A finite element model is created from realistic microstructural data in order to predict the mechanical properties of two-dimensional tri-axially braided textile composites (2DTBCs), specifically with a focus on the prediction of their compressive strength. The virtually manufactured model is based on information about the realistic geometry of the textile architecture and nonlinear material properties of fiber tows and matrix. A parametric representative unit cell model is developed in a fully three-dimensional setting for the construction of representative textile architectures. The computational model is utilized to predict the compressive strength of 2DTBCs.
NaikNKShembekarPS. Elastic behavior of woven fabric composites: I - lamina analysis. J Compos Mater1992; 26: 2196–2225.
4.
QuekSCWaasAMShahwanKWet al.Analysis of 2D triaxial flat braided textile composites. Int J Mech Sci2003; 45: 1077–1096.
5.
OdegardGSearlesKKumosaM. Nonlinear analysis of woven fabric-reinforced graphite/PMR-15 composites under shear-dominated biaxial loads. Mech Compos Mater Struct2000; 7: 129–152.
6.
SearlesKOdegardGKumosaM. Micro- and mesomechanics of 8-harness satin woven fabric composites: I - evaluation of elastic behavior. Composites Part A2001; 32: 1627–1655.
7.
ChouTW. Microstructural design of fiber composites, Cambridge: Cambridge University Press, 1992.
8.
SongSWaasAMShahwanKWet al.Braided textile composites under compressive loads: Modeling the response, strength and degradation. Compos Sci Technol2007; 67: 3059–3070.
9.
SongSWaasAMShahwanKWet al.Compression response of 2D braided textile composites: Single cell and multiple cell micromechanics based strength predictions. J Compos Mater2008; 42: 2461–2482.
10.
DaggumatiSDe BaereIVan PaepegemWet al.Local damage in a 5-harness satin weave composite under static tension: part I - experimental analysis. Compos Sci Technol2010; 70: 1926–1933.
11.
DaggumatiSDe BaereIVan PaepegemWet al.Local damage in a 5-harness satin weave composite under static tension: part II – mesh-FE modeling. Compos Sci Technol2010; 70: 1926–1933.
12.
Chamis CC. Mechanics of composite materials past, present, and future. NASA technical memorandum. NASA-TM-100793, 1984.
13.
MelroARCamanhoPPPiresFMAet al.Numerical simulation of the non-linear deformation of 5-harness satin weaves. Comput Mater Sci2012; 61: 116–126.
IvanovDSBaudryFVan Den BrouckeBet al.Failure analysis of triaxial braided composite. Compos Sci Technol2009; 69: 1372–1380.
16.
LadevezePLubineauG. An enhanced mesomodel for laminates based on micromechanics. Compos Sci Technol2002; 62: 533–541.
17.
SongSWaasAMShahwanKWet al.Compression response, strength and post-peak response of an axial fiber reinforced tow. Int J Mech Sci2009; 51: 491–499.
18.
SongSWaasAMShahwanKWet al.Effects of matrix microcracking on the response of 2D braided textile composites subjected to compression loads. J Compos Mater2010; 44: 221–240.
19.
KierZTSalviATheisGet al.Estimating mechanical properties of 2D triaxially braided textile composites based on microstructure properties. Composites Part B2015; 68: 288–299.
20.
NgWHSalviAWaasAM. Characterization of the in-Situ nonlinear shear response of laminated fiber-reinforced composites. Compos Sci Technol2010; 70: 1126–1134.
21.
YerramalliCSWaasAM. In-situ matrix shear response using torsional test data of fiber reinforced unidirectional polymer composites. Trans ASME J Eng Mater Technol2002; 124: 152–159.
22.
Dassault System. SIMULIA Abaqus, 2010.
23.
ArboczJHolJMAM. Koiter’s stability theory in a computer-aided engineering (CAE) environment. Int J Solids Struct1990; 26: 945–973.
24.
RiksE. An incremental approach to the solution of buckling and snapping problems. Int J Solids Struct1979; 15: 524–551.
