The article describes the preparation of new cotton materials obtained by chemical deposition of copper sulfide. This two-stage process consists of chelation of copper sulfate on cellulose chains of cotton (COT → COT-CuSO4) with subsequent precipitation of copper in the form of copper sulfide (COT-CuSO4 → COT-CuS) using sodium sulfide. The obtained COT-CuS composites were characterized physicobiologically. Thus, the structural characteristic of the Cotton-CuS material was determined by microscopy analysis (SEM), Atomic Absorption Spectrometry with Flame Excitation (FAAS), specific surface area and total pore volume analysis (BET). The copper functionalized cotton fabric was subjected to microbial activity tests against colonies of Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria and Chaetomium globosum, Aspergillus niger fungal molds species. Biochemical evaluation includes hematological tests of activated partial thromboplastin time (aPTT) and prothrombin time (PT). The substantial antimicrobial properties of the newly synthesized COT-CuS material with the lack of influence on blood coagulation processes offer prospects of a potential use as applications as an antibacterial/antifungal material.
QianJDongQChunK, et al.
Highly stable, antiviral, antibacterial cotton textiles via molecular engineering. Nat Nanotechnol2023;
18: 168–176.
3.
BorkowGGabbayJ.Biocidal textiles can help fight nosocomial infections. Medical Hypotheses2008;
70: 990–994.
4.
PuvvadaRUWoodingJPBellaviaMC, et al.
Bacterial Growth and Death on Cotton Fabrics Conformally Coated with ZnO Thin Films of Varying Thicknesses via Atomic Layer Deposition (ALD). JOM2019;
71: 178–184.
5.
MitchellASpencerMEdmistonC.Role of healthcare apparel and other healthcare textiles in the transmission of pathogens: a review of the literature. Journal of Hospital Infection2015;
90: 285–292.
6.
HalepotoHGongTMemonH.A Bibliometric Analysis of Antibacterial Textiles. Sustainability2022;
14: 11424.
7.
XuQGuJZhaoY, et al.
Antibacterial cotton fabric with enhanced durability prepared using L-cysteine and silver nanoparticles. Fibers Polym2017;
18: 2204–2211.
8.
PerelshteinIApplerotGPerkasN, et al.
CuO–cotton nanocomposite: Formation, morphology, and antibacterial activity. Surface and Coatings Technology2009;
204: 54–57.
9.
DhivyaSPadmaVVSanthiniE.Wound dressings - a review. Biomedicine (Taipei)2015;
5: 22.
10.
Rezvani GhomiEKhaliliSNouri KhorasaniS, et al.
Wound dressings: Current advances and future directions. Journal of Applied Polymer Science2019;
136: 47738.
11.
NethiSKDasSPatraCR, et al.
Recent advances in inorganic nanomaterials for wound-healing applications. Biomater Sci2019;
7: 2652–2674.
12.
GuoBDongRLiangY, et al.
Haemostatic materials for wound healing applications. Nat Rev Chem2021;
5: 773–791.
13.
GuoYWangMLiuQ, et al.
Recent advances in the medical applications of hemostatic materials. Theranostics2023;
13: 161–196.
14.
MirhajMLabbafSTavakoliM, et al. An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings. Macromolecular Bioscience2022;
22: 2200014.
15.
PinhoESoaresG.Functionalization of cotton cellulose for improved wound healing. J Mater Chem B2018;
6: 1887–1898.
16.
ZengRLinCLinZ, et al.
Approaches to cutaneous wound healing: basics and future directions. Cell Tissue Res2018;
374: 217–232.
17.
GranadosAPleixatsRVallriberaA.Recent Advances on Antimicrobial and Anti-Inflammatory Cotton Fabrics Containing Nanostructures. Molecules2021;
26: 3008.
18.
OngaroraBG.Recent technological advances in the management of chronic wounds: A literature review. Health Sci Rep2022;
5: e641.
19.
Shahriari-KhalajiMAlassodANozhatZ.Cotton-based health care textile: a mini review. Polym Bull2022;
79: 10409–10432.
20.
XiaoY-QKanC-W.Review on the Development and Application of Directional Water Transport Textile Materials. Coatings2022;
12: 301.
21.
KopańskaABrzezińskiMDraczyńskiZ.Combination of polylactide with cellulose for biomedical applications: a recent overview. Cellulose2024;
31: 101–145.
