This study examined the relationship between filament diameter and the microscopic morphology and mechanical properties of Fe-based coatings that were successfully created using plasma-enhanced high-speed arc spraying (PE-HAS). The findings indicate that the SB Coating, which has a wire diameter of 1.6 mm, has the best mechanical qualities, wear and corrosion resistance, and cross-section morphology. The outstanding organizational structure of the SB coating was responsible for the coatings’ stable friction coefficients of 0.35, 0.47, and 0.49 as well as their corrosion potentials of −1.007 V/SCE, −0.881 V/SCE, and −0.989 V/SCE, respectively.
ZhuBMQ. Effect of rust inhibitors and surface strengthening materials on service life of marine RC structures. Anti-Corros Methods Mater2021; 68: 255–268.
2.
ZhouDWangZZhangY, et al.Stimulated corrosion damage of Ti-Al-N multilayer coatings under interval salt spray and hot conditions. Corros Sci: J Environ Degrad Mater Control2023; 222: 111431.
3.
LiXWMaCHShiT, et al.Waterborne robust superhydrophobic PFDTES@TiO2-PU coating with stable corrosion resistance, long-term environmental adaptability, and delayed icing functions on Al-Li alloy. J Mater Res Technol2024; 32: 3357–3370.
4.
LiXWLiuHYGuoWL, et al.Effect of TiO2 content on the thermal control properties of Al2O3-xTiO2 composite coatings prepared by supersonic plasma spraying technology. J Mater Res Technol2024; 32: 3582–3593.
5.
TianHCuiZZhangX, et al.Effect of cathodic potential and corrosion product on tribocorrosion behavior of S420 steel in the marine environment. Mater Today Commun2024; 38: 108372.
6.
DongWLYangXFSongF, et al.Anti-friction and wear resistance analysis of cemented carbide coatings. Int J Adv Manuf Technol2022; 122: 2795–2821.
7.
YuanWLiRZhuY, et al.Structure and properties of nickel-plated CNTs/Fe-based amorphous composite coatings fabricated by high-speed laser cladding. Surf Coat Technol2022; 438: 128363.
8.
ChenRWanFYHeX, et al.Structural characteristics and evolution in the crack propagation process of NiCrAlY/YSZ gradient coatings through thermal shock at 900°C. Mater Sci Technol2024.
9.
YangKQZhangTLZhuZM, et al.Review of laser cladding coating on wear and fatigue of railway wheels/rails. Mater Sci Technol2024; 40: 651–664.
10.
YangHZhangBSunW, et al.The wear properties of Al-BN nanosheet coating by cold spray. Mater Sci Technol2024; 40: 441–448.
11.
AlroyRJKamarajMLakshmiD, et al.Tailoring microstructural features of Cr3C2–25NiCr coatings through diverse spray variants and understanding the high-temperature erosion behavior. Tribol Int2023. doi:https://doi.org/10.1016/j.triboint.2023.108810
12.
ZhouLLGuoWLZhuHF, et al.Research on the mechanism of NiCrBSi-WC/Co coatings wear resistance improvement by low-energy laser shock peening. Tribol Int2024; 199: 109957.
13.
GaoRHuangYFZhouXY, et al.Material system and tribological mechanism of plasma sprayed wear resistant coatings: overview. Surf Coat Technol2024: 130758.
14.
LiuMPengQQHuangYF, et al.Influencing factors and process optimization of Al/SiC powder-cored wires by plasma transferred wire arc spraying. J Therm Spray Technol2024; 33: 2167–2183.
15.
GildersleeveEJVaßenR. Thermally sprayed functional coatings and multilayers: a selection of historical applications and potential pathways for future innovation. J Therm Spray Technol2023; 32: 778–817.
16.
FaliCJunlingC. Property comparison of vacuum and air plasma sprayed tungsten coatings. J Alloys Compd2021; 861: 158422.
17.
SunJHuiYJiangJ, et al.Crystallization mechanism of plasma-sprayed LaMgAl11O19 coating. Appl Surf Sci2020; 504: 144509.
18.
LiuYMaGZhuL, et al.Effects of Al2O3 powder characteristics on microstructure, mechanical and tribological properties of inconel 625-Al2O3 non-skid coatings prepared by plasma enhanced high-velocity arc spraying. Tribol Int2024; 199: 110033.
19.
LiuYZhuLMaG, et al.Effects of Al2O3 content on the microstructure and performance of inconel 625-xAl2O3 composite non-skid coatings by plasma enhanced high-velocity arc spraying. Surf Coat Technol2024; 485: 130929.
20.
