The mechanical recycling of polylactic acid composites reinforced with wood fibres was studied by multiple extrusions. The composite material was extruded seven times, and the mechanical and thermal properties were monitored by tensile tests, flexural tests, differential scanning calorimetry, Fourier-transform infrared and scanning electron microscopy. The results showed that the material retained its mechanical properties relatively well, for up to five cycles after which the tensile strength decreased by 23%. Thermal characterisation further showed that the glass transition temperature (Tg) shifted several degrees centigrade towards lower temperatures, further indicating degradation of the polylactic acid polymer. Characterisation was also done on composite material, which was aged hydrothermally between each extrusion cycle in order to simulate post-consumer recycling of composite products, which had been exposed to water. Samples were aged at 50℃ in distilled water for 5 days. The thermal and mechanical testing showed that the material survived the ageing test fairly well.
AbadMJAresABarralL. Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing. J Appl Polym Sci2004; 92: 3910–3916.
2.
MendesAACunhaAMBernardoCA. Study of the degradation mechanisms of polyethylene during reprocessing. Polym Degrad Stab2011; 96: 1125–1133.
3.
PattanakulCSelkeSLaiC. Properties of recycled high density polyethylene from milk bottles. J Appl Polym Sci1991; 43: 2147–2150.
4.
da CostaHMRamosVDde OliveiraMG. Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance. Polym Test2007; 26: 676–684.
5.
da CostaHMRamosVDRochaMCG. Rheological properties of polypropylene during multiple extrusion. Polym Test2005; 24: 86–93.
6.
DittaASWilkinsonAJMcNallyGM. A study of the processing characteristics and mechanical properties of multiple recycled rigid PVC. J Vinyl Addit Technol2004; 10: 174–178.
7.
YarahmadiNJakubowiczIMartinssonL. PVC floorings as post-consumer products for mechanical recycling and energy recovery. Polym Degrad Stab2003; 79: 439–448.
8.
SoroudiAJakubowiczI. Recycling of bioplastics, their blends and biocomposites: A review. Eur Polym J2013; 49: 2839–2858.
9.
LopezJPGironesJMendezJA. Recycling ability of biodegradable matrices and their cellulose-reinforced composites in a plastic recycling stream. J Polym Environ2012; 20: 96–103.
10.
ŻenkiewiczMRichertJRytlewskiP. Characterisation of multi-extruded poly(lactic acid). Polym Test2009; 28: 412–418.
11.
PillinIMontrelayNBourmaudA. Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid). Polym Degrad Stab2008; 93: 321–328.
12.
AydınMTozluHKemalogluS. Effects of alkali treatment on the properties of short flax fiber–poly(lactic acid) eco-composites. J Polym Environ2011; 19: 11–17.
13.
Xiao-YunWQiu-HongWHuangG. Research on mechanical behavior of the flax/polyactic acid composites. J Reinf Plast Compos2010; 29: 2561–2567.
14.
JiangAXiJWuH. Effect of surface treatment on the morphology of sisal fibers in sisal/polylactic acid composites. J Reinf Plast Compos2012; 31: 621–630.
FuWXuXWuH. Mechanical and biodegradable properties of l-lactide-grafted sisal fiber reinforced polylactide composites. J Reinf Plast Compos2014; 33: 2034–2045.
17.
AraoYFujiuraTItaniS. Strength improvement in injection-molded jute-fiber-reinforced polylactide green-composites. Compos Part B: Eng2015; 68: 200–206.
18.
ChenXRenJZhangN. Effects of heat treatment on the thermal and mechanical properties of ramie fabric-reinforced poly(lactic acid) biocomposites. J Reinf Plast Compos2015; 34: 28–36.
CsizmadiaRFaludiGRennerK. PLA/wood biocomposites: Improving composite strength by chemical treatment of the fibers. Compos Part A: Appl Sci Manuf2013; 53: 46–53.
21.
