In this research, the effect of maleic anhydride–grafted styrene–ethylene/butylene–styrene (SEBS-g-MAH) compatibilizer on different properties of polycarbonate and poly(acrylonitrile–butadiene–styrene) (PC/ABS) blends was investigated. For this purpose, blends of PC and ABS at different ratios, without and with varying concentrations of compatibilizer, were prepared by melt compounding in a co-rotating twin-screw extruder followed by injection molding. The effectiveness of the compatibilizer was investigated by studying the microstructure and the mechanical, thermal, and rheological properties of the blends. It was found that the addition of the compatibilizer increases tensile strength, modulus, elongation at break, impact strength, complex viscosity, and thermal stability. This effect was noted at a loading of 1 wt% of compatibilizer, where enhanced interactions between the PC and ABS can be seen. Rheological methods, based on dynamic viscoelastic tests, allowed us to distinguish between emulsion-like and co-continuous morphologies and allowed an insight into the effect of the compatibilizer on the interfacial tension.
GrecoRAstaritaMFDongL. Polycarbonate/ABS blends: processability, thermal properties, and mechanical and impact behavior. Adv Polym Tech1994; 13: 259–274.
2.
WildesGKeskkulaHPaulDR. Fracture characterization of PC/ABS blends: effect of reactive compatibilization, ABS type and rubber concentration. Polymer1999; 40:7089–7107.
3.
GuotaoYXiaodongWDezhenW. Development of light weight thermoplastic composites based on polycarbonate/acrylonitrile–butadiene–styrene copolymer alloys and recycled carbon fiber: preparation, morphology, and properties. J Appl Polym Sci2013; 129: 3502–3511.
4.
MariannaITEmmanouilMCPetroulaAT. Compatibilization mechanism and property improvement of immiscible engineering plastic blends. Macromol Sym2013; 331–332: 81–88.
5.
In-SooHYunKLHeonSL. Effects of multi-walled carbon nanotube (MWCNT) dispersion and compatibilizer on the electrical and rheological properties of polycarbonate/poly(acrylonitrile–butadiene–styrene)/MWCNTcomposites. J Mater Sci2014; 49: 4522–4529.
6.
KuthanováVHausnerováBKitanoK. Linear viscoelastic and morphological description of multiphase systems affected by processing parameters. J Appl Polym Sci2011; 119: 989–999.
7.
BalakrishnanaSNeelakantanaNRSahebbND. Rheological and morphological behaviour of blends of polycarbonate with unmodified and maleic anhydride grafted ABS. Polymer1998; 39: 5765–5771.
8.
KracheRBenachourDCagiaoME. Micromechanical studies on binary and ternary blends of polyethylene, polypropylene, and polyamide 66: influence of the compatibilizer. Int J Polym Mater2003; 52: 939–956.
9.
KimJHKimCK. Changes in the interfacial properties of PC/SAN blends with compatibilizer. J Appl Polym Sci2003; 89: 2649–2656.
10.
SundararajUMacoskoCW. Drop breakup and coalescence in polymer blends: the effects of concentration and compatibilization. Macromolecules1995; 28: 2647–2657.
11.
ChenCCWhiteJL. Compatibilizing agents in polymer blends, interfacial tension, phase morphology and mechanical properties. Polym Eng Sci1993; 33: 923–930.
12.
KracheRBenachourDPötschkeP. Binary and ternary blends of polyethylene, polypropylene, and polyamide 6,6: the effect of compatibilization on the morphology and rheology. J Appl Polym Sci2004; 94: 1976–1985.
13.
DobrovszkyKRonkayF. Investigation of compatibilization effects of SEBS-g-MA on polystyrene/polyethylene blend with a novel separation method in melted state. Polym Bull2016; 73: 2719–2739.
14.
WildesGSHaradaTKeskkulaH. Synthesis and characterization of an amine-functional SAN for the compatibilization of PC/ABS blends. Polymer1999; 40: 3069–3082.
15.
