PET foams of variable densities (1 g/cc to 0.2 g/cc), based on virgin and recycled material were produced by extrusion with physical or chemical blowing agents and evaluated as low density core in sandwich panels having M/F impregnated paper or flame retardant mineral reinforced PET as skin faces. Flexural and shear stiffness of the laminates were determined by variable span three point bending. Panels were also tested for thermal and moisture stability and compared with competitive sandwich constructions based on PVC foam, flake board, particleboard and plywood. Potential applications of the PET based laminates in building and construction are presented.
1. M. Xanthos, Q. Zhang, S. K. Dey, Y. Li, U. Yilmazer and M. O’Shea, J. Cell. Plastics, 34, 6, 495 (1998).
2.
2. L. C. Muschiatti, U.S. patent 5,229,432 (1992).
3.
3. H. Al-Ghatta, S. Severini and L. Astarita, U.S. patent 5,422,381 (1995).
4.
4. M. Hayashi, N. Amano, T. Taki and T. Hirai, U.S. patent 5,000,991 (1991).
5.
5. M. Xanthos, U. Yilmazer, S. K. Dey, and J. Quintans, “Melt Viscoelasticity of Polyethylene Terephthalate Resins for Low Density Extrusion Foaming,”Polym. Eng. Sci., 40, 3, 554-566, 2000.
6.
6. J. Quintans, M. Xanthos and U. Yilmazer, “Rheological Characterization of Unmodified and Chemically Modified PET resins,”PPS North American Meeting, August 17-19, 1998, Toronto, Ont.
7.
7. M. Xanthos, S. K. Dey, Q. Zhang and J. Quintans, Proc. 57th SPE ANTEC, 45, 2109 (1999).
8.
8. M. Xanthos, S. K. Dey and Q. Zhang, 1998 TAPPI Polymers, Laminations and Coatings Conference, pp. 645-650, TAPPI Press, Atlanta1998.
9.
9. M. Xanthos, S. K. Dey and U. Yilmazer, Proc. Foams 99 SPE Conference, p. 55, Parsippany, NJ, October 1999.
10.
10. R. Nicholls, “Composite Construction Materials Handbook,” Chapter 12, Prentice-Hall, Inc.Englewood Cliffs, NJ, 1976.
11.
11. A. G. H. Dietz ed., “Composite Engineering Laminates,” Chapter 8, The MIT Press, Cambridge, MA, 1969.
