Epoxy-based chain extended high-melt-strength poly (lactic acid) (PLA) was prepared. Rheological properties and the thermal behaviours of the chain extended PLA were studied. The rheological properties indicated that the melt elasticity and melt strength of the chain extended PLA samples were gradually improved by increasing the content of chain extender (CE). Moreover, the thermal results showed that the crystallinity and the spheruilite morphology of PLA were greatly influenced due to the introduction of CE. The effect of CE contents on foam morphology was also studied. Adding CE resulted in higher expansion ratio and smaller cell size of PLA foams.
GarlottaD.A Literature Review of Poly (lactic acid). J. Polym. Environ., 9 (2001) 63–68.
2.
JohnR., HansD., and LehermeierJ.Polylactides: Properties and Prospects of an Environmentally Benign Plastic from Renewable Resources. J. Macromol. Sympo., 175 (2001) 55–66.
3.
SinghAuras R., and SinghS.P., Performance Evaluation of PLA Against Existing PET and PS Containers. J. Test. Eval., 34 (2006) 530–536.
SawyerD.J., Bioprocessing - No Longer a Field of Dreams. Macromol. Sympo., 201 (2003) 271–282.
6.
ByunY., KimY.T., and WhitesideS., Characterization of an Antioxidant Polylactic acid (PLA) Film Prepared with α-tocopherol, BHT and Polyethylene Glycol using Film Cast Extruder. J. Food Eng., 100 (2010) 239–244.
7.
DrumrightR.E., GruberP.R., and HentonD.E., Polylactic Acid Technology. J. Adv. Mater., 12 (2000) 1841–1846.
8.
WhitemanN., (2000) Polylactide, a New Thermoplastic for Extrusion Coating Polymers, Laminations and Coatings Conference, Chicago, IL, 631.
AstridJ.R., LasprillaA.R., and Guillermo, Polylactic acid Synthesis for Application in Biomedical Devices-A Review. J. Biotechnol. Adv., 30 (2012) 321–328.
11.
CarrascoF., and PagèsP., Processing of poly(lactic acid): Characterization of Chemical Structure, Thermal Stability and Mechanical Properties. Polym. Degrad. Stab., 95 (2010) 116–125.
12.
PalumboF.S., and PitarresiG., New Graft Copolymers of Hyaluronic Acid and Polylactic Acid: Synthesis and Characterization. J. Carbohy. Polym., 66 (2006) 379–385.
13.
CzeluśniakI., Synthesis and Characterization of Polylactide Functionalized Polyacetylenes. Euro. Polym. J., 47 (2011) 2111–2119.
14.
LangloisV., and KarineV.R., Synthesis and Hydrolytic Degradation of Graft Copolymers Containing Poly (lactic acid) Side Chains: in Vitro Release Studies of Bioactive Molecules. Polym. Degrad. Stabil., 76 (2002) 411–417.
15.
FukushimaK., Biodegradation of Poly (lactic acid) and its Nanocomposites. Polym. Degrad. Stabil., 94 (2009) 1646–1655.
16.
YasuniwaM., TsubakiharaS., and IuraK., Crystallization Behaviour of Poly (l-lactic acid). Polym., 47 (2006) 7554–7563.
17.
DiM.L., and Lorenzo, Calorimetric Analysis of Multiple Melting Behaviour of Poly (L-lactic acid). J. Appl. Polym. Sci., 100 (2006) 3145–3151.
18.
TsujiH., TakaiH., and SahaS.K., Isothemal and Non-isothermal Crystallization Behaviour of Poly (L-lactic acid): Effects of Stereocomplex as Nucleating Agent. Polym., 47 (2006) 3826–3837.
19.
NamJ.Y., RayS.S., and OkamotoM., Crystallization Behaviour and Morphology of Biodegradable Polylactid / Layered Silicate Nanocomposite. Macromol., 36 (2003) 7126–7131.
20.
RayS.S., MaitiP., and OkamotoM., New Polylactide/Layered Silicate Nanocomposite: Nanoscale Control Over Multiple Properties. Macromol., 35 (2002) 3104–3110.
21.
DayM., NawabyA.V., and LiaoX., A DSC Study of the Crystallization Behaviour of Polylactic Acid and its Nanocomposites. J. Therm. Anal. Calorim., 86 (2006) 623.
22.
ZhangJ.W., JiangL., and ZhuL.Y., Morphology and Properties of Soy Protein and Polylactide Blends. Int. J. Biol. Macromol., 7 (2006) 1551–1561.
23.
MathewP.A., and OksmanK., The Effect of Morphology and Chemical Characteristics of Cellulose Reinforcements on the Crystallinity of Polylactic Acid. J. Appl. Polym. Sci., 101 (2006) 300–310.
24.
MikosA.G., ThorsenA.J., and CzerwonkaL.A., Preparation and Characterization of Poly (L-lactic acid) Foams. Polym., 35 (1994) 1068–1077.
25.
ZhaiW.T., ParkC.B., and KontopoulouM., Nanosilica Addition Dramatically Improves the Cell Morphology and Expansion Ratio of Polypropylene Heterophasic Copolymer Foams Blown in ContinuousExtrusion. Ind. Eng. Chem. Res., 50 (2011) 7282–7289.
