In this study, polycarbonate/acrylonitrile–butadiene–styrene (PC/ABS) and polyamide 6/PC/ABS (PA6/PC/ABS) blends were reprocessed (recycled) five times and the influences of multiple molding processes on the thermal, chemical, morphological, rheological, and mechanical properties of the recycled and virgin specimens were investigated. The impact strength, tensile properties (elastic modulus, strength, and strain at break), and flexural properties (modulus and strength) were measured to determine the mechanical properties of the blends. The rheology of the samples was evaluated via measuring the melt flow index (MFI). It was concluded that the chemical structures, melting temperatures, and thermal properties of both blends did not significantly change with recycling. From the mechanical tests, in general, it was found that increasing the number of recycling processes did not considerably alter the flexural properties and tensile strength of PC/ABS blends, but decreased their MFI and impact strength. On the other hand, the elastic modulus and tensile strength of PA6/PC/ABS decreased with the number of recycling processes, whereas MFI, flexural properties, and impact strength of the ternary blends improved.
TjongSCMengYZ. Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends. Eur Polym J2000; 36: 123−129.
2.
TanZYXuXFSunSLInfluence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition. Polym Eng Sci2006; 46: 1476−1484.
3.
ScaffaroRLa MantiaFP. Characterization of monopolymer blend of virgin and recycled polyamide 6. Polym Eng Sci2002; 42: 2412–2417.
4.
La MantiaFPCurtoDScaffaroR. Recycling of dry and wet polyamide 6. J Appl Polym Sci2002; 86: 1899–1903.
5.
Lozano-GonzálezMAJRodriguez-HernandezMATGonzalez-De Los SantosEAPhysical-mechanical properties and morphological study on nylon-6 recycling by injection molding. J Appl Polym Sci2000; 76: 851–858.
6.
MaspochMLFerrandoHEVelascoJI. Characterisation of filled and recycled PA6. Macromol Symp2003; 194: 295–303.
7.
SuK-HLinJ-HLinC-C. Influence of reprocessing on the mechanical properties and structure of polyamide 6. J Mater Process Technol2007; 192–193: 532–538.
8.
GoitisoloIEguiazábalJINazábalJ. Effects of reprocessing on the structure and properties of polyamide 6 nanocomposites. Polym Degrad Stab2008; 93: 1747–1752.
9.
CrespoJEParresFPeydroMAStudy of rheological, thermal, and mechanical behaviour of reprocessed polyamide 6. Polym Eng Sci2013; 53: 679–688.
10.
LiuZQCunhaAMYiX-SKey properties to understand the performance of polycarbonate reprocessed by injection molding. J Appl Polym Sci2000; 77: 1393–1400.
11.
PérezJMVilasJLLazaJMEffect of reprocessing and accelerated ageing on thermal and mechanical polycarbonate properties. J Mater Process Technol2010; 210: 727–733.
12.
PérezJMVilasJLLazaJMEffect of reprocessing and accelerated weathering on ABS properties. J Polym Environ2010; 18: 71–78.
13.
ChenS-CLiaoW-HHsiehM-WInfluence of recycled ABS added to virgin polymers on the physical, mechanical properties and molding characteristics. Polym-Plast Technol Eng2011; 50: 306–311.
14.
PeydroMAParresFCrespoJERecovery of recycled acrylonitrile-butadiene-styrene, through mixing with styrene-ethylene/butylene-styrene. J Mater Process Technol2013; 213: 1268–1283.
15.
WongACY. Polycarbonate effects on selected mechanical properties of polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) binary blending system. Polym-Plast Technol Eng2003; 42: 171–180.
16.
NigamINigamDMathurGN. Effect of rubber content of ABS on properties of PC/ABS blends. I. Rheological, mechanical, and thermal properties. Polym-Plast Technol Eng2005; 44: 815–832.
17.
FarzadfarAKhorasaniSN. Effect of EVA-g-MAH on mechanical properties of PC/ABS blends. Polym-Plast Technol Eng2012; 51: 1424−1426.
LiuXBertilssonH. Recycling of ABS and ABS/PC blends. J Appl Polym Sci1999; 74: 510–515.
20.
BalartRLópezJGarcíaDRecycling of ABS and PC from electrical and electronic waste. Effect of miscibility and previous degradation on final performance of industrial blends. Eur Polym J2005; 41: 2150–2160.
21.
FarzadfarAKhorasaniSNKhaliliS. Blends of recycled polycarbonate and acrylonitrile-butadiene-styrene: comparing the effect of reactive compatibilizers on mechanical and morphological properties. Polym Int2014; 63: 145–150.
22.