PillaSGongSO'NeillE. Polylactide-pine wood flour composites. Polym Eng Sci2008; 48: 578–587.
22.
AdhikaryKBPangSStaigerMP. Dimensional stability and mechanical behaviour of wood–plastic composites based on recycled and virgin high-density polyethylene (HDPE). Compos Part B: Eng2008; 39: 807–815.
23.
FabiyiJMcDonaldAMcIlroyD. Wood modification effects on weathering of HDPE-based wood plastic composites. J Polym Environ2009; 17: 34–48.
24.
MaitiSNSinghK. Influence of wood flour on the mechanical properties of polyethylene. J Appl Polym Sci1986; 32: 4285–4289.
25.
DányádiLRennerKMóczóJ. Wood flour filled polypropylene composites: Interfacial adhesion and micromechanical deformations. Polym Eng Sci2007; 47: 1246–1255.
26.
XieLGruenebergTSteuernagelL. Influence of particle concentration and type on flow, thermal, and mechanical properties of wood-polypropylene composites. J Reinf Plast Compos2010; 29: 1940–1951.
27.
SombatsompopNChaochanchaikulKPhromchirasukC. Effect of wood sawdust content on rheological and structural changes, and thermo-mechanical properties of PVC/sawdust composites. Polym Int2003; 52: 1847–1855.
28.
Flores-HernándezMGonzálezIRLomelí-RamírezM. Physical and mechanical properties of wood plastic composites polystyrene-white oak wood flour. J Compos Mater2014; 48: 209–217.
29.
BegMDHPickeringKL. Reprocessing of wood fibre reinforced polypropylene composites. Part I: Effects on physical and mechanical properties. Compos Part A: Appl Sci Manuf2008; 39: 1091–1100.
30.
DeroinéMLe DuigouACorreY-M. Accelerated ageing of polylactide in aqueous environments: Comparative study between distilled water and seawater. Polym Degrad Stab2014; 108: 319–329.
31.
Le DuigouADaviesPBaleyC. Seawater ageing of flax/poly(lactic acid) biocomposites. Polym Degrad Stab2009; 94: 1151–1162.
32.
YewGHMohd YusofAMMohd IshakZA. Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites. Polym Degrad Stab2005; 90: 488–500.
33.
BerthéVFerryLBénézetJC. Ageing of different biodegradable polyesters blends mechanical and hygrothermal behavior. Polym Degrad Stab2010; 95: 262–269.
34.
ŻenkiewiczMMalinowskiRRytlewskiP. Some composting and biodegradation effects of physically or chemically crosslinked poly(lactic acid). Polym Test2012; 31: 83–92.
Le DuigouAPillinIBourmaudA. Effect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites. Compos Part A: Appl Sci Manuf2008; 39: 1471–1478.
37.
TaubnerVShishooR. Influence of processing parameters on the degradation of poly(L-lactide) during extrusion. J Appl Polym Sci2001; 79: 2128–2135.
38.
BadiaJDStrömbergEKarlssonS. Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance. Polym Degrad Stab2012; 97: 670–678.
39.
ShahBLSelkeSEWaltersMB. Effects of wood flour and chitosan on mechanical, chemical, and thermal properties of polylactide. Polym Compos2008; 29: 655–663.
40.
IslamMSPickeringKLForemanNJ. Influence of hygrothermal ageing on the physico-mechanical properties of alkali treated industrial hemp fibre reinforced polylactic acid composites. J Polym Environ2010; 18: 696–704.
41.
GrizziIGarreauHLiS. Hydrolytic degradation of devices based on poly(dl-lactic acid) size-dependence. Biomaterials1995; 16: 305–311.
42.
Gil-CastellOBadiaJDKittikornT. Hydrothermal ageing of polylactide/sisal biocomposites. Studies of water absorption behaviour and Physico-Chemical performance. Polym Degrad Stab2014; 108: 212–222.
