Reinforced Thermoplastic Natural Rubber Hybrid Composites with Hibiscus cannabinus,L and Short Glass Fiber — Part I: Processing Parameters and Tensile Properties

Abstract

Hybrid composite of thermoplastic natural rubber (TPNR) reinforced with Hibiscus cannabinus, L fiber (kenaf fiber: KF) and short glass fiber (GF) were prepared via melt blending method using internal mixer, at various temperatures, speed and time. TPNR matrix is a blend of polypropylene (PP), liquid natural rubber (LNR) and natural rubber (NR) at a ratio of 70 : 10 : 20. Processing parameters were determined from the tensile strength based on fiber content with 50: 50 ratios of GF and KF. Using the optimum processing parameters, tensile test was carried out for reinforced TPNR—KF—GF hybrid composites (0—20% by volume), with and without addition of silane coupling agent and maleic anhydride grafted polypropylene (MAPP). The result of tensile strength has shown that the increasing in kenaf fiber content substantially reduced the tensile strength and modulus. Scanning electron microscopy (SEM) has shown that the composite, with coupling agent or compatibilizer, promotes better fiber—matrix interaction.

Keywords

hybrid composite short glass fiber kenaf fiber tensile properties.

Get full access to this article

View all access options for this article.

References

Mishra, S. , Mohanty, A.K. , Drzal, L.T. , Misra, M. , Parija, S. , Nayak, S.K. and Tripathy, S.S. (2003). Studies on Mechanical Performance of Biofiber/Glass Reinforced Polyester Hybrid Composites, Compos. Sci. & Technol., 63: 1377-1385.

Rozman, H.D. , Tay, G.S. , Kumar, R.N. , Abusamah, A. , Ismail, H. and Mohd. Ishak, Z.A. (2001). Polypropylene - Oil Pal Empty Fruit Bunch - Glass Fiber Hybrid Composites: A Preliminary Study on the Flexural and Tensile Properties, Eur. Polym. J., 37: 1283-1291.

Sreekala, M.S. , Jayamol, G. , Kumaran, M.G. and Sabu Thomas. (2002). The Mechanical Performance of Hybrid Phenol-formaldehyde-based Composites Reinforced with Glass and Oil Palm Fibers, Compos. Sci. & Technol., 62: 339-353.

Bunsell, A.R. and Harris, B. (1974). Hybrid Carbon and Glass Fiber Composites, Compos., 5: 157-164.

Harris, B. (1986). Engineering Composite Materials, Institue of Metals, London.

Rowell, R.M. , Sanadi, A. , Jacobson, R. and Caulfield, D. (1999). Kenaf Properties, In: Processing and Products, Missisippi State University, Ag & Bio Engineering, pp. 381-392.

Takashi, N. , Koichi, I. , Masaru, K. , Katsuhiko, N. and Hiroshi, I. (2003). Kenaf Reinforced Biodegradable Composite, Compos . Sci. & Technol., 63: 1281-1286.

Abdullah, I. and Zakaria, Z. (1989). Pendepolimeran Fotokimia Getah Asli, Sains Malaysiana, 18(2): 99-109.

Tinker, A.J. (1987). Thermoplastic Natural Rubber Blends; Development and Commercial Prospects, In: Proc. UNIDO Workshop: Industrial Composites Based on Natural Rubber, pp. 58-67.

10.

Tinker, A.J. (1984). Preparation of Polypropylene/Natural Rubber Blends Having High Impact Strength at Low Temperatures, Polym. Communications, 25: 325-326.

11.

Kutty, S.K.N. and Nando, G.B. (1991). Short Kevlar Fiber-thermoplastic Polyurethane Composite, J. Appl. Polym. Sci., 43: 1913-1923.

12.

Sameni, J.K. , Ahmad, S.H. and Zakaria, Z. (2002). Effect of Processing Parameters and Graft-copoly (Propolyne/Maleic anhydride) on Mechanical Properties of Thermoplastic Natural Rubber Composites Reinforced with Wood Fibers, Plast . Rubber and Compos., 31(4): 162-166.

13.

Ismail, H. (2004). Filled and Reinforced Polymer Composite with Short Natural Fiber, Universiti Sains Malaysia, Pulau Pinang.

14.

Sahrim, H.A. and Mohamed, N.H. (1999). The Effect of Temperature and Strain Rate on the Tensile Properties of Reinforced Thermoplastic Natural Rubber (HDPE/PE) with Short Carbon Fiber, Pertanika Jurnal Sains & Teknologi., 8(2): 117-124.

15.

Jacob, M. , Thomas, S. and Varughese, K.T. (2004). Mechanical Properties of Sisal/oil Palm Hybrid Fiber Reinforced Natural Rubber Composites, Compos. Sci. and Technol., 64: 955-965.

16.

Anuar, H. , Ahmad, S.H. , Rasid, R. and Zakaria, S. (2005). Tensile Behavior and Morphological Studies of TPNR-KF-CF Hybrid Composites, Am. J. Appl. Sci., (Special Issue): 34-39.

17.

Folkes, M.J. (1982). Short Fiber Reinforced Thermoplastics, John Wiley & Sons, London.

18.

Wambua, P. , Ivens, J. and Verpoest, I. (2003). Natural Fibers: Can They Replace Glass in fiber Reinforced Plastics? Compos. Sci. and Tech., 63: 1259-1264.

19.

Rozman, H.D. , Saad, M.J. and Mohd Ishak , Z.A. (2003). Flexural and Impact Properties of Oil Palm Empty Fruit Bunch (EFB)-Polypropylene Composites - The Effect of Maleic Anhydride Chemical Modification of EFB, Polymer Testing, 22: 335-341.

20.

Thwe, M.M. and Liao, K. (2002). Effects of Environmental Aging on the Mechanical Properties of Bamboo-glass Fiber Reinforced Polymer Matrix Hybrid Composites , Composites (A), 33: 43-52.

21.

Luo, S. and Netravali, A. (1999). Mechanical and Thermal Properties of Environment-friendly ``Green'' Composites Made from Pineapple Leaf Fibers and Poly(hydroxybutyrate-co-valerate) Resin, Polym. Compos., 20(3): 367-378.

22.

Gauthier, R. , Joly, C. , Compas, A. , Gaultier, H. and Escoubes, M. (1998). Interfaces in Polyolefin/Cellulosic Fiber Composites: Chemical Coupling, Morphology, Correlation with Adhesion and Ageing in Moisture, Polym. Compos., 19(3): 287-300.

23.

24.

Sameni, J.K. , Ahmad, S.H. and Zakaria, S. (2003). Mechanical Properties of Kenaf - Thermoplastic Natural Rubber Composites, Poly. - Plast. Tech. & Eng. , 42(3): 345-355.

25.

Arbelaiz, A. , Fernandez, G. , Ramos, J.A. , Retegi, A. , Llano-Ponte and Mondragon, I. (2005). Mechanical Properties of Short Flax Fiber Bundle/Polypropylene Composites: Influence of Matrix/Fiber Modification, Fiber Content, Water Uptake and Recycling , Compos. Sci and Technol., 65: 1582-1592.