26.
AjiokaM., EnomotoK., and YamaguchiA., (1995) US Patent 5 447 962.
27.
WangL.Y., JingX.B., and HuangY.B., Blends of Linear and Long-Chain Branched Poly(L-lactide)s with High Melt Strength and Fast Crystallization Rate. Ind. Eng. Chem. Res., 51 (2012) 10088–10099.
28.
WangL.Y., JingX.B., and HuangY.B., Rheology and Crystallization of Long-Chain Branched Poly(L-lactide)s with Controlled Branch Length. Ind. Eng. Chem. Res., 51 (2012) 10731–10741.
29.
DiY.W., LannaceS., and MaiE.D., Reactively Modified Poly (lactic acid): Properties and Foam Processing. J. Macromol. Mater. Eng., 290 (2005) 1083–1090.
30.
ReignierJ., and GendronR., Champagne M.F., Extrusion foaming of Poly (lactic acid) blown with carbon dioxide: Toward 100% green material. J. Cell. Plast., 26 (2007) 83–115.
31.
LeeS.T., KarekoL., and JunJ., Study of Thermoplastic PLA Foam Extrusion. J. Cell. Plast., 44 (2008) 293–305.
32.
PillaS., KimS.G., and AuerG.K., Microcellular Extrusion Foaming of Polylactide with Chain-Extender. Polym. Eng. Sci., 49 (2009) 1653–1660.
33.
ZengJ.B., LiY.D., and ZhuQ.Y., A Novel Biodegradable Multiblock Poly (ester urethane) Containing Poly (L-lactic acid) and Poly (butylenes succinate) Blocks. Polymer, 50 (2009) 1178–1186.
34.
MengQ., HeuzeyM.C., and CarreauP.J., Control of thermal degradation of polylactide/clay nanocomposites during melt processing by chain extension reaction. Polym. Degrad. Stab., 97 (2012) 2010–2020.
35.
TakadaM., HasegawaS., and OhshimaM., Crystallization Kinetics of Poly(L-lactide) in Contact With Pressurized CO2. Polym. Eng. Sci., 44 (2004) 186–196.
36.
MihaiM., HuneaultM.A., and FavisB.D., Crystallinity Development in Cellular Poly(lactic acid) in the Presence of Supercritical Carbon Dioxide. J. Appl. Polym. Sci., 113 (2009) 2920–2932.
37.
FischerE.W., SterzelJ.H., and WegnerG., Investigation of the Structure of Solution Grown Crystals of Lactide Copolymers by means of Chemical Reactions. Coll. Polym. Sci., 251 (1973) 980–990.
38.
SantisD., and PantaniF.R., Nucleation and Crystallization Kinetics of Poly (lactic acid). J. Thermochimica Acta, 522 (2011) 128–134.
39.
LorenzoD., and CoccaM.L.M., Crystal Polymorphism of Poly (L-lactic acid) and its Influence on Thermal Properties. Thermochim. Acta, 522 (2011) 110–117.
40.
LinY., ZhangK.Y., and LiY.S., Study of hydrogen-bonded blend of polylactide with biodegradable hyperbranched poly(ester amide). Macromolecules, 40 (2007) 6257–6267.
41.
SarasuaJ.R., and Prud'hommeR.E., Wisniewski M., Crystallization and Melting Behavior of Polylactides. Macromolecules, 31 (1998) 3895–3905.
42.
MiyataT., and MasukoT., Crystallization Behaviour of Poly (L-lactide). Polym., 39 (1998) 5515–5521.
43.
WangY., and FunariS.S., Influence of Semicrystalline Morphology on the Glass Transition of Poly(L-lactic acid). Macromol. Chem. Phys., 207 (2006) 1262–1271.
44.
LeeJohn W.S., and WangK., Challenge to Extrusion of Low-Density Microcellular Polycarbonate Foams Using Supercritical Carbon Dioxide. J. Ind. Eng. Chem., 44 (2005) 92–99.
45.
WongA., LeungS.N., and LiG.Y., Role of Processing Temperature in Polystyrene and Polycarbonate Foaming with Carbon Dioxide. J. Ind. Eng. Chem., 46 (2007) 7107–7116.
46.
HanX.M., KurtW., and KoellingD., Effect of Die Temperature on the Morphology of Microcellular Foams. Polym. Eng. Sci., 43 (2003) 1206–1220.
47.
LeeM., ParkC.B., and TzoganakisC., Measurements and Modeling of PS/supercritical CO2 Solution Viscosities. Polym. Eng. Sci., 39 (1999) 99–109.
48.
LeungS.N., WongA., and ParkC.B., Strategies to Estimate the Pressure Drop Threshold of Nucleation for Polystyrene Foam with Carbon Dioxide. J. Ind. Eng. Chem., 48 (2009) 1921–1927.
49.
HingmannR., and MarczinkeB.L., Shear and Elongational Flow Properties of Polypropylene Melts. J. Rheol., 38 (1994) 573–588.
