In this study, the authors present a micromechanical finite element modelling approach to the analysis of a set of ultrafine-grained polycrystalline copper structures. The models take into account both realistic grain distribution and the number of refinement passes of the microstructure. The grain size effect is successfully predicted, with non-uniform deformation and shear localization reproduced during global plastic flow in agreement with experimental observations. The models provide a useful tool with which to interpret damage and fracture mechanisms occurring in ultrafine-grained structures.
ValievRZLangdonTG. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci2006; 51(7): 881–981.
5.
WeiWChenGWangJ. Microstructure and tensile properties of ultrafine grained copper processed by equal-channel angular pressing. Rare Metals2006; 25(6): 697–703.
6.
MeyersMAMishraABensonDJ. Mechanical properties of nanocrystalline materials. Prog Mater Sci2006; 51: 427–556.
7.
LugoNLlorcaNCabreraJM. Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion. Mater Sci Eng A-Struct2008; 477(1–2): 366–371.
8.
HoeppelHWKautzMXuC. An overview: fatigue behaviour of ultrafine-grained metals and alloys. Int J Fatigue2006; 28(9): 1001–1010.
9.
LukasPKunzLSvobodaM. Fatigue mechanism in ultrafine-grained copper. Kovove Mater2009; 47(1): 1–9.
10.
VinogradovA. Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation. J Mater Sci2007; 42(5): 1797–1808.
11.
CavaliereP. Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals. Int J Fatigue2009; 31(10): 1476–1489.
12.
ColliniL. Fatigue crack growth in ECAPed commercially pure UFG copper. Proc Eng2010; 2(1): 2065–2074.
13.
ColliniL. Fatigue crack growth resistance of ECAPed ultrafine-grained copper. Eng Fract Mech2010; 77(6): 1001–1011.
14.
KunzLColliniL. Mechanical properties of copper processed by equal channel angular pressing – a review. Fract Struct Integr2012; 19: 61–75.
15.
FarrokhBKhanAS. Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling. Int J Plasticity2009; 25: 715–732.
16.
BuiQHPhamXT. Modeling of microstructure effects on the mechanical behaviour of ultrafine-grained nickels processed by hot isostatic pressing. Int J Mech Sci2011; 53: 812–826.
17.
KozlovEVZhdanovANPopovaNA. Subgrain structure and internal stress fields in UFG materials: problem of Hall–Petch relation. Mater Sci Eng A-Struct2004; 387–389: 789–794.
18.
FuHHBensonDJMeyersMA. Analytical and computational description of effect of grain size on yield stress of metals. Acta Mater2001; 49(13): 2567–2582.
19.
SchonfelderBGottsteinGShvindlermanLS. Atomistic simulations of grain boundary migration in Copper. Metall Mater Trans A2006; 37(6): 1757–1771.
20.
TsuzukiHBranicioPSRinoJP. Molecular dynamics simulation of fast dislocations in copper. Acta Mater2009; 57(6): 1843–1855.
21.
AsaroRJRiceJR. Strain localization in ductile single crystals. J Mech Phys Solids1977; 25(2): 309–338.
22.
HuangYQuSHwangKC. A conventional theory of mechanism-based strain gradient plasticity. Int J Plasticity2004; 20(4–5): 753–782.
23.
WuSDWangZGJiangCB. Shear bands in cyclically deformed ultrafine grained copper processed by ECAP. Mater Sci Eng A-Struct2004; 387–389: 560–564.
24.
WuSDWangZGJiangCB. The formation of PSB-like shear bands in cyclically deformed ultrafine grained copper processed by ECAP. Scripta Mater2003; 48(12): 1605–1609.
25.
GotoMHanSZEuhK. Formation of a high-cycle fatigue fracture surface and a crack growth mechanism of ultrafine-grained copper with different stages of microstructural evolution. Acta Mater2010; 58(19): 6294–6305.
26.
LiXWJiangQWWuY. Stress–amplitude-dependent deformation characteristics and microstructures of cyclically stressed ultrafine-grained copper. Adv Eng Mater2008; 10(8): 720–726.
27.
ColliniLNicolettoG. Determination of the relationship between microstructure and constitutive behaviour of nodular cast iron with a unit cell model. J Strain Anal Eng2005; 40(2): 107–116.
28.
NicolettoGColliniLKonečnáR. Analysis of nodular cast iron microstructures for micromechanical model development. Strain2006; 42(2): 89–96.
29.
ColliniL. La modellazione microstrutturale di materiali a struttura eterogenea: princìpi ed applicazioni. Fract Struct Integr2010; 12: 21–36.
DingH-ZMughrabiHHoeppelHW. A low-cycle fatigue life prediction model of ultrafine-grained metals. Fatigue Fract Eng Mater Struct2002; 25(2): 975–984.
32.
LapovokRDalla TorreFHSandlinJ. Gradient plasticity constitutive model reflecting the ultrafine micro-structure scale: the case of severely deformed copper. J Mech Phys Solids2005; 53(4): 729–747.
33.
TothLSMolinariAEstrinY. Strain hardening at large strains as predicted by dislocation based polycrystal plasticity model. J Eng Mater-T ASME2002; 124: 71–77.
34.
BaikSCHellmigRJEstrinY. Modeling of deformation behavior of copper under equal channel angular pressing. Z Metallkd2003; 94: 1–7.
35.
AshbyMF. The deformation of plastically non-homogeneous materials. Philos Mag1970; 21: 399–424.
36.
NixWDGaoH. Indentation size effects in crystalline materials: a law for strain gradient plasticity. J Mech Phys Solids1998; 46: 411–425.
37.
Dalla TorreFHLapovokRSandlinJ. Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes. Acta Mater2004; 52(16): 4819–4832.
38.
RambergWOsgoodWR. Description of stress–strain curves by three parameters. Technical note no. 902, 1943. Washington, DC: National Advisory Committee for Aeronautics.
39.
LefebvreSDevincreBHocT. Yield stress strengthening in ultrafine-grained metals: a two-dimensional simulation of dislocation dynamics. J Mech Phys Solids2007; 55(4): 788–802.
40.
GotoMHanSZKimSS. Growth mechanism of a small surface crack of ultrafine-grained copper in a high-cycle fatigue regime. Scripta Mater2009; 60(8): 729–732.
