This paper examines the issues associated with the real-time measurement of viscosity in a single-screw extruder. To this end, the static and dynamic performance of a side-stream and in-line rheometer are compared. Side-stream sampling techniques were shown to be inappropriate for accurate detection of process dynamics. In-line rheometers may detect process dynamics but there are practical limitations on their use in an industrial environment.
Bird, R. B. , Armstrong, R. C. and Hassager, O.1977: Dynamics of polymeric liquids. Vol. 1: Fluid mechanics, second edition. Wiley .
2.
Broadhead, T. O. , Patterson, W. I. and Dealy, J. M.1996: Closed loop viscosity control of reactive extrusion with an in-line rheometer . Polymer Engineering and Science36, 2840-2851 .
3.
Brown, E. C. , Kelly, A. L. and Coates, P. D. 2004: Melt temperature homogeneity in single screw extrusion: effect of material type and screw geometry . ANTEC 2004, Society of Plastics Engineers, 183-187 .
4.
Bur, A. J. , Roth, S. C. , Lee, Y. and Mcbrearty, M.2004: A dielectric slit die for in-line monitoring of polymer compounding . Review of Scientific Instruments75, 1103-1109 .
5.
Chiu, S. and Lin, C.1998: Applying the constrained minimum variance control theory on in-line viscosity control in the extrusion molding process . Journal of Polymer Research5, 171-175 .
6.
Chiu, S. and Pong, S.2001: In-line viscosity fuzzy control . Journal of Applied Polymer Science79, 1249-1255 .
7.
Chiu, S. , Yiu, H. and Pong, S.1997: Development of an in-line viscometer in an extrusion molding process . Journal of Applied Polymer Science63, 919-924 .
8.
Chiu, S. H. and Pong, S. H.1999: In-line viscosity control in an extrusion process with a fuzzy gain scheduled PID controller . Journal of Applied Polymer Science74, 541-555 .
9.
Coates, P. D. , Barnes, S. E. , Sibley, M. G. , Brown, E. C. , Edwards, H. G. M. and Scowen, I. J.2003: In-process vibrational spectroscopy and ultrasound measurements in polymer melt extrusion . Polymer44, 5937-5949 .
10.
Cogswell, F. N.1981: Polymer melt rheology. Woodhead Publishing Ltd.
11.
Dealy, J. M. and Broadhead, T. O.1993: Process rheometers for molten plastics: a survey of existing technology . Polymer Engineering and Science33, 1513-1523 .
12.
Fleming, D.J. 1993: In-line rheometry studies in reactive extrusion. PhD thesis, University of Bradford.
13.
Gottwald, A. and Scheler, U.2005: Extrusion monitoring of polymer melts using a high-temperature surface-NMR probe . Macro-molecular Materials and Engineering290, 438-442 .
14.
Han, C. D. and Charles, M.1970: A criterion for fully developed flow of polymer melts in a circular tube . AIChE Journal16, 499-501 .
15.
Kamal, M. R. and Nyun, H.1980: Capillary viscometry: a complete analysis including pressure and viscous heating effects . Polymer Engineering and Science20, 109-119 .
16.
Kelly, A. L. , Brown, E. C. , Woodhead, M. and Coates, P. D. 2002: Melt temperature field measurement and modelling extrusion . ANTEC 2002, Volume 3: Special Areas, Society of Plastics Engineers, 3367-3372 .
17.
McAfee, M. , Caldwell, L. , Thompson, S. and McNally, G. 2003: Design of a soft sensor for polymer extrusion . ANTEC 2003, Volume 1: Processing, Society of Plastics Engineers, 207-212 .
18.
Morrison, F. A.2001: Understanding rheology, first edition. Oxford University Press .
19.
Padmanabhan, M. and Bhattacharya, M.1994: In-line measurement of rheological properties of polymer melts . Rheologica Acta33, 71-87 .
20.
Rauwendaal, C. and Fernandez, F.1985: Experimental study and analysis of a slit die viscometer . Polymer Engineering and Science25, 765-771 .
21.
Revesz, H. and Hubeny, H. 1976: Continuous measurement and control of viscosity throughout the extrusion process . 3rd IFAC Conference on Instrumentation and Automation in the Paper Rubber and Plastics Industries, 69-76 .
22.
Ross, C. , Molloy, R. and Chen, S. 1990: Melt viscosity monitoring as a measure of melt quality in injection-molding . ANTEC 1990, Society of Plastics Engineers, 243-248 .
23.
Tanner, R. I.2000: Engineering rheology, second edition. Oxford University Press .
