Layer shift has a great effect on the permeability which is a key parameter in resin transfer molding. In this paper, nine different unit cells were modeled based on the range of layer shift and decomposed into zones of characteristic yarn arrangement, respectively. For each unit cell, a set of equations was derived allowing description of the local permeability of each zone as a function of geometrical yarn parameters. The overall permeability was then modeled as a mixture of permeabilities of different zones with the electrical resistance analogy. Excellent agreement was found between predictions and experiment. Both results indicated that the channel flow had a dominant role in the whole flow through the fabrics. And the permeability values reached maximum when the empty regions were interconnected between upper and lower layers. In addition, the effect of fiber volume fraction on the differences of two extreme cases was also investigated.
DemariaCRuizETrochuF. In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: Experimental results. Polym Compos2007; 28(6): 797–811.
2.
NabovatiALlewellinEWSousaACM. Through-thickness permeability prediction of three-dimensional multifilament woven fabrics. Compos Part A–Appl Sci Manuf2010; 41(4): 453–463.
3.
SchellJSUDelegliseMBinetruyC. Numerical prediction and experimental characterization of meso-scale-voids in liquid composite moulding. Compos Part A–Appl Sci Manuf2007; 38(12): 2460–2470.
4.
ParnasRS. Liquid composite molding, Munchen, Germany: Carl Hanser, 2000.
5.
GasconsMBlancoNMayugoJA. A strategy to support design processes for fibre reinforced thermoset composite materials. Appl Compos Mater2012; 19(3–4): 297–314.
6.
YoungWB. A two-layer model for the simulation of the VARTM process with resin distribution layer. Appl Compos Mater2013; 20(6): 1305–1319.
7.
TurnerDZHjelmstadKD. Determining the 3D permeability of fibrous media using the Newton method. Compos Part B–Eng2005; 36(8): 609–618.
8.
ZhouFKuentzerNSimacekP. Analytic characterization of the permeability of dual-scale fibrous porous media. Compos Sci Technol2006; 66(55): 2795–2803.
9.
KuentzerNSimacekPAdvaniSG. Permeability characterization of dual scale fibrous porous media. Compos Part A–Appl Sci Manuf2006; 37(11): 2057–2068.
10.
Fang LC, Jiang JJ, Wang JB, et al. Effect of nesting on the out-of-plane permeability of unidirectional fabrics in resin transfer molding. Appl Compos Mater 2014. doi:10.1007/s10443-014-9403-6.
11.
FangLCJiangJJWangJB. Non-uniform capillary model for unidirectional fiber bundles considering pore size distribution. J Reinf Plast Compos2014; 33(15): 1430–1440.
12.
HuJLLiuYShaoX. Study on void formation in multi-layer woven fabrics. Compos Part A–Appl Sci Manuf2004; 35(5): 595–603.
13.
LeclercJSRuizE. Porosity reduction using optimized flow velocity in resin transfer molding. Compos Part A–Appl Sci Manuf2008; 39(12): 1859–1868.
14.
GourichonBDelégliseMBinetruyC. Dynamic void content prediction during radial injection in liquid composite molding. Compos Part A–Appl Sci Manuf2008; 39(1): 46–55.
15.
KuentzerNSimacekPAdvaniSG. Correlation of void distribution to VARTM manufacturing techniques. Compos Part A–Appl Sci Manuf2007; 38(3): 802–813.
16.
HoesKDinescuDSolH. Study of nesting induced scatter of permeability values in layered reinforcement fabrics. Compos Part A–Appl Sci Manuf2004; 35(12): 1407–1418.
17.
DunganFDSenoguzMTSastryAM. Simulations and experiments on low-pressure permeation of fabrics: Part I – 3D modeling of unbalanced fabric. J Compos Mater2001; 35(14): 1250–1284.
18.
SenoguzMTDunganFDSastryAM. Simulations and experiments on low-pressure permeation of fabrics: Part II – the variable gap model and prediction of permeability. J Compos Mater2001; 35(14): 1285–1322.
19.
EndruweitAMcGregorPLongAC. Influence of the fabric architecture on the variations in experimentally determined in-plane permeability values. Compos Sci Technol2006; 66(11–12): 1778–1792.
20.
EndruweitALongAC. A model for the in-plane permeability of triaxially braided reinforcements. Compos Part A–Appl Sci Manuf2011; 42(2): 165–172.
21.
GrujicicMChittajalluKMWalshS. Effect of shear, compaction and nesting on permeability of the orthogonal plain-weave fabric performs. Mater Chem Phys2004; 86(2): 358–369.
22.
GrujicicMChittajalluKMWalshS. Lattice Boltzmann method based computation of the permeability of the orthogonal plain-weave fabric preforms. J Mater Sci2006; 41(23): 7989–8000.
23.
LekakouCEdwardsSBellG. Computer modelling for the prediction of the in-plane permeability of non-crimp stitch bonded fabrics. Compos Part A–Appl Sci Manuf2006; 37(6): 820–825.
24.
TranTComas-CardonaSAbriakNE. Unified microporomechanical approach for mechanical behavior and permeability of misaligned unidirectional fiber reinforcement. Compos Sci Technol2010; 70(9): 1410–1418.
25.
SongYSHeiderDYounJR. Statistical characteristics of out-of-plane permeability for plain-woven structure. Polym Compos2009; 30(10): 1465–1472.
26.
NordlundMLundströmTS. Effect of multi-scale porosity in local permeability modelling of non-crimp fabrics. Transp Porous Med2008; 73(1): 109–124.
27.
LekakouCEdwardsSBellG. Computer modelling for the prediction of the in-plane permeability of non-crimp stitch bonded fabrics. Compos Part A–Appl Sci Manuf2006; 37(6): 820–825.
28.
LundströmTSFrishfeldsVJakovicsA. Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry. Compos Part A–Appl Sci Manuf2010; 41(1): 83–92.
29.
EndruweitAHarperLTTurnerTA. Random discontinuous carbon fiber preforms: experimental permeability characterization and local modelling. Polym Compos2010; 31(4): 569–580.
30.
GebartBR. Permeability of unidirectional reinforcements for RTM. J Compos Mater1992; 26(8): 1100–1133.
