Simulation and experimental investigation of the surgical needle deflection model during the rotational and steady insertion process

Abstract

Needle insertion is executed in numerous medical and brachytherapy events. Exact needle insertion into inhomogeneous soft biological tissue is of useful importance due to its significance in clinical diagnosis (especially percutaneous) and treatments. The surgical needles used in such processes can deflect during the percutaneous process. Needle deflecting which affects needle — soft tissue interface and needle controllability have a crucial role in establishment precision. In this paper, we have analyzed a mechanics-based model both rotational and non-rotational needle insertion, and studied the deflection phenomenon in both insertion cases, we validated it with a real-time nonlinear Dassault Systèmes^® ABAQUS simulation model. For definite contact force, the maximum the contact stiffness was, the minimum it inserted, the cohesive surface model was used to investigate the needle insertion analysis, where the fracture point was defined by a failure strain and with the help of the in, the fully failed components would be removed. Using living tissue comparable PVA gel materials, the needle insertion force model is developed from insertion experimentations with the help of two different processes (rotational and non-rotational needle insertion). In a rotational needle, deflection is less than in a non-rotational needle. The preliminary insertion was observed in the rotational needle at 1.261 mm (experiment), and 1.538 mm (simulation), and for non-rotational needle insertion, the initial insertion was noticed at 1.756 mm (experiment) and 1.982 mm (simulation). The main aim of this study is to navigate the surgical needle in an accurate way to reduce the erroneousness for a clinical diagnosis like anesthesia, brachytherapy, biopsy, and modern microsurgery operation.