Vibration-assisted melt compounding of polypropylene/carbon black composites: Processability,filler dispersion and mechanical properties

Abstract

Composites of polypropylene and carbon black were melt compounded by a vibration-assisted process. For comparison, conventional extrusion was also used for preparation of the same composites. A throughput of the vibration-assisted process was established to be higher than that of conventional extrusion. Microscopic images of the extrudates demonstrated better dispersion of the fillers when the vibration force field was applied. The mechanical properties and viscoelastic behavior of the composites were studied and the results were discussed in the context of the reinforcing action of the fillers and the higher level of polypropylene chain scission accompanying the vibration-assisted process.

Keywords

Isotactic polypropylene carbon black viscosity reduction dispersion

Get full access to this article

View all access options for this article.

References

Grady

. Recent developments concerning the dispersion of carbon nanotubes in polymers. Macromol Rapid Commun 2010; 31: 247–257.

McClory

Chin

McNally

. Polymer/carbon nanotube composites. Aust J Chem 2009; 62: 762–785.

Grace

. Dispersion phenomena in high viscosity immiscible fluid system and application of static mixers as dispersion devices in such systems. Chem Eng Commun 1982; 14: 225–277.

Dennis

Hunter

Chang

. Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites. Polymer 2001; 42: 9513–9522.

Tokihisa

Yakemoto

Sakai

. Extensional flow mixer for polymer nanocomposites. Polym Eng Sci 2006; 46: 1040–1050.

Rauwendaal

Osswald

Gramann

. Design of dispersive mixing devices. Int Polym Proc 1999; 14: 28–34.

Utracki LA, Luchiani A and Bourry D. Extensional flow mixer. Patent 6550956, USA, 2003.

Luo

Zhou

Zhang

. Effects of vibration force field on structure and properties of HDPE/CaCO₃ nanocomposites. Polym Test 2006; 25: 124–129.

Xuemei

Jinping

Xianwu

. Structure and properties of vibrating extruded high-density polyethylene sheet. Polym Bull 2006; 56: 607–618.

10.

Zhao

Guo

. Ultrasonic preparation of polymer/layered silicate nanocomposites during extrusion. Polymer Bull 2005; 55: 217–223.

11.

Isayev

Kumar

Lewis

. Ultrasound assisted twin screw extrusion of polymer–nanocomposites containing carbon nanotubes. Polymer 2009; 50: 250–260.

12.

Kotzev GK, Djoumaliisky SL, Popov MN, et al. Apparatus for continuously mixing polymer melts and fillers. Bulgarian Patent, Appl. No 110658, 2010 (in Bulgarian).

13.

Bagheri

Naimian

. Effect of photo-initiators on melt degradation of polypropylene and starch-filled polymer. Polym Int 2002; 51: 907–911.

14.

Canevarolo

. Chain scission distribution function for polypropylene degradation during multiple extrusions. Polym Degrad Stab 2000; 70: 71–76.

15.

Caseras

Canevarolo

. Correlation between melt flow index and chain scission distribution function during the thermo-mechanical degradation of polypropylene. Polimeros:Cienca e Tecnologia 2006; 16: 294–298 (in Portugal).

16.

Ibar JP. Method and apparatus to control viscosity of molten plastics prior to a molding operation. Patent 6210030, USA, 2001.

17.

Ibar

. Control of polymer properties by melt vibration technology: A review. Polym Eng Sci 1998; 38: 1–20.

18.

Krause

Pötschke

Häußler

. Influence of small scale melt mixing conditions on electrical resistivity of carbon nanotube-polyamide composites. Compos Sci Technol 2009; 69: 1505–1515.

19.

Pukanskzky

. Particulate filled polypropylene composites. In: Karger-Kocsis

(ed.) Polypropylene: An A-Z reference, Dordrecht: Kluwer Publishers, 1999; 574–580.

20.

Zhu

Chen

. Crystallization behavior and mechanical properties of polypropylene/modified carbon black composites. Polym Compos 2009; 30: 391–398.

21.

Chodak

Omastova

Pionteck

. Relation between electrical and mechanical properties of conducting polymer composites. J Appl Polym Sci 2001; 82: 1903–1906.

22.

Menard

. Dynamic mechanical analysis: A practical introduction, 2nd ed. Boca Raton: CRC Press, 2007.

23.

Liu

. PP/clay nanocomposites prepared by grafting-melt intercalation. Polymer 2001; 42: 10013–10019.

24.

Zhang

. Impact behaviour of polypropylene filled with multi-walled carbon nanotubes. Eur Polym J 2007; 43: 3197–3207.

25.

Dubnikova

Kuvardina

Krasheninnikov

. The effect of multiwalled carbon nanotube dimensions on the morphology, mechanical, and electrical properties of melt mixed polypropylene-based composites. J Appl Polym Sci 2010; 117: 259–272.

26.

Lopez Manchado

Valentini

Biagiotti

. Thermal and mechanical properties of single-walled carbon nanotubes: polypropylene composites prepared by melt processing. Carbon 2005; 43: 1499–1505.

27.

Mičušık

Omastová

Pionteck

. Influence of surface treatment of multiwall carbon nanotubes on the properties of polypropylene/carbon nanotubes nanocomposites. Polym Adv Technol 2011; 22: 38–47.

28.

Baniasadi

Ahmad Ramazani

Javan Nikkhah

. Investigation of in situ prepared polypropylene/clay nanocomposites properties and comparing to melt blending method. MaterDes 2010; 31: 76–84.

29.

Zhang

Y-Q

Lee

J-H

Jang

H-J

. Preparing PP/clay nanocomposites using a swelling agent. Compos Part B: Eng 2004; 35: 133–138.

30.

Zhang

Y-Q

Lee

J-H

Rhee

. Polypropylene-clay nanocomposites prepared by in situ grafting-intercalating in melt. Compos Sci Technol 2004; 64: 1383–1389.