PangYXJiaDMHuHJ. Effects of a compatibilizing agent on the morphology, interface and mechanical behaviour of polypropylene/poly(ethylene terephthalate) blends. Polymer2000; 41: 357–365.
16.
BalakrishnanSNeelakantanNR. Mechanical properties of blends of polycarbonate with unmodified and maleic anhydride grafted ABS. Polym Int1998; 45: 347–352.
17.
TjongSCMengYZ. Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends. Eur Polym J2000; 36: 123–129.
18.
LimJCChoKYParkJK. Weld line characteristics of PC/ABS blend II: effect of reactive compatibilizer. J Appl Polym Sci2008; 108: 3632–3643.
19.
TasdemirM. Properties of acrylonitrile–butadiene–styrene/polycarbonate blends with styrene–butadiene–styrene block copolymer. J Appl Polym Sci2004; 93: 2521–2527.
20.
ZhangXChenYZhangY. Effects of ABS-g-MAH on mechanical properties and compatibility of ABS/PC alloy. J Appl Polym Sci2001; 81: 831–836.
21.
YangKLeeSHOhJM. Effects of viscosity ratio and compatibilizers on the morphology and mechanical properties of polycarbonate/acrylonitrile-butadiene-styrene blends. Polym Eng Sci1999; 39: 1667–1677.
22.
ChoCGParkTHKimYS. Interfacial enrichment of a compatibilizing graft copolymer in a partially miscible polymer blend. Polymer1997; 38: 4687–4696.
23.
JohnHHKiHSHyungGL. Morphological, mechanical and rheological properties of poly(acrylonitrile-butadiene styrene)/polycarbonate/poly(ε-caprolactone) ternary blends. Macromol Res2007; 15: 520–526.
ZhangHGuoWYuY. Structure and properties of compatibilized recycled poly(ethylene terephthalate)/linear low density polyethylene blends. Eur Polym J2007; 43: 3662–3670.
27.
LiBWanCYZhangY. Blends of poly(2,6- dimethyl-1,4-phenylene oxide)/polyamide 6 toughened by maleated polystyrene-based copolymers: mechanical properties, morphology, and rheology. J Appl Polym Sci2010; 115: 3385–3392.
28.
LeeCHLeeYMChoiHK. Effect of a functional triblock elastomer on morphology in polyamide 6/polycarbonate blend. Polymer1999; 40: 6321–6327.
29.
HoriuchiSMatchariyakulNYaseK. Compatibilizing effect of a maleic anhydride functionalized SEBS triblock elastomer through a reaction induced phase formation in the blends of polyamide 6 and polycarbonate: 1. Morphology and interfacial situation. Polymer1996; 37: 3065–3078.
30.
HoriuchiSMatchariyakulNYaseK. Compatibilizing effect of maleic anhydride functionalized SEBS triblock elastomer through a reaction induced phase formation in the blends of polyamide 6 and polycarbonate: 2. Mechanical properties. Polymer1997; 38: 59–78.
31.
HoriuchiSMatchariyakulNYaseK. Compatibilizing effect of a maleic anhydride functionalized SEBS triblock elastomer through a reaction induced phase formation in the blends of polyamide 6 andpolycarbonate–III. Microscope studies on the deformation mechanism. Polymer1997;38: 6317–6327.
TjongSCBaoSPLiangGD. Polypropylene/montmorillonite nanocomposites toughened with SEBS-g-MA: structure–property relationship. J Polym Sci Part B: Polym Phys2005; 43: 3112–3126.
34.
MoinijazaniOArefazarAJafariSH. A study on the effects of SEBS-g-MAH on the phase morphology and mechanical properties of polypropylene/polycarbonate/SEBS ternary polymer blends. J Appl Polym Sci2011; 121: 2680–2687.
35.
Holsti-MiettinenRMSeppäläJVIkkalaOT. Functionalized elastomeric compatibilizer in PA 6/PP blends and binary interactions between compatibilizer and polymer. Polym Eng Sci1994; 34: 395–404.
36.
