Among biobased and biodegradable polymers, polylactic acid (PLA) is most widely used one. However, its poor mechanical properties need to be enhanced. In this study, PLA blend film with improved mechanical properties were developed without compromising any bio-content. For this, natural rubber derivative with acetate pendant group (ANR) and PLA blend films were prepared. First, natural rubber was epoxidized, and then partial acetylation was achieved by the ring-opening reaction of the epoxy groups. The epoxidation and the acetylation were examined by FTIR analysis. 1H-NMR spectrum revealed a 29% epoxidation and 8.25% acetylation degree. The Tg of natural rubber (−66°C) increased to −41°C and −31°C after epoxidation and acetylation, respectively. The compatibility of ENR and ANR with PLA was evident from the DSC results and Molau test. The morphology of PLA blend film containing 25 wt% of ANR (ANR25) was observed as well-dispersed fine droplets by SEM images. The tensile strength, elastic modulus, and yield strength of ANR25 were measured as 11.6 MPa, 397.3 MPa, and 6.9 MPa, respectively. These values are considerably higher than neat PLA film. Compared to reported studies on PLA toughening so far, increments in both the strength and elongation of ANR25 were observed by tensile tests. Moreover, highest toughness among all samples was determined as 18.8 MJm−3 for ANR25, which is 1.8 times higher than neat PLA. Thus, a strong and tough bio-based PLA blend was developed for film application such as packaging and sheeting.
ZhengJSuhS. Strategies to reduce the global carbon footprint of plastics. Nat Clim Chang2019; 9: 374–378. DOI: 10.1038/s41558-019-0459-z.
2.
AyutthayaWDNPoompradubS. Thermal and mechanical properties of poly(lactic acid)/natural rubber blend using epoxidized natural rubber and poly(methyl methacrylate) as co-compatibilizers. Macromol Res2014; 22: 686–692. DOI: 10.1007/s13233-014-2102-1.
SiracusaVBlancoI. Bio-Polyethylene (Bio-PE), Bio-Polypropylene (Bio-PP) and Bio-Poly(ethylene terephthalate) (Bio-PET): Recent Developments in Bio-Based Polymers Analogous to Petroleum-Derived Ones for Packaging and Engineering Applications. Polymers2020; 12. 1641. DOI: 10.3390/polym12081641.
5.
KunduJPatiFHun JeongY, et al.Chapter 2 - Biomaterials for Biofabrication of 3D Tissue Scaffolds. In: ForgacsGSunW (eds) BiofabricationBoston: William Andrew Publishing, 2013, pp.23–46.
6.
ChenGQPatelMK. Plastics Derived from Biological Sources: Present and Future: A Technical and Environmental Review. Chem Rev2012; 112: 2082–2099. DOI: 10.1021/cr200162d.
7.
ScaffaroRBottaLLoprestiF, et al.Polysaccharide nanocrystals as fillers for PLA based nanocomposites. Cellulose2017; 24: 447–478. DOI: 10.1007/s10570-016-1143-3.
8.
NofarMSacligilDCarreauPJ, et al.Poly (lactic acid) blends: Processing, properties and applications. Int J Biol Macromol2019; 125: 307–360. DOI: 10.1016/j.ijbiomac.2018.12.002.
WongwatSYoksanRHedenqvistMS. Bio-based thermoplastic natural rubber based on poly(lactic acid)/thermoplastic starch/calcium carbonate nanocomposites. Int J Biol Macromol2022; 208: 973–982. DOI: 10.1016/j.ijbiomac.2022.03.175.
12.
Mohd AmranNAAhmadSChenRS, et al.Assessment of Mechanical and Electrical Performances of Polylactic Acid/Liquid Natural Rubber/Graphene Platelets Nanocomposites in the Light of Different Graphene Platelets Functionalization Routes. Macromol Chem Phys2021; 222: 2100185. DOI: 10.1002/macp.202100185.
13.
DaneshpayehSGhasemiFAGhasemiI. The effect of nanoparticles shape on the mechanical properties of poly lactic acid matrix. Journal of Elastomers and Plastics2021; 53: 684–697. DOI: 10.1177/0095244320988168.
14.
JiaSZhaoLWangX, et al.Poly (lactic acid) blends with excellent low temperature toughness: A comparative study on poly (lactic acid) blends with different toughening agents. Int J Biol Macromol2022; 201: 662–675. DOI: 10.1016/j.ijbiomac.2022.01.126.
15.
MacoskoCW. Morphology development and control in immiscible polymer blends. Macromol Symp2000; 149: 171–184. DOI: 10.1002/1521-3900.
16.
MoX-ZWeiF-XTanD-F, et al.The compatibilization of PLA-g-TPU graft copolymer on polylactide/thermoplastic polyurethane blends. J Polym Res2020; 27: 33. DOI: 10.1007/s10965-019-1999-7.
17.
Mokhtari AghdamiRMousaviSREstajiS, et al.Evaluating the mechanical, thermal, and antibacterial properties of poly (lactic acid)/silicone rubber blends reinforced with (3-aminopropyl) triethoxysilane-functionalized titanium dioxide nanoparticles. Polym Compos. 2022, 43, 4165–4178, DOI: 10.1002/pc.26679.
