Abstract
An approach is presented whereby small, unmanned aircraft can land on walls. The approach is demonstrated with a plane that uses an ultrasonic sensor to initiate a pitch-up maneuver as it flies toward a wall. The plane contacts the wall with spines that engage asperities on the surface. A non-linear suspension absorbs the kinetic energy while keeping the spines attached. A planar dynamic model is used to evaluate pitch-up maneuvers and determine suspension parameters that satisfy constraints on the contact forces for a range of flight velocities. Simulations conducted using the model are compared with data obtained using high-speed video and a force plate embedded in a wall.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