22.
EdlichRFRodeheaverGTThackerJG, et al.
Revolutionary Advances in the Management of Traumatic Wounds in the Emergency Department During the Last 40 Years: Part I. The Journal of Emergency Medicine2010;
38: 40–50.
23.
SweeneyIRMiraftabMCollyerG.A critical review of modern and emerging absorbent dressings used to treat exuding wounds. International Wound Journal2012;
9: 601–612.
24.
CaoHCobbKYatvitskiyM, et al.
Textile and Product Development from End-of-Use Cotton Apparel: A Study to Reclaim Value from Waste. Sustainability2022;
14: 8553.
25.
SindhuKAPrasanthRThakurVK. Medical Applications of Cellulose and its Derivatives: Present and Future. In: Nanocellulose Polymer Nanocomposites. John Wiley & Sons, Ltd, pp. 437–477.
26.
KlemmDHeubleinBFinkH-P, et al.
Cellulose: Fascinating Biopolymer and Sustainable Raw Material. Angewandte Chemie International Edition2005;
44: 3358–3393.
27.
RojasOJ (ed). Cellulose Chemistry and Properties: Fibers, Nanocelluloses and Advanced Materials. 271. Epub ahead of print 2016. DOI: 10.1007/978-3-319-26015-0.
28.
FangDD (ed). Cotton Fiber: Physics, Chemistry and Biology. Epub ahead of print 2018. DOI: 10.1007/978-3-030-00871-0.
29.
Alemu RetaBBabuKMTesfayeT.Studies on Healthcare and Hygiene Textile Materials Treated With Natural Antimicrobial Bioactive Agents Derived From Plant Extracts. AATCC Journal of Research2024;
11: 73–89.
30.
Hosseini RavandiSAValizadehM.2 – Properties of fibers and fabrics that contribute to human comfort. In: SongG (ed) Improving Comfort in Clothing.
Woodhead Publishing, pp. 61–78.
31.
SandersDGrundenADunnRR.A review of clothing microbiology: the history of clothing and the role of microbes in textiles. Biology Letters2021;
17: 20200700.
32.
Mahbubul BasharMKhanMA.An Overview on Surface Modification of Cotton Fiber for Apparel Use. J Polym Environ2013;
21: 181–190.
33.
YangJWenXZhangX, et al.
A lipid coating on cotton fibers with enhanced adsorption capability for fabric functionalization. Cellulose2021;
28: 5957–5971.
34.
ZhuCWuJYanJ, et al.
Advanced Fiber Materials for Wearable Electronics. Adv Fiber Mater2023;
5: 12–35.
35.
HuSWangDKřemenákováD, et al. Characterization and Multifunction Application of Metalized Textile Materials. In: MilitkýJVenkataramanM (eds) Advanced Multifunctional Materials from Fibrous Structures.
Singapore:
Springer Nature, pp. 131–161.
36.
GhardeSKandasubramanianB.The Importance of Electroless Metallic Build-Up on Surface Modified Substrates for Multifunctional Engineering Applications: A Recent Progress Update. Trans Indian Inst Met2018;
71: 2873–2892.
37.
SzczyglewskaPFeliczak-GuzikANowakI.Nanotechnology–General Aspects: A Chemical Reduction Approach to the Synthesis of Nanoparticles. Molecules2023;
28: 4932.
38.
MullaRRabinalMHK.Copper Sulfides: Earth-Abundant and Low-Cost Thermoelectric Materials. Energy Technology2019;
7: 1800850.
39.
MajumdarD.Recent progress in copper sulfide based nanomaterials for high energy supercapacitor applications. Journal of Electroanalytical Chemistry2021;
880: 114825.
40.
BuckinghamMAWard-O’BrienBXiaoW, et al.
High entropy metal chalcogenides: synthesis, properties, applications and future directions. Chem Commun2022;
58: 8025–8037.
41.
AliNHussainAAhmedR, et al.
Advances in nanostructured thin film materials for solar cell applications. Renewable and Sustainable Energy Reviews2016;
59: 726–737.
42.
MeyerELMbeseJZAgoroMA.The Frontiers of Nanomaterials (SnS, PbS and CuS) for Dye-Sensitized Solar Cell Applications: An Exciting New Infrared Material. Molecules2019;
24: 4223.
43.
ToeCYZhouSGunawanM, et al.