18.
de AlmeidaJFMde OliveiraAGde SousaAMF, et al.Toughness improvement of poly(lactic acid) by the addition of pre-crosslinked powdered nitrile rubber/CaCO(3)for thermoforming molding. J Elastomers Plast2021; 53: 565–582. DOI: 10.1177/0095244320958108.
19.
JiangJDSuLLZhangK, et al.Rubber-toughened PLA blends with low thermal expansion. J Appl Polym Sci2013; 128: 3993–4000. DOI: 10.1002/app.38642.
20.
BitinisNVerdejoRCassagnauP, et al.Structure and properties of polylactide/natural rubber blends. Mater Chem Phys2011; 129: 823–831. DOI: DOI: 10.1016/j.matchemphys.2011.05.016.
21.
PongtanayutKThongpinCSantawiteeO. The Effect of Rubber on Morphology, Thermal Properties and Mechanical properties of PLA/NR and PLA/ENR blends. Energy Procedia2013; 34: 888–897, doi:10.1016/j.egypro.2013.06.826.
22.
ZhangCWangWHuangY, et al.Thermal, mechanical and rheological properties of polylactide toughened by expoxidized natural rubber. Materials and Design2013; 45: 198–205. DOI: 10.1016/j.matdes.2012.09.024.
23.
TessananWPhinyocheepP. Toughening modification of poly(lactic acid) using modified natural rubber. Iran Polym J2022; 31: 455–469. DOI: 10.1007/s13726-021-01000-0.
24.
KlinkajornJTanrattanakulV. Compatibilization of poly(lactic acid)/epoxidized natural rubber blend with maleic anhydride. J Appl Polym Sci2020; 137. 48297. DOI: 10.1002/app.48297.
25.
ChumekaWTanrattanakulVPilardJ-F, et al.Effect of Poly(Vinyl Acetate) on Mechanical Properties and Characteristics of Poly(Lactic Acid)/Natural Rubber Blends. J Polym Environ2013; 21: 450–460. DOI: 10.1007/s10924-012-0531-5.
26.
PhetphaisitCWWapanyakulWPhinyocheepP. Effect of modified rubber powder on the morphology and thermal and mechanical properties of blown poly(lactic acid)–hydroxyl epoxidized natural rubber films for flexible film packaging. J Appl Polym Sci2019; 136: 47503. DOI: 10.1002/app.47503.
27.
ChenYYuanDXuC. Dynamically Vulcanized Biobased Polylactide/Natural Rubber Blend Material with Continuous Cross-Linked Rubber Phase. ACS Appl Mater Interfaces2014; 6: 3811–3816. DOI: 10.1021/am5004766.
28.
CandauNAlbiterNLCollPR, et al.Dynamically vulcanized polylactic acid/natural rubber/waste rubber blends: Effect of the crosslinking agent on the morphology and tensile properties. J Appl Polym Sci2022; 139: e53001. DOI: 10.1002/app.53001.
29.
QiJYangZOuY, et al.Supertough polylactide-based materials with fast shrinking property by stereocomplex crystallites through in situ reactive blending. Industrial Crops and Products2022; 187: 115326. DOI: 10.1016/j.indcrop.2022.115326.
30.
QuYChenYLingX, et al.Reactive Micro-Crosslinked Elastomer for Supertoughened Polylactide. Macromolecules2022; 55: 7711–7723. DOI: 10.1021/acs.macromol.2c00824.
31.
QuynhTMMitomoHNagasawaN, et al.Properties of crosslinked polylactides (PLLA and PDLA) by radiation and its biodegradability. Eur Polym J2007; 43: 1779–1785. DOI: 10.1016/j.eurpolymj.2007.03.007.
32.
Khalaj AmniehSMosaddeghPMashayekhiM, et al.Biodegradation evaluation of poly (lactic acid) for stent application: Role of mechanical tension and temperature. J Appl Polym Sci2021; 138: 50389. DOI: 10.1002/app.50389.
33.
TosakulTSuetongPChanthotP, et al.Degradation of polylactic acid and polylactic acid/natural rubber blown films in aquatic environment. J Polym Res2022; 29: 242, DOI: 10.1007/s10965-022-03039-w.
34.
AzharNHARasidHMYusoffSFM. Chemical modifications of liquid natural rubber. AIP Conf Proc2016; 1784: 30024. DOI: 10.1063/1.4966762.
35.
KarimWNANgJGChanCH, et al.Polymer electrolyte blends of mono-carboxylic acid-modified epoxidized natural rubber and poly(ethyleneoxide). Rubber Chem Technol2018; 91: 120–135. DOI: 10.5254/rct.18.83718.
36.
ArayapraneeWRempelGL. Synthesis and Mechanical Properties of Diimide-Hydrogenated Natural Rubber Vulcanizates. J Appl Polym Sci2009; 114: 4066–4075. DOI: 10.1002/app.31132.
37.
SaramoleePLopattananonNSahakaroK. Preparation and some properties of modified natural rubber bearing grafted poly(methyl methacrylate) and epoxide groups. European Polymer Journal2014; 56: 1–10. DOI: DOI: 10.1016/j.eurpolymj.2014.04.008.
