This study focuses on investigating the mechanical and fracture characteristics of thermoplastic elastomeric compounds used in various industries, including environmental and medical applications. Specifically, the paper examines the effects of ethylene propylene diene monomer (EPDM) and halloysite (HNT) fillers on the mechanical properties of unvulcanized and dynamically vulcanized polypropylene (PP) blend polymer nanocomposites. The concentrations of EPDM and HNT were varied, along with the inclusion of polypropylene-g-maleic anhydride (PP-g-MA). A full factorial design approach was employed to thoroughly analyze the impact of each factor on the outcomes. The fracture properties were assessed using the essential work of fracture (EWF) methodology. The results indicate that incorporating 10 to 20 wt.% of EPDM significantly improved the elongation at break (166%) and non-EWF (33%). Furthermore, the addition of 3 wt.% HNT led to enhancements in tensile strength, modulus, and non-EWF. Notably, the dynamically vulcanized compounds and those containing PP-g-MA exhibited superior mechanical and fracture properties compared to the unvulcanized counterparts.
KhaliliPSkrifvarsMDhakalHN, et al.Regenerated cellulose fabric reinforced bio-based polypropylene sandwich composites: fabrication, mechanical performance and analytical modelling. J Mater Res Technol2023; 22: 3423–3435.
2.
ShenQLiuXZhaoR, et al.Maintaining modulus of polypropylene composites with ultra-high low temperature toughness by synergistic branched polyethylene and nucleating agents. J Mater Res Technol2023; 27: 2989–3004.
3.
SadeghiAAshenai GhasemiFFasihiM, et al.Experimental analysis of tensile properties and essential work of fracture of fumed silica filled polypropylene toughened with thermoplastic polyolefin elastomer. J Compos Mater2022; 56(16): 2621–2638.
4.
BalajiKVShirvanimoghaddamKYadavR, et al.Hybrid heterophasic polypropylene composites with basalt fibers and magnesium oxysulfate reinforcements for sustainable automotive materials. J Mater Res Technol2024; 28: 546–559.
5.
KamalvandHAshenai GhasemiFFasihiM, et al.An experimental investigation of the tensile, fracture and microstructural characteristics of ABS/SBS reinforced with HNTs. Polym Compos2023; 44(10): 6482–6494.
6.
KhodabandelouMRazavi AghjehMK. Impact behavior of CNT-filled PP/EPDM blends: effect of dynamic vulcanization and PP-g-MA compatibilizer. Polym Bull2016; 73: 1607–1626.
7.
HajibabazadehSRazavi AghjehMKPalahangM. Study on the fracture toughness and deformation micro-mechanisms of PP/EPDM/SiO2 ternary blend-nanocomposites. J Compos Mater2020; 54(5): 591–605.
8.
KimBCHwangSSLimKY, et al.Toughening of PP/EPDM blend by compatibilization. J Appl Polym Sci2000; 78(6): 1267–1274.
9.
KhodabandelouMRazavi AghjehMKKhonakdarHA, et al.Effect of localization of carbon nanotubes on fracture behavior of un-vulcanized and dynamically vulcanized PP/EPDM/MWCNT blend-nanocomposites. Compos Sci Technol2017; 149: 134–148.
10.
ZhaoYLiuZSuB, et al.Property enhancement of PP-EPDM thermoplastic vulcanizates via shear-induced break-up of nano-rubber aggregates and molecular orientation of the matrix. Polymers2015; 63: 170–178.
11.
HaghnegahdarMNaderiGGhoreishyMH. Fracture toughness and deformation mechanism of un-vulcanized and dynamically vulcanized polypropylene/ethylene propylene diene monomer/graphene nanocomposites. Compos Sci Technol2017; 141: 83–98.
12.
KakehBFasihiMGhasemiFA, et al.Effect of halloysite nanotubes on deformation mechanism and work of fracture of thermoplastic elastomer toughened polypropylene. J Appl Polym Sci2022; 139(47): e53182.
13.
SajjadiSAAshenai GhasemiFRajaeeP, et al.Evaluation of fracture properties of 3D printed high impact polystyrene according to essential work of fracture: effect of raster angle. Addit Manuf2022; 59: 103191.