Recent advances and the design criteria of metal sulfide photocathodes and photoanodes for photoelectrocatalysis. J Mater Chem A2021;
9: 20277–20319.
44.
KumarMMeenaBSubramanyamP, et al.
Emerging Copper-Based Semiconducting Materials for Photocathodic Applications in Solar Driven Water Splitting. Catalysts2022;
12: 1198.
45.
SudhaikARaizadaPRangabhashiyamS, et al.
Copper sulfides based photocatalysts for degradation of environmental pollution hazards: A review on the recent catalyst design concepts and future perspectives. Surfaces and Interfaces2022;
33: 102182.
46.
RegulacioMDWangYSehZW, et al.
Tailoring Porosity in Copper-Based Multinary Sulfide Nanostructures for Energy, Biomedical, Catalytic, and Sensing Applications. ACS Appl Nano Mater2018;
1: 3042–3062.
47.
HuynhT-P.Chemical and biological sensing with nanocomposites prepared from nanostructured copper sulfides. Nano Futures2020;
4: 032001.
48.
RenYYanBLinC, et al.
Multifunctional Textile Constructed via Polyaniline-Mediated Copper Sulfide Nanoparticle Growth for Rapid Photothermal Antibacterial and Antioxidation Applications. ACS Appl Nano Mater2023;
6: 1212–1223.
49.
ShamraizUHussainRABadshahA.Fabrication and applications of copper sulfide (CuS) nanostructures. Journal of Solid State Chemistry2016;
238: 25–40.
50.
XuLZhangXShenY, et al.
Durable Superhydrophobic Cotton Textiles with Ultraviolet-blocking Property and Photocatalysis Based on Flower-Like Copper Sulfide. Ind Eng Chem Res2018;
57: 6714–6725.
51.
NunesBCagideFFernandesC, et al.
Efficacy of Novel Quaternary Ammonium and Phosphonium Salts Differing in Cation Type and Alkyl Chain Length against Antibiotic-Resistant Staphylococcus aureus. International Journal of Molecular Sciences2024;
25: 504.
52.
DanWGaoJQiX, et al.
Antibacterial quaternary ammonium agents: Chemical diversity and biological mechanism. European Journal of Medicinal Chemistry2022;
243: 114765.
53.
WangYWangWLiuB, et al.
Preparation of durable antibacterial and electrically conductive polyacrylonitrile fibers by copper sulfide coating. Journal of Applied Polymer Science2017;
134: 45496.
54.
EN ISO 20645:2006; Textile Fabrics. Determination of Antibacterial Activity—Agar Diffusion Plate Test. International Organization for Standardization: Geneva, Switzerland, 2006.
55.
EN 14119: 2005 point 10.5 (B2); Testing of Textiles. Evaluation of the Action of Microfungi. Visual Method. International Organization for Standardization: Geneva, Switzerland, 2005.
56.
PN-EN ISO 13758-1+A1:2007; Textiles – Protective properties against UV radiation – Part 1: Test method for flat textile products: Geneva, Switzerland, 2007.
57.
PN-EN ISO 105-C06:2010; Textiles -Tests for color fastness - Part C06: Color fastness to domestic and commercial laundering: Geneva, Switzerland, 2010.
58.
LewinskiNColvinVDrezekR.Cytotoxicity of Nanoparticles. Small2008;
4: 26–49.
59.
KibriaGReponMdRHossainMdF, et al.
UV-blocking cotton fabric design for comfortable summer wears: factors, durability and nanomaterials. Cellulose2022;
29: 7555–7585.
60.
LourisESfiroeraEPriniotakisG, et al.
Evaluating the ultraviolet protection factor (UPF) of various knit fabric structures. IOP Conf Ser: Mater Sci Eng2018;
459: 012051.
61.
GambichlerTAltmeyerPHoffmannK.Comparison of Methods: Determination of UV Protection of Clothing. In: DummerRNestleFOBurgG (eds) Cancers of the Skin.
Berlin, Heidelberg:
Springer, 2002, pp. 55–61.
62.
GrifoniDBacciLZipoliG, et al.
Laboratory and Outdoor Assessment of UV Protection Offered by Flax and Hemp Fabrics Dyed with Natural Dyes. Photochemistry and Photobiology2009;
85: 313–320.
63.
RiddelJPAouizeratBEMiaskowskiC, et al.
