Giant Milkweed (Calotropis persica) Fibers — A Potential Reinforcement Agent for Thermoplastics Composites

Abstract

In this study, the suitability of using Iranian grown giant milkweed fibers (GFs) as a new raw material for thermoplastic composites was investigated. The thermoplastic polymer, polypropylene (PP) was used as the matrix polymer and the maleated polypropylene, Epolene G3003^TM, was used as coupling agent. In the sample preparation, four levels of fiber loading (10, 20, 30, and 40 wt%) and three levels of coupling agent content (0, 1.5, and 3 wt%) were applied to discuss the mechanical properties of composites. GF/PP composites were prepared by a melt compounding process in a twin-screw extruder followed by injection moulding. Generally, with the addition of coupling agent tensile and flexural properties improved considerably compared with pure matrix and control specimens (without coupling agent). As expected, notched Izod impact strength significantly decreased as the mixing ratio of fiber increased. The results of the present study reveal that composites with good strength properties could be successfully developed using GF as the reinforcing agent.

Keywords

composites mechanical properties thermoplastic polypropylene reinforcement.

Get full access to this article

View all access options for this article.

References

Joseph, S. , Sreekala, M.S. , Oommen, Z. , Koshy, P. and Thomas, S. ( 2002). A Comparison of the Mechanical Properties of Phenol Formaldehyde Composites Reinforced with Banana Fibres and Glass Fibres, Composites Science and Technology, 62(14): 1857-1868.

Ashori, A. Bioresource Technology (in press). 99(11): 4661-4667.

Parrotta, J.A. ( 2001). Healing Plants of Peninsular India, pp. 944-952, CAB International, Wallingford, UK and New York.

Rahman, M.A. and Wilcock, C.C. (1991). A taxonomic revision of Calotropis (Asclepiadaceae), Nordic Journal of Botany, 11(3): 301-308.

Liogier, H.A. ( 1995). Descriptive Flora of Puerto Rico and Adjacent Islands , Vol. 4, pp. 617-623, Editorial de la Universidad de Puerto Rico, San Juan, PR.

Ashori, A. , Jalaluddin, H. , Raverty, W.D. and Mohd Nor, M.Y. ( 2006). Chemical and Morphological Characteristics of Malaysia Cultivated Kenaf (Hibiscus cannabinus) Fiber, Polymer-Plastic Technology and Engineering Journal, 45(1): 131-134.

Kareem, S.O. , Akpan, I. and Osho. M.B. (2003). Calotropis procera (Sodom apple) - A Potential Material for Enzyme Purification, Bioresource Technology, 87(1): 133-135.

American Society for Testing and Materials ( 1999). Annual Book of ASTM Standards, 100 Barr Harbor Dr., West Conshohocken, PA 19428.

American Society for Testing and Materials ( 1997). Annual Book of ASTM Standards, 100 Barr Harbor Dr., West Conshohocken, PA 19428.

10.

Nachtigall, S.M.B. , Cerveira, G.S. and Rosa, S.M.L. (2007). New Polymeric-coupling Agent for Polypropylene/wood-flour Composites, Polymer Testing , 26(5): 619-628.

11.

Yang, H.S. , Kim, H.J. , Park, H.S. , Lee, B.J. and Hwang, T.S. ( 2006). Water Absorption Behavior and Mechanical Properties of Lignocellulosic Filler-polyolefin Bio-Composites, Composite Structure, 72(4): 429-437.

12.

Karmaker, C. , Hoffmann, A. and Hinrichsen, G. (1994). Influence of Water Uptake on the Mechanical Properties of Jute Fiber Reinforced, The Influence of Moisture Content on the Impact Polypropylene, Journal of Applied Polymer Science, 54: 1803-1809.

13.

Doh, G.H. , Lee, S.Y. , Kang, I.A. and Kong, Y.T. (2005). Thermal Behavior of Liquefied Wood Polymer Composites (LWPC), Composite Structure , 68(1): 103-108.