In this study, a simple technique for revealing the key parameters (permeability, frontend kinetics) of the RTM process is developed. The variations in permeability during the technique lift the capillary effect, which is modeled for two configurations. The analysis of the front-end kinetics helps to identify the permeability tensor. The examination of the capillary number gives evidence of a non-saturated zone, characterized by a critical length.
Bruschke, M. V. and Advani, S. G. (1990). A Finite Element/Control Volume Approach to Mold Filling in Anisotropic Porous Media , Polymer Composites, 11(6): 398–405 .
2.
Li, S. and Gauvin, R. (1991). Journal of Reinforced Plastic and Composites, 10(3): 314–327 .
3.
Saouab, A. , Breard, J. and Bouquet, G. (1999). Numerical Modeling of the Injection of a Resin Through Reinforcement of Composite with Matrix Polymeric , In 4th Congress of Mechanics, Faculty of Mohammadia, Morocco.
4.
Liu, X. L. (December 2000). Isothermal Flow Simulation of Liquid Composite Molding , Composites Part A: Applied Science and Manufacturing, 31(12): 1295–1302 .
5.
Shojaei, A. , Ghaffarian, S. R. and Karimian, S. M. H. (2002). Numerical Simulation of Three-dimensional Mold Filling Process in Resin Transfer Molding using Quasi-steady State and Partial Saturation Formulations , Composites Science and Technology, 62(6): 861–879 .
6.
Hattabi, M., Snake, I., Echaabi, J. and Besal, H. M. O. (December 2004). Simulation of the Face of Flow in the Processes of Moulding of the Liquid Composites, Comptes Rendues de Mécanique, to appear.
7.
Adams, K. L. , Miller, B. and Rebenfeld, L. (1986). Polymer Engineering and Science, 26(20): 1434–1441 .
8.
Gauvin, R. , Trochu, F. , Lemenn, Y. and Diallo, L. (1996). Permeability Measurement and Flow Simulation through Fiber Reinforcement , Polymer Composites, 17(1): 34–42 .
9.
Breard, J. , Saoub, A. and Bouquet, G. (1998). Measure Space Permeability of a Three-dimensional Reinforcement for Composite Materials to Matrix Polymeric , The European Physical Journal Applied Physics, 1(2): 269–278 .
10.
Gouley, G. (1995). Study of the Flows in the Processes of Resin Injection on Reinforcement, PhD Thesis, University of Sciences and Technologies of Lille Flandres Artois, France.
11.
Ahn, K. J. , Seferis, J. C. and Berg, J. C. (1991). Simultaneous Measurement of Permeability and Capillary Pressure of Thermosetting , Polymer Composites, 12(3): 146–152 .
12.
Lundstrom, T. S. (1996). Bubble Transport through Constricted Capillary Tubes with Application to Resin Transfer Molding , Polym. Compos., 7(6): 770–779 .
13.
Lundstrom, T. S. , Stenberg, R. , Bergstrom, R. , Partanen, H. and Birkeland, P. A. (January 2000). In-plane Permeability Measurements: A Nordic Round-robin Study , Composites Part A: Applied Science and Manufacturing, 31(1): 29–43 .
14.
Luo, Y. , Verpoest, I. , Hoes, K. , Vanheule, M. , Sol, H. and Cardon, A. (2001). Permeability Measurement of Textile Reinforcements with Several Test Fluids , Composites Part A: Applied Science and Manufacturing, 32(10): 1497–1504 .
15.
Lee, G. W. , Lee, N. J. , Jang, J. , Lee, K. J. and Nam, J. D. (2002). Effects of Surface Modification on the Resin-transfer Moulding (RTM) of Glass-fibre/Unsaturated-polyester Composites , Composites Science and Technology, 62(1): 9–16 .
16.
Dimitrovova, Zuzana and Advani, Suresh G. (2002). Analysis and Characterization of Relative Permeability and Capillary Pressure for Free Surface Flow of a Viscous Fluid across an Array of Aligned Cylindrical Fibers , Journal of Colloid and Interface Science, 245(2): 325–337 .
17.
Dimitrovova, Zuzana and Advani, Suresh G. (2004). Mesolevel Analysis of the Transition Region Formation and Evolution during the Liquid Composite Molding Process , Computers and Structures, 82(17–19): 1333–1347 .
18.
Pillai, K. L. and Advani, S. G. (February 1998). Numerical Simulation of Unsaturated Flow in Woven Fiber Preforms during the Resin Transfer Molding Process , Polymer Composites, 19(1): 71–80 .
19.
Wong, P. Z. (1994). Flow in Porous Media: Permeability and Deplacement Patterns, MRS Bull., 32–38.
20.
Weitzenbock, J. R. , Shenoi, R. A. and Wilson, P. A. (1998). Measurement of Threedimensional Permeability , Composites-Part A: Applied Science and Manufacturing, 29A(1–2): 159–169 .
21.
Foley, M. F. and Gutowski, T. (1991). 23rd International SAMPE Technical Conference, 23: 326–340 .
22.
Dave, R. (1991). A Unified Approach to Modeling Resin Flow During Composite Processing , Journal of Composite Materials, 24: 22–41 .
23.
Patel, N. and James Lee, L. (1995). Effects of Fiber Mat Architecture on Void Formation and Removal in Liquid Composite Molding , Polymer Composites, 16(5): 386–399 .
24.
Kim, Byoung Yoon and Nam, Gi Joon , Ryu, Ho Sok and Lee, Jae Wook (March 2000). Optimization of Filling Process in RTM using Genetic Algorithm , Korea-Australia Rheology Journal, 12(1): 83–92 .
25.
Ferland, P. , Guittar, D. and Trochu, F. (February 1996). Concurrent for Permeability Measurement in Resin Transfer Molding , Polymer Composites, 17(1): 149–158 .
26.
Deparseval, Y. , Pillai, K. M. and Advani, S. G. (1997). A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media , Transport in Porous Media, 27(3): 243–264 .