Theories of blood coagulation. J Pediatr Oncol Nurs2007;
24: 123–131.
64.
SmithSATraversRJMorrisseyJH.How it all starts: initiation of the clotting cascade. Crit Rev Biochem Mol Biol2015;
50: 326–336.
65.
PaltaSSaroaRPaltaA.Overview of the coagulation system. Indian J Anaesth2014;
58: 515–523.
RamananSVRajanandRajanS.The Coagulation Cascade. In: PrabhakarHS TandonMKapoorI, et al. (eds) Transfusion Practice in Clinical Neurosciences.
Singapore:
Springer Nature, pp. 257–264.
68.
MussbacherMKral-PointnerJBSalzmannM, et al. Mechanisms of Hemostasis: Contributions of Platelets, Coagulation Factors, and the Vessel Wall. In: GeigerM (ed) Fundamentals of Vascular Biology.
Cham:
Springer International Publishing, pp. 145–169.
69.
WhiteGC.The partial thromboplastin time: defining an era in coagulation. Journal of Thrombosis and Haemostasis2003;
1: 2267–2270.
70.
ReddyNMHallSWMacKintoshFR.Partial Thromboplastin Time: Prediction of Adverse Events and Poor Prognosis by Low Abnormal Values. Archives of Internal Medicine1999;
159: 2706–2710.
71.
RoshalMReyes GilM.Chapter 129 – Activated Partial Thromboplastin Time. In: ShazBHHillyerCDReyes GilM (eds) Transfusion Medicine and Hemostasis (Third Edition).
Elsevier, pp. 779–781.
72.
ZimringJC.Chapter 113 – Prothrombin Time and Activated Partial Thromboplastin Time. In: HillyerCDShazBHZimringJC, et al. (eds) Transfusion Medicine and Hemostasis.
San Diego:
Academic Press, pp. 607–610.
73.
LevyJHSzlamFWolbergAS, et al.
Clinical Use of the Activated Partial Thromboplastin Time and Prothrombin Time for Screening: A Review of the Literature and Current Guidelines for Testing. Clinics in Laboratory Medicine2014;
34: 453–477.
74.
CroweEPGoelRNessPM.Prothrombin and Partial Thromboplastin Time. In: MooreHBNealMDMooreEE (eds) Trauma Induced Coagulopathy.
Cham:
Springer International Publishing, pp. 265–270.
75.
MrozińskaZPonczekMKaczmarekA, et al.
Blood Coagulation Activities of Cotton–Alginate–Copper Composites. Marine Drugs2023;
21: 625.
76.
MrozińskaZKudzinMHPonczekMB, et al.
Biochemical Approach to Poly(Lactide)–Copper Composite—Impact on Blood Coagulation Processes. Materials2024;
17: 608.
77.
MathewsSHansMMücklichF, et al.
Contact Killing of Bacteria on Copper Is Suppressed if Bacterial-Metal Contact Is Prevented and Is Induced on Iron by Copper Ions. Applied and Environmental Microbiology2013;
79: 2605–2611.
78.
ThommesMKanekoKNeimarkAV, et al.
Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure and Applied Chemistry2015;
87: 1051–1069.
79.
QiLTangXWangZ, et al.
Pore characterization of different types of coal from coal and gas outburst disaster sites using low temperature nitrogen adsorption approach. International Journal of Mining Science and Technology2017;
27: 371–377.
80.
XuLZhangJDingJ, et al.
Pore Structure and Fractal Characteristics of Different Shale Lithofacies in the Dalong Formation in the Western Area of the Lower Yangtze Platform. Minerals2020;
10: 72.
81.
SingKSW.Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984). Pure and Applied Chemistry1985;
57: 603–619.
82.
ALOthmanZA.A Review: Fundamental Aspects of Silicate Mesoporous Materials. Materials2012;
5: 2874–2902.
83.
LowellSShieldsJEThomasMA, et al. Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density.
Springer Science & Business Media, 2012.
84.
GreggSJSingKSWSalzbergHW.Adsorption Surface Area and Porosity. J Electrochem Soc1967;
114: 279Ca.
85.
MedranoVGBCelisVNGiraldoRI. Systematic analysis of the nitrogen adsorption-desorption isotherms recorded for a series of microporous – mesoporous amorphous aluminosilicates using classical methods. Epub ahead of print 13 June 2022. DOI: 10.26434/chemrxiv-2022-8v4h3.