BarthesM-LMantauxOPedrosMRecycling of aged ABS from real WEEE through ABS/PC blends in the ABS-rich compositions. Adv Polym Technol2012; 31: 343–353.
23.
MahantaDDayanidhiSAMohantySMechanical, thermal, and morphological properties of recycled polycarbonate/recycled poly(acrylonitrile-butadiene-styrene) blend nanocomposites. Polym Compos2012; 33: 2114–2124.
24.
ISO 527:1997. Plastics—determination of tensile properties.
25.
ISO 180:2000(E). Plastics—determination of izod impact strength.
26.
ISO 178:2010(E). Plastics—determination of flexural properties.
27.
ISO 1133:2005(E). Plastics—determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.
KuramETasciEAltanAIInvestigating the effects of recycling number and injection parameters on the mechanical properties of glass-fibre reinforced nylon 6 using Taguchi method. Mater Des2013; 49: 139–150.
30.
KuramEOzcelikBYilmazFThe effect of recycling number on the mechanical, chemical, thermal, and rheological properties of PBT/PC/ABS ternary blends: with and without glass-fiber. Polym Compos2014; 35: 2074–2084.
31.
KuramESahinZMOzcelikBRecyclability of polyethylene/polypropylene binary blends and enhancement of their mechanical properties by reinforcement with glass-fiber. Polym-Plast Technol Eng2014; 53: 1035–1046.
32.
ZhanhaiYZhihuiYJinghuaY. The effect of compatibilizer on morphology and mechanical properties of PA6/UHMWPE blends. Intern J Polymeric Mater2000; 46: 271–283.
33.
MantauxOLorriotTChibalonLRecycling study of end of life products made of ABS resin. J Mater Sci Technol2004; 20: 125–128.
34.
KuramETimurGOzcelikBInfluences of injection conditions on strength properties of recycled and virgin PBT/PC/ABS. Mater Manuf Process2014; 29: 1260–1268.
35.
KuramEOzcelikBYilmazF. The influence of recycling number on the mechanical, chemical, thermal and rheological properties of PBT/PC binary blend and glass-fibre reinforced PBT/PC composite. J Thermoplast Compos Mater. Epub ahead of print 1 February 2015. DOI: 10.1177/0892705715569823.
36.
KadamPGMhaskeST. Effect of extrusion reprocessing on the mechanical, thermal, rheological and morphological properties of nylon 6/talc nanocomposites. J Thermoplast Compos Mater. Epub ahead of print 22 September 2014. DOI: 10.1177/0892705714551591.
37.
LimSRAriffZMChowWS. Reprocessability of poly(ethylene terephthalate) nanocomposites: effects of maleic anhydride grafted styrene-ethylene/butylene-styrene and N, N′-ethylenebis(stearamide). J Thermoplast Compos Mater. Epub ahead of print 18 January 2013. DOI: 10.1177/0892705712470257.
38.
SamakrutNKrailasSRimdusitS. Characterization of short glass fiber-reinforced PC/ABS blends. J Met Mater Miner2008; 18: 207–211.
39.
BellemareSCBureauMNDenaultJFatigue crack initiation and propagation in polyamide-6 and in polyamide-6 nanocomposites. Polym Compos2004; 25: 433–441.
40.
ScaffaroRBottaLDi BenedettoG. Physical properties of virgin-recycled ABS blends: effect of post-consumer content and of reprocessing cycles. Eur Polym J2012; 48: 637–648.
41.
SanjaniNSAlipourANikfarjamN. Study of morphology and physical-mechanical properties of HDPE/PA6 and HDPE-g-MAH/PA6 nanocomposites with two types of 30B and 15A nanoparticles prepared via melt compounding. Polym-Plast Technol Eng2013; 52: 1343–1352.
42.
WangKAddiegoFBahlouliNAnalysis of thermomechanical reprocessing effects on polypropylene/ethylene octane copolymer blends. Polym Degrad Stab2012; 97: 1475–1484.
43.
FilipponeGDintchevaNTAciernoDThe role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends. Polymer2008; 49: 1312–1322.
44.
ChowWSIshakZAMIshiakuUSThe effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites. J Appl Polym Sci2004; 91: 175–189.
45.
BernardoCACunhaAMOliveiraMJ. The recycling of thermoplastics: prediction of the properties of mixtures of virgin and reprocessed polyolefins. Polym Eng Sci1996; 36: 511–519.
46.
KuramESaracLOzcelikBMechanical, chemical, thermal, and rheological properties of recycled PA6/ABS binary and PA6/PA66/ABS ternary blends. J Appl Polym Sci2014; 131: 9603–9610.
