Morphological Analysis of Foamed HDPE/LLDPE Blends by X-ray Micro-Tomography: Effect of Blending,Mixing Intensity and Foaming Temperature

Abstract

Non-invasive x-ray micro-computed tomography was employed for thorough quantitative and qualitative analysis of the cellular structure of foams made of linear low density polyethylene (LLDPE), high density polyethylene (HDPE) and their blends. Special emphasis was given to the differences between the results of 3D and 2D analyses, to evaluate the possible errors while studying the morphology using conventional 2D techniques (e.g. SEM). Blends with the weight compositions of 90%LLDPE/10%HDPE and 75%LLDPE/25%HDPE were produced at different rotor speeds of 10, 60 and 120 rpm and batch foaming was examined over a wide range of temperature. The void fraction values from 2D and 3D analysis were found to agree well with those obtained with the Archimedes method. Results showed more uniform cell size distribution for blends mixed at the lower spectrum of screw rotational speed. Among the blends with higher void fraction values and relatively uniform cellular structure, higher average cell size (3–30%) and cell population density (1.25–2.5 times) were noticed in 3D analysis compared with 2D data. The micro-CT images at different cross sections revealed anisotropic cell growth and more elongated cells along the thickness of the specimen. It was also observed that, with increase in foaming temperature, cell shrink prevailed over cell coalescence in the samples with lower viscosity (prepared at low rpm of 10), while for those with higher viscosity (prepared at an rpm of 60) cell coalescence was more dominant.