The three-dimensional braided composite multi-way tube is one kind of high strength joint with a unique seamless braided microstructure. Here we report a new method to prepare the three-way integrated braided preform. Quasi-static axial compressive damages and strengths of the three-way braided composite tubes were tested for revealing the effects of braided structure on the compressive behaviors. We have paid more attention to braiding yarn strain distribution at the connection region and have found the braided yarns are in a uniform braided structure in this region. Compressive strength and initial stiffness can be improved by reducing branch length or increasing braiding layers. The surface strain on the branch tube shows obvious periodicity related to the braided structure while that on the connection region is affected by the bulging movement due to the compression of the three branch tubes. The main damage mechanisms are yarn breakage, yarn debonding, and kink band. This uniform braided structure paves the way to form the seamless braided structure among three branch tubes with high compressive strength.
TraskRSHallettSRHelenonFMM, et al.
Influence of process induced defects on the failure of composite T-joint specimens. Compos Part A-Appl S2012;
43: 748–757.
2.
CamanhoPPLambertM.A design methodology for mechanically fastened joints in laminated composite materials. Compos Sci Technol2006;
66: 3004–3020.
3.
LiZJiangXLodewijksG.The latest development of reinforcement techniques on tubular joints. Progress in the analysis and design of marine structures. CRC Press, Florida: Taylor & Francis publisher, 2017, pp.783–790.
4.
BaneaMDda SilvaLFM.Adhesively bonded joints in composite materials: An overview. P I Mech Eng L-J Mat2009;
223: 1–18.
5.
HoonK-HWongL-KSohA-K.Experimental investigation of a doubler-plate reinforced tubular T-joint subjected to combined loadings. J Constr Steel Res2001;
57: 1015–1039.
6.
ChooYVan der VegteGZettlemoyerN, et al.
Static strength of T-joints reinforced with doubler or collar plates. I: Experimental investigations. J Struct Eng2005;
131: 119–128.
7.
Van der VegteGJChooYSLiangJX, et al.
Static strength of T-Joints reinforced with doubler or collar plates. II: Numerical simulations. J Struct Eng2005;
131: 129–138.
8.
LeongKHRamakrishnaSHuangZ, et al.
The potential of knitting for engineering composites—a review. Compos Part A-Appl S2000;
31: 197–220.
9.
YanSZengXLongA.Experimental assessment of the mechanical behaviour of 3D woven composite T-joints. Compos Part B-Eng2018;
154: 108–113.
10.
HuysmansGVerpoestIVan HoutteP.A damage model for knitted fabric composites. Compos Part A-Appl S2001;
32: 1465–1475.
11.
SchindlerSBauderH-JWolfrumJ, et al.
Engineering of three-dimensional near-net-shape weave structures for high technical performance in carbon fibre-reinforced plastics. J Eng Fiber Fabr2019; 14.
12.
WuZDingHYingZ, et al.
Influence of braided fabric on the fracture modes of a composite tube under quasi-static compression. J Reinf Plast Comp2017;
36: 766–779.
13.
GideonRKSunBGuB.Mechanical behaviors of four-step 1 × 1 braided carbon/epoxy three-dimensional composite tubes under axial compression loading. Polym Composite2016;
37: 3210–3218.
14.
YangYQAhmedKZhangRY, et al.
A study on the energy absorption capacity of braided rod composites. Compos Struct2018;
206: 933–940.
15.
ChenGLiJ. Design and manufacture of three dimensional integrated braided composite tube with flange. Applied Mechanics and Materials 2010; 34: 1393–1396.
16.
Lu H, Sun Y, Jiao Yet al.
Near net-shaped design on the architecture of typical multi-directional 2.5D woven preform. Acta Mater Compos Sin2021;
38: 3109–3117.
17.
UozumiTKitoA.Carbon fibre-reinforced plastic truss structures for satellite using braiding/resin transfer moulding process. P I Mech Eng L-J Mat2007;
221: 93–101.
18.
HongYYanYTianZ, et al.
Mechanical behavior analysis of 3D braided composite joint via experiment and multiscale finite element method. Compos Struct2019;
208: 200–212.
19.
TianZYanYHongY, et al.
Improved genetic algorithm for optimization design of a three-dimensional braided composite joint. Compos Struct2018;
206: 668–680.
20.
WuYNanBChenL.Mechanical performance and parameter sensitivity analysis of 3D braided composites joints. Sci World J2014; 2014: 476262.
21.
BilisikK.Three-dimensional braiding for composites: A review. Text Res J2013;
83: 1414–1436.
StockSR.Recent advances in X-ray microtomography applied to materials. Inter Mater Rev2008;
53: 129–181.
24.
YaJLiuZWangY.Micro-CT characterization on the meso-structure of three-dimensional full five-directional braided composite. Appl Compos Mater2017;
24: 593–610.
25.
HuangWCaussePBrailovskiV, et al.
Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling. Composites Part a-Applied Science and Manufacturing2019;
124.
26.
ZhaoG, YuXZengQ, et al.
Evolution of local deformation field inside adiabatic shear band of 1018 steel studied using digital image correlation with micro-speckles. Extreme Mechanics Letters2022;
54: 101769.
27.
VrgocATomicevicZSmaniottoB, et al.
Application of different imaging techniques for the characterization of damage in fiber reinforced polymer. Compos Part A-Appl S2021;
150: 106576.
28.
PourAFNguyenGDVincentT, et al.
Investigation of the compressive behavior and failure modes of unconfined and FRP-confined concrete using digital image correlation. Compos Struct2020;
252: 112642.
29.
ZhouHHuDGuB, et al.
Transverse impact performance and finite element analysis of three dimensional braided composite tubes with different braiding layers. Compos Struct2017;
168: 345–359.
30.
FengRChenYChenD.Experimental and numerical investigations on collar plate and doubler plate reinforced SHS T-joints under axial compression. Thin Wall Struct2017;
110: 75–87.
31.
ZhouHLPanZXGideonRK, et al.
Experimental and numerical investigation of the transverse impact damage and deformation of 3-D circular braided composite tubes from meso-structure approach. Compos Part B-Eng2016;
86: 243–253.