14.
Mehrabi MazidiMRazavi AghjehMK. Synergistic toughening effects of dispersed components in PP/PA6/EPDM ternary blends; quantitative analysis of the fracture toughness via the essential work of fracture (EWF) methodology. RSC Adv2015; 5(58): 47183–47198.
15.
KhodabandelouMRazavi AghjehMKMazidiMM. Fracture toughness and failure mechanisms in un-vulcanized and dynamically vulcanized PP/EPDM/MWCNT blend-nanocomposites. RSC Adv2015; 5(87): 70817–70831.
16.
RajaeePAshenai GhasemiFFasihiM, et al.Effect of fumed silica and halloysite nanoparticles on the microstructure, mechanical, and fracture properties of thermoplastic polyolefin elastomer toughened polypropylene. Polym Compos2022; 43(7): 4495–4518.
17.
RajaeePAshenai GhasemiFFasihiM, et al.Multi-response optimization of tensile and fracture properties of polypropylene/ethylene-vinyl acetate/exfoliated graphite by the design of experiment. J Elastomers Plast2022; 54(6): 1000–1024.
18.
CotterellBReddelJK. The essential work of plane stress ductile fracture. Int J Fract1977; 13: 267–277.
19.
MaiYWCotterellB. On the essential work of ductile fracture in polymers. Int J Fract1986; 32: 105–125.
20.
MaiYWPowellP. Essential work of fracture and j-integral measurements for ductile polymers. J Polym Sci B Polym Phys1991; 29(7): 785–793.
21.
Karger-KocsisJCzigányTMoskalaEJ. Thickness dependence of work of fracture parameters of an amorphous copolyester. Polymers1997; 38(18): 4587–4593.
22.
RajaeePAshenai GhasemiFFasihiM. Comments on “essential work of fracture analysis for surface modified carbon fiber/polypropylene composites with different interfacial adhesion” [polymer composites 41 (9)(2020): 3541–3551]. Polym Compos2022; 43(3): 1505–1507.
23.
RajaeePAshenai GhasemiFFasihiM. Comments on “identification of micro-failure processes of HDPE-henequen fiber composite material by using acoustic emission monitoring: effect of fiber surface modification”. Polym Compos2023; 44(8): 5296–5299.
24.
MontgomeryDC. Design and analysis of experiments. New York, NY: John Wiley, 2001.
25.
GonzalezIEguiazabalJINazabalJ. Toughening and brittle-tough transition in blends of an amorphous polyamide with a modified styrene/ethylene-butylene/styrene triblock copolymer. Polym Eng Sci2009; 49(7): 1350–1356.
26.
Souri RudabadiMAshenai GhasemiFFasihiM, et al.An experimental study on the microstructural, tensile, and fracture properties of biodegradable polylactic acid blended with thermoplastic corn starch filled with halloysite nanotubes. Ind Crops Prod2023; 201: 116922.
27.
SajjadiSAAshenai GhasemiFFasihiM, et al.Fracture toughness of PA6/POE-g-MA/TiO2 ternary nanocomposites according to the essential work fracture method. Polym Compos2023; 44(7): 27364.
28.
LeeHSFasuloPDRodgersWR, et al.TPO based nanocomposites. Part 1. Morphology and mechanical properties. Polymers2005; 46(25): 11673–11689.
29.
KhatuaBBLeeDJKimHY, et al.Effect of organoclay platelets on morphology of nylon-6 and poly (ethylene-r an-propylene) rubber blends. Macromolecules2004; 37(7): 2454–2459.
30.
JarnthongMNakasonCLopattananonN, et al.Influence of incorporation sequence of silica nanoparticles on morphology, crystallization behavior, mechanical properties, and thermal resistance of melt blended thermoplastic natural rubber. Polym Compos2012; 33(11): 1911–1920.
31.
EliasLFenouillotFMajestéJC, et al.Immiscible polymer blends stabilized with nano-silica particles: rheology and effective interfacial tension. Polymers2008; 49(20): 4378–4385.
32.
EliasLFenouillotFMajestéJC, et al.Morphology and rheology of immiscible polymer blends filled with silica nanoparticles. Polymers2007; 48(20): 6029–6040.
