This paper concentrates on the effect of compatibilizers on the thermal, dynamic mechanical, crystalline and rheological properties of unmodified fluorinated and oxy-fluorinated short Kevlar fiber reinforced ethylene propylene copolymer (EP). The compatibilizers used in this study are maleic anhydride grafted Polypropylene (MA-gPP). The composites were prepared in a brabender mixer and were molded in a compression molding. The compatibilized samples show improved thermal, dynamic mechanical crystalline as well as rheological properties as a result of better adhesion between the fiber and matrix at the interface. The compatibilizing effect is much more pronounced in the case of oxy-fluorinated Kevlar/EP composites in comparison with the untreated and fluorinated Kevlar/EP composites.
Macknight, W.J. , Lenz, R.W., Musto , P.V. and Somani, R. (1985). Binary Alloys of Nylon 6 and Ethylene-methacrylic Acid Copolymers: Morphological, Thermal and Mechanical Analysis, J. Polym. Engng. Sci., 25(18): 1124—1134.
2.
Wu, S. (1987). Formation of Dispersed Phase in Incompatible Polymer Blends: Interfacial and Rheological Effects, Polym. Engng. Sci., 27(5): 335—343.
3.
Han, C.D. (1981). Multiphase Flow in Polymer Processing, Academic Press, New York.
4.
Cyras, V.P., Iannace, S., Kenny, J.M. and Vazquez, A. (2001). Relationship Between Processing and Properties of Biodegradable Composites Based on PCL/Starch Matrix and Sisal Fibers, Polym . Compos., 22(1): 104—110.
5.
Datta, S. and Lohse, D.J. (1996). In: B.1. Hanser, Polymeric Compatibilizers, pp. 101—102.
6.
Nishio, T., Yokoi, T., Nomura, T., Ueno, K., Akagawa, T., Sakai, I., et al. (1991). U.S. Pat. 4,988,764, Toyota Jidosha.
7.
Mashita, K., Fujii, T. and Oomae, T. (1988). U.S. Pat. 4,780,505, Sumitomo Chemical.
8.
Ide, F. and Hasegawa, A. (1974). Studies on Polymer Blend of Nylon 6 and Polypropylene or Nylon 6 and Polystyrene using the Reaction of Polymer, J. Appl. Polym. Sci., 18(4): 963—974.
9.
Sakuma, M., Kitano, M., Sakaizawa, M., Yagi, Y., Yamamoto, N. and Yookokura, T. (1987). EP 0235876 A3, 7 January.
10.
Grof, I., Durcova, O. and Jambrich, M. (1992). Colloid. Polym. Sci., 22: 270—278.
11.
Rosch, J., Mulhaupt, R. and Michler, G.H. (1996). Macromol. Symp., 112: 141—150.
12.
Ikkala, O.T. , Holsti-Miettinen , M.R. and Seppala, J. (1993). Effects of Compatibilization on Fractionated Crystallization of PA6/PP Blends , J. Appl. Polym. Sci., 49(7): 1165—1174.
13.
Holsti-Miettinen, R., Seppala, J. and Ikkala, O.T. (1992). Effects of Compatibilizers on the Properties of Polyamide/Polypropylene Blends, Polym. Eng. Sci., 32(13): 868—877.
14.
Rosch, J. and Mulhaupt, R. (1994). Prepr. ADSC Div. Polym. Mater: Sci. Technol., 70: 193.
15.
Gonzales-Montiel, A., Keskkula, H. and Paul, D.R. (1994). Prepr. ADSC Div. Polym . Mater.: Sci. Technol., 70: 194.
16.
Folkes, M.J. and Hopes, P.S. (1993). In: Blackie, Polymer Blends and Alloys, Vol. 3, pp. 60—61, Academic & Professional.
17.
Kim, M.S. and Kim, B.K. (2004). Reactive Melt Blends of Thermoplastic Polyolefins, MAH-g-PP and Nylon 6, Polym. Adv. Technol., 15(7): 419—424.
18.
Zhang, W.Q.F. , Endo, T. and Hirotsu, T. (2005). Effect of Maleated Polypropylene on the Performance of Polypropylene/Cellulose Composite, Polymer Composites, 26(4): 448—453.
19.
Sacchi, A., Landro, Di L., Pegoraro, M. and Severini, F. (2004). Morphology of Isotactic Polypropylene—Polyamide 66 Blends and their Mechanical Properties, European Polymer Journal, 40(8): 1705—1713.
20.
Mukherjee, M., Das, C.K. and Kharitonov , A.P. (2006). Fluorinated and Oxy-fluorinated Short Kevlar Fiber-Reinforced Ethylene Propylene Polymer, Polymer Composites, 27(2): 205—212.
21.
Mukherjee, M. , Das, C.K. and Kharitonov , A.P. (2006). Influence of Fluorinated and Oxy-fluorinated Short Kevlar Fiber Loading on the Properties of Ethylene Propylene Matrix Composites, Mater. Manuf. Processes, 21(8): 892—898.
22.
Shivakumar, E. and Das, C.K. (2005). Self-Reinforcing Composites of Polyacrylic Elastomers and Liquid Crystalline Polymer: Mechanical , Thermal, and Dynamic Mechanical Properties, Polym. and Polym. Compos., 13(7): 687—695.
23.
Florin, R.E. (1979). Electron Spin Resonance Spectra of Polymers During Fluorination, J. Fluorine Chem. , 14(3): 253—262.
24.
Kharitonov, A.P. and Moskvin, Yu. L. (1994). Kinetics and Mechanisms of the Direct Fluorination of Polymers, In: The Second International Conference ``Fluorine in Coatings'', Salford, England, September 28—30, paper 13.
25.
Kalaprasad, G. , Mathew, G., Pavitran , C. and Thomas, S. (2003). Melt Rheological Behavior of Intimately Mixed Short Sisal-Glass Hybrid Fiber-reinforced Low-density Polyethylene Composites. I. Untreated Fibers, J. Appl. Polym. Sci., 89(2): 432—442.