Holsti-MiettinenRMSeppäläJVIkkalaOT. Effects of compatibilizers on the properties of polyamide/polypropylene blends. Polym Eng Sci1992; 32: 868–877.
37.
HeinoMKirjavaJHietaojaP. Compatibilization of polyethylene terephthalate/polypropylene blends with styrene–ethylene/butylene–styrene (SEBS) block copolymers. J Appl Polym Sci1997; 65: 241–249.
38.
MoinijazaniOArefazarASayebMR. Evaluation of mechanical properties of polypropylene/polycarbonate/SEBS ternary polymer blends using Taguchi experimental analysis. J Appl Polym Sci2010; 116: 2312–2319.
39.
LeeYKLeeJBParkDH. Effects of accelerated aging and compatibilizers on the mechanical and morphological properties of polypropylene and poly(acrylonitrile-butadiene-styrene) blends. J Appl Polym Sci2013; 127: 1032–1037.
40.
LepersJHFavisBDTabarRJ. The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends. J Polym Sci Part B: Polym Phys1997; 35: 2271–2780.
41.
YinNZhangYXZhangY. Preparation and properties of PC/SAN alloy modified with styrene-ethylene-butylene-styrene block copolymer. J Appl Polym Sci2007; 106: 637–643.
42.
ZhaoBWangQHuG. Effect of methyl methacrylate graft acrylonitrile-butadiene-styrene on morphology and properties of polycarbonate/acrylonitrile–butadiene-styrene blend. J Macromol Sci-B2012; 51: 2276–2283.
43.
FarzadfarANouriKhorasaniS. Effect of EVA-g-MAH on mechanical properties of PC/ ABS blends. Polym Plast Technol Eng2012; 51: 1424–1426.
44.
BorahJSChakiTK. Dynamic rheological, morphology and mechanical properties of compatibilized LLDPE/EMA blends. J Polym Res2011; 18: 907–916.
45.
PötschkePPaulDR. Formation of co-continuous structures in melt mixed immiscible polymer blends. J Macromol Sci Part C2003; 43: 87–141.
LeeMPHiltnerABaerE. Phase morphology of injection-moulded polycarbonate/acrylonitrile-butadiene-styrene blend. Polymer1992; 33: 685–697.
48.
PeydróMAParresFCrespoJE. Recovery of recycled acrylonitrile–butadiene–styrene, through mixing with styrene–ethylene/butylene–styrene. J Mater Process Techol2013; 213: 1268–1283.
49.
PangXYJiaDMHuaHJ. Effects of a compatibilizing agent on the morphology, interface and mechanical behaviour of polypropylene/poly(ethylene terephthalate) blends. Polymer2000; 41: 357–365.
50.
XanthosMYoungMWBiesenbergerJA. Polypropylene/polyethylene terephthalate blends compatibilized through functionalization. Polym Eng Sci1990; 30: 355–365.
51.
KracheRDebbahI. Some mechanical and thermal properties of PC/ABS blends. Mater Sci Appl2011; 2: 404–410.
LiuXBertilssonH. Recycling of ABS and ABS/PC blends. J Appl Polym Sci1999; 74: 510–515.
54.
JangBCHuhSYJangJG. Mechanical properties and morphology of the modified HDPE/starch reactive blend. J Appl Polym Sci2001; 82: 3313–3320.
55.
HuangJJKeskkulaHPaulDR. Rubber toughening of an amorphous polyamide by functionalized SEBS copolymers: morphology and Izod impact behavior. Polymer2004; 45: 4203–4215.
ZhaoGPanZWangJ. Toughening and compatibilization of acrylonitrile–butadiene–styrene/poly (ethylene terephthalate) blends. Macromol Sci Phys2011; 50: 821–830.
58.
FarzadfarANouriKhorasaniSKhaliliS. Blends of recycled polycarbonate and acrylonitrile–butadiene–styrene: comparing the effect of reactive compatibilizers on mechanical and morphological properties. Polym Inter2014; 63: 145–150.
