Effects of Some Injection Molding Process Parameters on Fiber Orientation Tensor of Short Glass Fiber Polystyrene Composites (SGF/PS)

Abstract

Calculation of fiber orientation distribution is the reference standard for determining the numerous physical and mechanical properties of injection molded short fiber reinforced thermoplastics. On the other hand, most of the properties of these composites depend on their fiber orientation pattern, which can be represented by tensorial notation, a_ij. This work focuses on numerical calculation of a fiber orientation tensor of an injection molded short glass fiber polystyrene (SGF-PS) composite part, shaped as a rectangular plate. In this study, the effects of some parameters of the injection molding process including injection flow rate, mold wall temprature, packing pressure and also fiber content on the changes of fiber orientations of this specimen are investigated. Our studies are concentrated on determining the changes of the first orientation tensor component in the flow direction due to different injection parameters. In addition, the changes on tensile modulus of the injected part are simulated in every condition. The simulations show how these molding parameters can influence both fiber orientation and tensile modulus of injection molded parts. At the first step, in order to be confident about the software results, they are validated by experimental data in two cases.

Keywords

fiber orientation tensor short glass fiber composite tensile modulus injection molding parameter.

Get full access to this article

View all access options for this article.

References

Advani, S.G. and Sozer, E.M. (2003). Process Modeling in Composites Manufacturing, Marcel D, New York.

Advani, S.G. (1994). Flow and Rheology in Polymer Composites Manufacturing , Elsevier, Amsterdam- New York.

Karger-Kocsis, J. (1995). Polypropylene Structure, Blends, and Composites , 1st edn, Vol. 3, pp. 113—141, Chapman and Hall, London.

Mascia, L. (1974). The Role of Additives in Plastics, 1st edn, Chap. 3, pp. 44—104, Arnold.

Advani, S.G. and Tucker, III, C.L. (1984). The use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composite, J. Rheology, 31: 751—784.

Whiteside, B.R. and Coates, P.D. (2005). Measurement and FE Prediction of Glass Fiber Orientation Distributions for Injection Moulded Products of Increasing Complexity. (19 pages) Downloaded from http://www.bradford.ac.uk/acad/comppro/images/glass.pdf (16.08.2005)

Charels, L. and Tucker, III, C.L. (1991). Flow Regimes for Fiber Suspension in Narrow Gaps, Journal of Non-Newtonian Fluid Mechanics, 39(3): 239—268.

Laun, H.M. (1984). Orientation Effects and Rheology of Short Glass Fiber-reinforced Thermoplastics, Journal of Celloid & Polymer Science, 262(4): 257—269.

Vincent, M. , Giroud, T. , Clarke, A. and Eberhardt, C. (2005). Description and Modeling of Fiber Orientation in Injection Molding of Fiber Reinforced Thermoplastics, Journal of Applied Polymer Science, 46: 6719—6725.

10.

Neves, N.M. , Pontes, A.J. and Pouzada, A.S. (2002). Fiber Contents Effect on the Fiber Orientation in Injection Molded GF/PP Composite Plates, Society of Plastic Engineering (SPE) ANTEC Conference 1989— 2002, May 2002, Portugal.

11.

Laranjeira, E. , de Carvalho, L.H. , de L. Silva , S.M. and d'Almeida, J.R. (2006). Influence of Fiber Orientation on the Mechanical Properties of Polyester/Jute Composites, Journal of Reinforced Plastics and Composites , 25: 1269—1278.

12.

Thomason, J.L. (2007). The Influence of Fiber Length and Concentration on the Properties of Glass Fiber Reinforced Polypropylene: 7. Interface Strength and Fiber Strain in Injection Moulded Long Fiber PP at High Fiber Content. Journal of Composites Part A: Applied Science and Technology, 38(1): 210—216.

13.

Mlekusch, B. , Lehner, E.A. and Geymayer, W. (1999). Fiber Orientation in Short-fiber-reinforced Thermoplastics I. Contrast Enhancement for Image Analysis, Journal of Composites Science and Technology, 59: 543—545.

14.

Han, K.H. and Im, Y.T. (2002). Numerical Simulation of Three Dimentional Fiber Orientation in Short Fiber Reinforced Injection Molded Parts, Journal of Material Processing Technology, 124: 366—371.

15.

Lee, S.W. , Youn, J.R. , Witold, B. , Anne D'Souza, N. , Menesses, C. , Manuel, V. and Michael, H. (1999). Characterization of Short Glass Fiber Filled Polystyrene by Fiber Orientation and Mechanical Properties , 7th International Conference on Polymer Characterization, 1999—1993, Vol. 148, pp. 211—227, Denton, TX.

16.

Jao Jules, E. , Tsujikami, T. , Lomov, S.V. and Verpoest, I. (2004). Effect of Fibers Length and Fibers Orientation on the Predicted Elastic Properties of Long Fiber Composites . (10 pages) Downloaded from http://www.mtm.kuleuven.ac.be/Research/C2/poly/index.htm (17.08.2005).

17.

Kim, E.G. , Park, J.K. and Jo, S.H. (2001). A Study on Fiber Orientation During the Injection Molding of Fiber-reinforced Polymeric Composites Comparison between Image Processing Results and Numerical Simulation, Journal of Material Processing Technology, 111: 225—232.

18.

Fu, S.-Y. , Lauke, B. , Mader, E. , Yue, C.-Y. and Hu, X. (2000). Tensile Properties of Short Glass Fiber and Short Carbon Fiber Reinforced Polypropylene Composites, Part A, Jourrnal of Applied Science and Manufacturing, 31: 1117—1125.

19.

Fung Chin-Ping , Hwang Jiun-Ren and Hsu Chun-Chia (2003). The Effect of Injection Molding Process Parameters on the Tensile Properties of Short Glass Fiber-reinforced PBT, Polymer-Plastics Technology and Engineering, 42(1): 45—63.

20.

Shaharuddin, S.I.S. , Salit, M.S. and Zainudin, E.S. (2006). A Review of the Effect of Molding Parameters on the Performance of Polymeric Composite Injection Molding, Turkish J. Eng. Env. Sci., 30: 23—34.

21.

Brandrup, J. , Immergut, E.H. and Grulke, E.A. (2003). Polymer Handbook, 4th edn, 2 Vol set, John Wiley & Sons, New York.

22.

Moldflow Plastics Insight Users Manual, White Paper MPI® Corporation, http://www.moldflow.com

23.

Oldenbo, M. , Mattsson, D. , Varna, J. and Berglund, L.A. (2004). Global Stiffness of a SMC Panel Considering Process Induced Fiber Orientation, Journal of Reinforced Plastics and Composites, 23(1): 37—49.