The fracture toughness, defined as Kc, of injection molded long fiber reinforced polypropylene with 50% E-glass and its variations is investigated. Rectangular plaques of different thicknesses at various sets of processing conditions have been fabricated. In order to assess the spatial variation of the fracture toughness, specimens aligned in the direction of the injection molding flow and perpendicular to it, have been obtained and tested at pre-selected locations. The morphology of the samples consisting of flow induced through-thickness layers was also evaluated experimentally and related to the fracture toughness, thus showing the effect of the part morphology on such mechanical property.
Karger-KocsisJ., and FriedrichK. “Fracture Behavior of Injection-Molded Short and Long Glass Fiber- Polyamide 6.6 Composites,”Composites Science and Technology, Vol. 32 pp. 293–325(1988).
2.
GonzalezF., and ChassapisC. “Plain Strain Fracture Toughness Performance of Injection Molded Long Fiber Reinforced Thermoplastics: An Experimental Investigation,”Journal of Injection Molding Technology, Vol. 3, No. 3 pp. 133–140, Sept. (1999).
3.
Vu-Khanh and Denault, “Fracture Behavior of Long Fiber Reinforced Thermoplastics,”Journal of Materials Science, Vol. 29, pp. 5732–5738(1994).
4.
Karger-KocsisJ., HarmiaT., and CzigányT., “Comparison of the Fracture and Failure Behavior of Polypropylene Composites Reinforced by Long Glass Fibers and by Glass Mats,”Composite Science and Technology, Vol. 54 pp. 287–298(1993).
5.
PechulisM., and VautourD. “The effect of Thickness on the Tensile and Impact Properties of Reinforced Thermoplastics,”Journal of Reinforced Plastics and Composites, Vol. 17, No. 17(1998).
6.
SkourlisT., MehtaS., ChassapisC., and ManoochehriS., “Impact Fracture Behavior of Injection Molded Long Fiber Reinforced Polypropylene,”Polymer Engineering and Science, Vol. 10, No. l, pp. 79–89 (1998).
7.
HashemiS., and KoohgilaniM. “Fracture Toughness of Injection Molded Glass Fiber Reinforced Polypropylene,”Polymer Engineering and Science, Vol. 35, No. 13 pp. 1124–1132 (1995).
8.
HarrisD. “Stress Intensity Factors for Hollow Circumferentially Notched Round Bars”Journal of Basic Engineering, pp. 49–54, March (1967).
9.
DowlingE. N.“Mechanical Behavior of Materials,”Prentice Hall, Inc. (1993).
10.
“Tentative Method of Test for Plane Strain Fracture Toughness of Metallic Materials,”ASTM Designation: E399–70T.
