

Ballistreri, A. , Montaudo, G. , Scamporrino, E. , Puglisi, C. and Vitalini, D. (1988). Intumescent Flame Retardants for Polymers. IV. The Polycarbonate-Aromatic Sulfonates System , J. Polym. Sci., Part A: Polym. Chem., 26: 2113-2127.

Ishikawa, T. , Maki, I. , Koshizuda, T. , Ohkawa, T. and Takeda, K. (2004). Effect of Perfluoroalkane Sulfonic Acid on the Flame Retardancy of Polycarbonate , J. Macromol. Sci. - Pure Appl. Chem., A41: 523-535.

10.

Wang, Y.-Z. , Yi, B. , Wu, B. , Yang, B. And Liu, Y. (2003). Thermal Behaviors of Flame-Retardant Polycarbonates Containing Diphenyl Sulfonate and Poly(sulfonyl phenylene phosphate) , J. Appl. Polym. Sci., 89: 882-889.

11.

Innes, J. and Innes, A. (2005). Technology Advances in Polycarbonate Flame Retardants , In: Addcon World 2005, Eleventh Intl. Plasst . Additives and Modifiers Conf., Hamburg, Germany.