BenmesliSRiahiF. Dynamic mechanical and thermal properties of a chemically modified polypropylene/natural rubber thermoplastic elastomer blend. Polym Test2014; 36: 54–61.
61.
XueMLYuYLChuahHH. Miscibility and compatibilization of poly(trimethylene terephthalate)/acrylonitrile–butadiene–styrene blends. Eur Polym J2007; 43: 3826–3837.
62.
VinckierILaunHM. Manifestation of phase separation processes in oscillatory shear: droplet matrix systems versus co-continuous morphologies. Rheol Acta1999; 38: 274–286.
63.
WangJVelankarS. Strain recovery of model immiscible blends: effects of added compatibilizer. Rheol Acta2006; 45: 741–753.
64.
SilvaJMachadoAVMaiaJ. Rheological behaviour of compatibilized and non-compatibilized PA6/EPM blends. Rheol Acta2007; 46: 1091–1097.
65.
SilvaJMachadoAVMoldenaersP. The effect of interfacial properties on the deformation and relaxation behaviour of PMMA/PS blends. J Rheol2010; 54: 797–813.
66.
López-BarrónCRMacoskoCW. Rheological and morphological study of cocontinuous polymer blends during coarsening. J Rheol2012; 56: 1315–1334.
67.
López-BarrónCRMacoskoCW. Rheology of compatibilized immiscible blends with droplet-matrix and cocontinuous morphologies during coarsening. J Rheol2014; 58: 1935–1953.
68.
MartinJDVelankarS. Effects of compatibilizer on immiscible polymer blends near phase inversion. J Rheol2007; 51: 669–692.
69.
LiRYuWZhouC. Rheological characterization of droplet matrix versus co-continuous morphology. J Macromol Sci B2006; 45: 889–898.
70.
PalierneJF. Linear rheology of viscoelastic emulsions with interfacial tension. Rheol Acta1990; 29: 204–214.
71.
JungHJSonYParkOO. Influence of acrylonitrile in styrene-acrylonitrile copolymer on the phase morphology and interfacial tension in blends of polycarbonate/styrene acrylonitrile copolymer. Macromol Res2014; 22: 146–153.
72.
ChunJHMaengKSSuhKS. Miscibility and synergistic effect of impact strength in polycarbonate/ABS blends. J Mater Sci1991; 26: 5347–5352.
73.
YeeMCalvaoPSDemarquetteNR. Rheological behaviour of poly(methyl methacrylate)/polystyrene (PMMA/PS) blends with the addition of PMMA-ran-PS, Rheol Acta2007; 46: 653–664.
74.
YuWLiRZhouC. Rheology and phase separation of polymer blends with weak dynamic asymmetry. Polymer2011; 52: 2693–2700.
75.
SangronizLMoncerrateMAde AmicisVA. The outstanding ability of nanosilica to stabilize dispersions of nylon 6 droplets in a polypropylene matrix. J Polym Sci Part B: Polym Phys2015; 53: 1567–1579.
76.
WillemseRCPosthuma de BoerAvan DamJ. Co-continuous morphologies in polymer blends: the influence of the interfacial tension. Polymer1999; 40: 827–834.
77.
ElsterCHonerkampJWeeseJ. Using regularization methods for the determination of relaxation and retardation spectra of polymeric liquids. Rheol Acta1991; 30: 161–174.
78.
HonerkampJWeeseJA. A nonlinear regularization method for the calculation of relaxation spectra. Rheol Acta1993; 32: 65–73.
79.
GramespacherHMeissnerJ. Interfacial tension between polymer melts measured by shear oscillations of their blends. J Rheol1992; 36: 1127–1141.
80.
GraeblingDMullerRPalierneJF. Linear viscoelastic behaviour of some incompatible polymer blends in the melt-Interpretation of data with a model of emulsion of viscoelastic liquids. Macromolecules1993; 26: 320–329.
81.
OosterlinkFMporsMLaunHM. Morphology developments of a polystyrene /polymethylmethacrylate blend during startup of uniaxial elongational flow. J Rheol2005; 49: 897–918.