GuoGShenYWuK, et al.Effect of material position on microstructure and mechanical properties of friction stir welded dissimilar austenite–ferrite stainless steels joints. J Adhes Sci Technol2021; 35: 1320–1336.
21.
ZhangYYangCZhaoL, et al.Study on the electrochemical corrosion behavior of 304 stainless steel in chloride ion solutions. Int J Electrochem Sci2021; 16: 210251.
22.
JiangCLuJLiuW, et al.Corrosion resistance of plasma-sprayed Fe-based coatings by using core-shell structure powders. J Mater Res Technol2020; 9: 12273–12280.
23.
HuangTDengCSongP, et al.Investigation of oxide scale formation and internal oxidation of an Fe-based coating at 500°C and 600°C. Surf Coat Technol2020; 402: 126309.
24.
SunYJYangRXieL, et al.Interfacial bonding mechanism and properties of HVOF-sprayed Fe-based amorphous coatings on LA141 magnesium alloy substrate. Surf Coat Technol2021; 426: 127801.
25.
BijalwanPPandeyKKSharmaS, et al.Single-step approach to tune the wettability of plasma sprayed crystalline and amorphous Fe-based coating. Surf Interface2022; 30: 101979.
26.
NdumiaJNKangMGbenontinBV, et al.A review on the wear, corrosion and high-temperature resistant properties of wire arc-sprayed Fe-based coatings. Nanomaterials2021; 11: 2527.
27.
LiuQLiTHLiuN, et al.Microstructure and tribological behavior of supersonic atmospheric plasma-sprayed Mo-/Fe-based amorphous coating. J Therm Spray Technol2022; 31: 2370–2384.
28.
FalsHCOrozcoMSLourençatoLA, et al.Abrasive wear behavior of Fe-based amorphous/nanocrystalline Coatings deposited by high-velocity oxygen fuel and wire arc spray. J Mater Eng Perform2023; 32: 2455–2462.
29.
LiangDZhouYLiuX, et al.Wettability and corrosion performance of arc-sprayed Fe-based amorphous coatings. Surf Coat Technol2022; 433: 128129.
30.
PukasiewiczAGMBoerHDDSucharskiGB, et al.The influence of HVOF spraying parameters on the microstructure, residual stress and cavitation resistance of FeMnCrSi coatings. Surf Coat Technol2017; 327: 158–166.
31.
SilveiraLLPukasiewiczAGMde AguiarDJM, et al.Study of the corrosion and cavitation resistance of HVOF and HVAF FeCrMnSiNi and FeCrMnSiB coatings. Surf Coat Technol2019; 374: 910–922.
32.
ZhangTLiWSHongH, et al.Comparative study on the microstructure and properties of 304 stainless steel coatings prepared by high-velocity oxygen fuel spraying and air plasma spraying. 2024; 33: 1496–1509.
33.
CarlosRFadragasEVMoralesJA, et al.An alternative Cu-based bond layer for electric arc Coating process. J Therm Spray Technol2011; 20: 1183–1191.
34.
WangLLiuSGouJ, et al.Study on the wear resistance of graphene Modified nanostructured Al2O3/TiO2 Coatings. Appl Surf Sci2019; 492: 272–279.
35.
ZhangHXieYHuangL, et al.Effect of Feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous Coatings. Surf Coat Techno. 2014; 258: 495–502.
36.
PetrackovaKKondasJGuaglianoM, et al.Mechanical performance of cold-sprayed A357 sluminum alloy coatings for repair and additive manufacturing. J Therm Spray Technol2017; 26: 1888–1897.
37.
GuipontVJeandinMBansardS, et al.Bond strength determination of hydroxyapatite coatings on Ti-6Al-4V substrates using the LAser shock adhesion test (LASAT)V substrates using the LAser shock adhesion test (LASAT). J Biomed Mater Res A2010; 95A: 1096–1104.
38.
Harfouche MayaMAlidokht SimaAGrandyL, et al.Microstructural, Micromechanical, Wear, and Corrosion Properties of Cold Spray and Laser-Assisted Cold Spray CrMnCoFeNi Cantor HEA Coatings. J Therm Spray Technol2024.
39.
JoseSAKasarAKMenezesPL. Cold spray deposition of cermets: insights into bonding mechanism and critical parameters. Int J Adv Manuf Technol2024; 133: 1–23.
40.
AliAAysegulEMuhammetK. An investigation of oxidation, hot corrosion, and thermal shock behavior of atmospheric plasma-sprayed YSZ–Al2O3 composite thermal barrier coatings. Int J Mater Res2020; 111: 567–580.
41.
AliA. The Influence of Load and Ball on the Sliding Wear Characteristics of HVOF-Sprayed WC-12Co Composite Coating. Coatings2025; 15.
