Sage Journals: Discover world-class research

Abstract

Vibration force field was introduced into plastics processing in tri-screw dynamic mixing extruders, so as to intensify mixability and dispersion. The effects of vibration force field on toughened PP by mEPDM during plastics processing in tri-screw dynamic mixing extruders were investigated experimentally and synergism on polymer blends under vibration force field was discussed by using PP/mEPDM blends as a sample. The results showed a synergism effect on mechanical properties of PP/mEPDM blends under dynamic conditions and it was found that the vibration force field enhanced impact strength of PP/mEPDM blends, the amplitude of enhancement varied as mEPDM content varied, and the impact strength of PP/mEPDM blends basically presented a rising tendency followed by a fall with the increase of frequency and amplitude. The impact strength had a maximum value of 54.4 kJ/m² which was much larger than that under steady conditions as amplitude and frequency were 0.6 mm and 20 Hz, respectively, and the mEPDM content was 25%. Therefore, good synergism would be caused and the mechanical properties of PP/mEPDM blends would be modified due to the vibration force field.

Keywords

tri-screw dynamic mixing extruders vibration mEPDM PP synergism.

Get full access to this article

View all access options for this article.

References

Nicolis, G. and Prigogin, I. (1997). Self-organization in Non-equilibrium Systems from Dissipative Structure to Through Fluctuations, Wiley, New York.

Glendinning, P. (1994). Stability, Instability and Chaos: An Introduction to the Theory of Non-Linear Differential Equations, Cambridge .

Heikens, D. and Barentsen, W. (1977). Particle Dimensions in Polystyrene/Polyethylene Blends as a Function of their Melt Viscosity and of the Concentration of Added Graft Copolymer, Polymer, 18: 69-72.

Haken, H. (1989). Advanced Synergetics, Springer Verlag, Berlin.

Haken, H. (1997). Visions of Synergetics, J. Franklin Inst., 334B(5/6): 759-792.

Taylor, G.I. (1932). The Viscosity of a Fluid Containing Small Drops of Another Fluid, Proc. Roy. Soc. (A), 138: 41-48.

Qu, J. P. (2005). CN Patent: 200510032625.7, 2005-01-13.

Zhang, J. (2003). Research on the Constitutive Equation of Polymer Melts under Vibration Force Fields, South China University of Technology, Guangzhou.

Qu, J.P. (2005). Dynamic Plasticating Theory and Technology for Polymer Processing, Science Press, Beijing.

10.

Xu, B.P. (2003). Study on Mixing Process and Mechanism in an Intermeshing Counter-Rotating Twin-screw Extruder under Vibration Force Fields, South China University of Technology, Guangzhou.

11.

Ottino, J.M. (1990). The Kinematics of Mixing: Stretching, Chaos and Transport [M], pp. 13-16, Cambridge University Press, Cambridge.

12.

Kim, S.J. and Kwon, T.H. (1996). Enhancement of Mixing Performance of Single-screw Extrusion Processes Via Chaotic Flows. Part I: Concepts and Experimental Study, Adv. Polym. Technol., 15(1): 41-54.

13.

Lodygowski, T. and Perzyna, P. (1997). Numerical Modeling of Localized Fracture of Inelastic Solids in Dynamic Loading Processes, International Journal for Numerical Methods in Engineering, 40(22): 4137-4158.

Synergetic Effect on PP/mEPDM Blends Under Vibration Force Field in Tri-Screw Dynamic Mixing Extruder

Abstract

Keywords

Get full access to this article

References