38.
HamzahRBakarMADahhamOS, et al.A structural study of epoxidized natural rubber (ENR-50) ring opening under mild acidic condition. J Appl Polym Sci2016; 133. DOI: 10.1002/app.44123.
39.
DongXLiuLWangY, et al.The compatibilization of poly (propylene carbonate)/poly (lactic acid) blends in presence of core-shell starch nanoparticles. Carbohydr Polym2021; 254: 117321. DOI: 10.1016/j.carbpol.2020.117321.
40.
ParasharPRamakrishnaKRamaprasadAT. A Study on Compatibility of Polymer Blends of Polystyrene/Poly(4-vinylpyridine). J Appl Polym Sci2011; 120: 1729–1735. DOI: 10.1002/app.33314.
41.
AgapovALWangYYKunalK, et al.Effect of Polar Interactions on Polymer Dynamics. Macromolecules2012; 45: 8430–8437. DOI: 10.1021/ma301489c.
42.
HarunFChanCH. Electronic Applications of Polymer Electrolytes of Epoxidized Natural Rubber and Its Composites. In: PonnammaDSadasivuniKKWanC, et al (eds) Flexible and Stretchable Electronic Composites. Switzerland: Springer, 2016, pp. 37–59.
43.
WangKDengQB. The Thermal and Mechanical Properties of Poly(ethylene-co-vinyl acetate) Random Copolymers (PEVA) and its Covalently Crosslinked Analogues (cPEVA). Polymers2019; 11: 1055, DOI: 10.3390/polym11061055.
44.
ArdhyanantaHKawauchiTIsmailH, et al.Effect of pendant group of polysiloxanes on the thermal and mechanical properties of polybenzoxazine hybrids. Polymer2009; 50: 5959–5969. DOI: 10.1016/j.polymer.2009.10.001.
45.
CataldoF. Chlorination and bromination of epoxidized natural-rubber (enr). J Appl Polym Sci1992; 45: 1705–1710. DOI: 10.1002/app.1992.070451003.
46.
KlinkajornJTanrattanakulV. The effect of epoxide content on compatibility of poly(lactic acid)/epoxidized natural rubber blends. J Appl Polym Sci2020; 137: 48996, DOI: 10.1002/app.48996.
47.
FischerEWSterzelHJWegnerG. Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions. Kolloid-Z U Z Polymere1973; 251: 980–990. DOI: 10.1007/BF01498927.
48.
MolauGE. Heterogeneous polymer systems. II. Mechanism of stabilization of polymeric oil-in-oil emulsions. J Polym Sci A Gen Pap1965; 3: 4235–4242. DOI: DOI: 10.1002/pol.1965.100031219.
49.
SunZWenJWangW, et al.A reactive compatibilizer for polydimethylsiloxane-polyurethane composite coating. Prog Org Coat2021; 152: 106118. DOI: 10.1016/j.porgcoat.2020.106118.
50.
Otero NavasIKamkarMArjmandM, et al.Morphology Evolution, Molecular Simulation, Electrical Properties, and Rheology of Carbon Nanotube/Polypropylene/Polystyrene Blend Nanocomposites: Effect of Molecular Interaction between Styrene-Butadiene Block Copolymer and Carbon Nanotube. Polymers2021; 13: 230.
51.
WillemseRCPosthuma de BoerAvan DamJ, et al.Co-continuous morphologies in polymer blends: the influence of the interfacial tension. Polymer1999; 40: 827–834. DOI: 10.1016/S0032-3861(98)00307-3.
52.
FengSYZhangFAhmedS, et al.Physico-Mechanical and Antibacterial Properties of PLA/TiO2 Composite Materials Synthesized via Electrospinning and Solution Casting Processes. Coatings2019; 9. 525, DOI: 10.3390/coatings9080525.
53.
LiuDYYuanXWBhattacharyyaD, et al.Characterisation of solution cast cellulose nanofibre - reinforced poly(lactic acid). Express Polym Lett2010; 4: 26–31. DOI: 10.3144/expresspolymlett.2010.5.
54.
PohBTKhokGK. Tensile property of epoxidized natural rubber/natural rubber blends. Polymer-Plastics Technology and Engineering2000; 39: 151–161. DOI: 10.1081/ppt-100100021.
55.
SripornsawatBThitithammawongATulapholS, et al.Positive Synergistic Effects on Vulcanization, Mechanical and Electrical Properties of Using Deep Eutectic Solvent in Natural Rubber Vulcanizates. Polym Test2021; 96: 107071, DOI: 10.1016/j.polymertesting.2021.107071.
56.
YangthongHPichaiyutSJumratS, et al.Mechanical, thermal, morphological, and curing properties of geopolymer filled natural rubber composites. J Appl Polym Sci2019; 136: 47346. DOI: 10.1002/app.47346.
57.
BartczakZ. Effect of Chain Entanglements on Plastic Deformation Behavior of Linear Polyethylene. Macromolecules2005; 38: 7702–7713. DOI: 10.1021/ma050815y.