33.
HejaziISharifFGarmabiH. Effect of material and processing parameters on mechanical properties of polypropylene/ethylene–propylene–diene–monomer/clay nanocomposites. Mater Des2011; 32(7): 3803–3809.
34.
EzzatiPGhasemiIKarrabiM, et al.Rheological behaviour of PP/EPDM blend: the effect of compatibilization. Iran Polym J (Engl Ed)2008; 17(9): 669–679.
35.
XuCZhengZWuW, et al.Dynamically vulcanized PP/EPDM blends with balanced stiffness and toughness via in-situ compatibilization of MAA and excess ZnO nanoparticles: preparation, structure and properties. Compos B Eng2019; 160: 147–157.
36.
RameshSPunithamoorthyK. Synthesis, characterization and gas permeability properties of a novel nanocomposite based on poly (ethylene-co-vinyl acetate)/polyurethane acrylate/clay. J Mater Res Technol2019; 8(5): 4173–4181.
37.
BikiarisDNVassiliouAPavlidouE, et al.Compatibilisation effect of PP-g-MA copolymer on iPP/SiO2 nanocomposites prepared by melt mixing. Eur Polym J2005; 41(9): 1965–1978.
38.
NicoliniAde Campos RochaTLMaldaner JacobiMA. Dynamically vulcanized PP/EPDM blends: influence of curing agents on the morphology evolution. J Appl Polym Sci2008; 109(5): 3093–3100.
39.
RajaeePGhasemiFAFasihiM, et al.Effect of styrene-butadiene rubber and fumed silica nano-filler on the microstructure and mechanical properties of glass fiber reinforced unsaturated polyester resin. Compos B Eng2019; 173: 106803.
40.
PourrahmaniHGolparvarMFasihiM. A new evaluation criterion for optimizing the mechanical properties of toughened polypropylene/silica nanocomposites. Chin J Polym Sci2020; 38: 877–887.
41.
HasanpourMMazidiMMAghjehMK. The effect of rubber functionality on the phase morphology, mechanical performance and toughening mechanisms of highly toughened PP/PA6/EPDM ternary blends. Polym Test2019; 79: 106018.
42.
Mehrabi MazidiMRazavi AghjehMKHasanpourM. Fracture resistance and micromechanical deformations in PP/PA6/EPDM ternary blends: effect of rubber functionality, dispersion state and loading conditions. Eng Fract Mech2018; 191: 65–81.
43.
HaghnegahdarM. Evaluation of specific total work of fracture in polypropylene/ethylene-propylene diene monomer nanocomposites based on various graphene derivatives: optimization by response surface methodology technique and correlation with microstructure properties. Polym Compos2023; 44(2): 778–799.
44.
Mehrabi MazidiMRazavi AghjehMKAbbasiF. Evaluation of fracture toughness of ABS polymers via the essential work of fracture (EWF) method. J Mater Sci2012; 47(17): 6375–6386.
45.
HeidariFAghalariMTehranAC, et al.Study on the fluidity, mechanical and fracture behavior of ABS/TPU/CNT nanocomposites. J Thermoplast Compos Mater2021; 34(8): 1037–1051.
46.
GongGXieBHYangMB, et al.Mechanical properties and fracture behavior of injection and compression molded polypropylene/coal gangue powder composites with and without a polymeric coupling agent. Compos A: Appl Sci2007; 38(7): 1683–1693.
47.
YilmazSKodalMYilmazT, et al.Fracture toughness analysis of O-POSS/PLA composites assessed by essential work of fracture method. Compos B Eng2014; 56: 527–535.
48.
SaminathanKSelvakumarPBhatnagarN. Fracture studies of polypropylene/nanoclay composite. Part II: failure mechanism under fracture loads. Polym Test2008; 27(4): 453–458.
49.
BiswasRKuarASMitraS. Process optimization in Nd: YAG laser microdrilling of alumina–aluminium interpenetrating phase composite. J Mater Res Technol2015; 4(3): 323–332.
50.
RajaeePAshenai GhasemiFFasihiM, et al.Microstructural analysis and multi-response optimization of mechanical properties of bulk molding compound. Polym Compos2022; 43(1): 593–607.
