A neural-network-assisted method for flow-front estimation in resin transfer molding using pressure sensors

Abstract

The resin transfer molding (RTM) process shows considerable advantages in composite manufacturing. Nevertheless, the part quality manufactured by RTM is sensitive to material and process variations during the preform impregnation. To improve the process robustness and achieve better process control, a methodology for resin flow monitoring based on a combination of a sensing system and a neural network model is proposed, which can be easily implemented into a generic RTM process. Using pressure data provided by a limited number of sensors distributed over the mold surface, the proposed method allows the prediction of flow-front patterns at any impregnation time. The dataset for training is generated by physical-based simulations. Considering the permeability changes caused by uncertainty conditions, the permeability tensor is modeled with random variations. The network parameters are obtained by trial-and-error. Furthermore, the sensor distribution scheme and the dataset size are identified as the sensitive factors of the model. Finally, the predicted results are verified by numerical solutions. This method can be used to avoid the formation of voids and improve the final part quality.

Keywords

neural network resin transfer molding resin flow simulation permeability flow-front pressure sensors

Get full access to this article

View all access options for this article.

References

Lee

. A study on the mold filling process in resin transfer molding. Polym Eng Sci 1991; 31: 765–771.

Phelan

Jr. . Simulation of the injection process in resin transfer molding. Polym Compos 1997; 18: 460–476.

Di Fratta

Koutsoukis

Klunker

, et al. Fast method to monitor the flow front and control injection parameters in resin transfer molding using pressure sensors. J Compos Mater 2016; 50(21): 2941–2957.

Mesogitis

Skordos

Long

. Uncertainty in the manufacturing of fibrous thermosetting composites: a review. Compos - A: Appl Sci Manuf 2014; 57: 67–75.

Di Fratta

Klunker

Ermanni

. A methodology for flow-front estimation in LCM processes based on pressure sensors. Compos - A: Appl Sci Manuf 2013; 47: 1–11.

Long

Endruweit

. Prediction, measurement and significance of reinforcement permeability. Keynote lecture. In: 10th International conference on flow processes in composite materials (FPCM-10). Ascona, Switzerland, July 11–15, 2010.

Arbter

. Contribution to robust resin transfer molding. PhD thesis. Zurich, Switzerland: ETH Zurich, 2008.

Varna

Joffe

Berglund

, et al. Effect of voids on failure mechanisms in RTM laminates. Compos Sci Technol 1995; 53(2): 241–249.

Morren

Bossuyt

Sol

. 2D permeability tensor identification of fibrous reinforcements for RTM using an inverse method. Compos - A: Appl Sci Manuf 2008; 39: 1536–1550.

10.

Endruweit

Long

. Influence of stochastic variations in the fibre spacing on the permeability of bi-directional textile fabrics. Compos - A: Appl Sci Manuf 2008; 37(5): 679–694.

11.

Trochu

Gauvin

Gao

. Numerical analysis of the resin transfer molding process by the finite element method. Adv Polym Technol 1993; 12: 329–342.

12.

Zhang

Cosson

Comas-Cardona

, et al. Eifficient stochastic simulation approach for RTM process with random fibrous permeability. Compos Sci Technol 2011; 71(12): 1478–1485.

13.

Bickerton

Stadtfeld

Steiner

, et al. Design and application of actively controlled injection schemes for resin-transfer molding. Compos Sci Technol 2001; 61: 1625–1637.

14.

Lawrence

Hsiao

K-T

Don

, et al. An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding. Compos - A: Appl Sci Manuf 2002; 33: 981–990.

15.

Devillard

Hsiao

K-T

Gokce

, et al. On-line characterization of bulk permeability and race-tracking during the filling stage in resin transfer molding process. J Compos Mater 2003; 37: 1525–1541.

16.

Nielsen

Pitchumani

. Closed-loop flow control in resin transfer molding using real-time numerical process simulations. Compos Sci Technol 2002; 62(2): 283–298.

17.

Gupta

Sundaram

. Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology(VERITy) process. Compos - A: Appl Sci Manuf 2009; 40(8): 1065–1070.

18.

Lynch

Hubert

Poursartip

. Use of a simple, inexpensive pressure sensor to measure hydrostatic resin pressure during processing of composite laminates. Polym Compos 1999; 20(4): 581–593.

19.

Danisman

Tuncol

Kaynar

, et al. Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors. Compos Sci Technol 2007; 67(3–4): 367–379.

20.

Luthy

Landert

Ermanni

. 1D-permeability measurements based on ultrasound and linear direct current resistance monitoring techniques. J Mater Process Manuf Sci 2001; 10(1): 25–43.

21.

Yan

Zhu

Kuang

, et al. Aerodynamic shape optimization using a novel optimizer based on machine learning techniques. Aerosp Sci Technol 2019; 86: 826–835.

22.

Essien

Giannetti

. A deep learning model for smart manufacturing using convolutional LSTM neural network autoencoders. IEEE Trans Ind Inform 2020; 16(9): 6069–6078.

23.

Huang

Guo

Liu

, et al. A two-stage transfer learning-based deep learning approach for production progress prediction in IoT-enabled manufacturing. IEEE Internet Things J 2019; 6(6): 10627–10638.

24.

Koorevaar

. Simulation of liquid injection molding. In: 23rd Int SAMPE Europe Conference. Paris, France, April 9th–11th 2002.

25.

Dongare

Kharde

Kachare

. Introduction to artificial neural network. Int J Eng Innov 2012; 2(1): 189–194.

26.

Wang

. Artificial neural network. Interdisciplinary computing in java programming the springer international series in engineering and computer science, vol 743. Boston, MA: Springer, 2003.

27.

Kingma

. Adam: A Method for Stochastic Optimization. In: Proceedings of the 3rd international conference for learning representations (ICLR), 2015.

28.

Aksoy

Haralick

. Feature normalization and likelihood-based similarity measures for image retrieval. Pattern Recognit Lett 2001; 22(5): 563–582.

29.

Srivastava

Hinton

Krizhevsky

, et al. Dropout: a simple way to prevent neural networks from overfitting. J Mach Learn Res 2014; 15(56): 1929–1958.