Brush-painting and photonical sintering of copper and silver inks on cotton fabric to form antennas for wearable ultra-high-frequency radio-frequency identification tags
Restricted accessResearch articleFirst published online September, 2016
Brush-painting and photonical sintering of copper and silver inks on cotton fabric to form antennas for wearable ultra-high-frequency radio-frequency identification tags
Additive deposition of inks with metallic inclusions provides compelling means to embed electronics into clothing in a seamless way. We present a simple single-step brush-painting method for depositing copper and silver inks directly on ordinary cotton fabric and discuss the optimization of the photonical sintering of both materials. For the first time, we demonstrate the deposition and sintering of copper oxide ink on fabric achieving high electrical conductivity suitable for radio-frequency electronics. The results from wireless testing confirmed that the radio-frequency identification tags based on the copper and silver ink antennas were readable from 6 and 10 m, respectively.
YooHJ. Your heart on your sleeve: advances in textile-based electronics are weaving computers right into the clothes we wear. IEEE Solid State Circuits Mag2013; 5: 59–70.
2.
SwanM. Sensor mania! The internet of things, wearable computing, objective metrics, and the quantified self 2.0. J Sensor Actuator Netw2012; 3: 217–253.
3.
SaniARajabMFosterR. Antennas and propagation of implanted RFIDs for pervasive healthcare applications. Proc IEEE2010; 98: 1648–1655.
4.
MarroccoG. Pervasive electromagnetics: sensing paradigms by passive RFID technology. IEEE Wireless Commun2010; 17: 10–17.
5.
StockmanH. Communication by means of reflected power. Proc IRE1948; 36: 1196–1204.
6.
KoelleARDeppSWFreymanRW. Short-range radio-telemetry for electronic identification, using modulated RF backscatter. Proc IEEE1975; 63: 1260–1261.
7.
LandtJ. The history of RFID. IEEE Potentials2005; 24: 8–11.
WantA. An introduction to RFID technology. IEEE Pervasive Comput2006; 5: 25–33.
10.
DobkinD. The RF in RFID: Passive UHF RFID in practice, Oxford: Newnes-Elsevier, 2008.
11.
ISO/IEC 18000-6. Information technology – Radio frequency identification for item management – Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General http://www.iso.org/ (2010, accessed 25 January 2014).
MarroccoG. The art of UHF RFID antenna design: impedance-matching and size-reduction techniques. IEEE Antennas Propag Mag2008; 50: 66–79.
14.
PerretETedjiniSNairRS. Design of antennas for UHF RFID tags. Proc IEEE2012; 100: 2330–2340.
15.
Long F, Zhang XD, Björninen T, et al. Implementation and wireless readout of passive UHF RFID strain sensor tags based on electro-textile antennas. In: European conference on antennas and propagation, Lisbon, Portugal, 12–17 April 2015.
16.
MoradiEKoskiKBjörninenT. Miniature implantable and wearable on-body antennas: towards the new era of wireless body-centric systems. IEEE Antennas Propag Mag2014; 56: 271–291.
17.
Catarinucci L, Colella R, De Donno D, et al. Fully-passive devices for RFID smart sensing. In: IEEE international symposium on antennas and propagation, Orlando, FL, USA, 7–13 July 2013, pp.2311–2312.
Salonen P and Hurme L. A novel fabric WLAN antenna for wearable applications. In: IEEE international symposium on antennas and propagation, Columbus, OH, USA, 22–27 June 2003, pp.700–703.
20.
LocherIKlemmMKirsteinT. Design and characterization of purely textile patch antennas. IEEE Trans Adv Packag2006; 29: 777–788.
21.
Matthews JCG and Pettitt G. Development of flexible, wearable antennas. In: European conference on antennas and propagation, Berlin, Germany, 23–27 March 2009, pp.273–277.
22.
ZhuSLangleyR. Dual-band wearable textile antenna on an EBG substrate. IEEE Trans Antennas Propag2009; 57: 926–933.
23.
KennedyTEFinkPWChuAW. Body-worn E-textile antennas: the good, the low-mass, and the conformal. IEEE Trans Antennas Propag2009; 57: 910–918.
24.
HertleerCRogierHVallozziL. A textile antenna for off-body communication integrated into protective clothing for firefighters. IEEE Trans Antennas Propag2009; 57: 919–925.
25.
RohJSChiYSLeeJH. Embroidered wearable multiresonant folded dipole antenna for FM reception. IEEE Antennas Wireless Propag Lett2010; 9: 803–806.
26.
CottetDGrzybJKirsteinT. Electrical characterization of textile transmission lines. IEEE Trans Adv Packag2003; 26: 182–190.
27.
LocherITrösterG. Screen-printed textile transmission lines. Text Res J2007; 77: 837–842.
28.
MerilampiSLaine-MaTRuuskanenP. The characterization of electrically conductive silver ink pattern on flexible substrates. Microelectron Reliab2009; 49: 782–790.
29.
MerilampiSBjörninenTHaukkaV. Analysis of electrically conductive silver ink on stretchable substrates under tensile load. Microelectron Reliab2010; 50: 2001–2011.
30.
OuyangYChappellWJ. High frequency properties of electro-textiles for wearable antenna applications. IEEE Trans Antennas Propag2008; 56: 381–389.
31.
Koski K, Moradi E, Vena A, et al. Characterization of electro-textiles using wireless reflectometry for optimization of wearable UHF RFID tags. In: progress in electromagnetics research symposium, Stockholm, Sweden, 12–15 August 2013, pp.1188–1192.
32.
TsolisAWhittowWG. Embroidery and related manufacturing techniques for wearable antennas: challenges and opportunities. Electronics2014; 3: 314–338.
33.
Yeonho K, Kyounghwan L, Yongju K, et al. Wearable UHF RFID tag antenna design using flexible electro-thread and textile. In: IEEE international symposium on antennas and propagation, Honolulu, HI, USA, 9–15 June 2007, pp.5487–5490.
34.
Choi JH, Yeonho K, Kyounghwan L, et al. Various wearable embroidery RFID tag antenna using electro-thread. In: IEEE international symposium on antennas and propagation, San Diego, CA, USA, 5–11 July 2008.
35.
Kim G, Lee J, Lee KH, et al. Design of a UHF RFID fiber tag antenna with electric-thread using a sewing machine. In: Asia-Pacific microwave conference, Macau, China, 16–20 December 2008.
36.
Farooqui MF and Shamim A. Dual band inkjet printed bow-tie slot antenna on leather. In: European conference on antennas and propagation, Gothenburg, Sweden, 8–12 April 2013, pp.3287–3290.
37.
LiljaJPynttäriVKaijaT. Body-Worn antennas making a splash: lifejacket-integrated antennas for global search and rescue satellite system. IEEE Trans Antennas Propag2013; 55: 324–341.
38.
ChaurayaAWhittowWGVardaxoglouJC. Inkjet printed dipole antennas on textiles for wearable communications. IET Microw Antennas Propag2013; 7: 760–767.
39.
WhittowWGChaurayaAVardaxoglouJC. Inkjet-printed microstrip patch antennas realized on textile for wearable applications. IEEE Antennas Propag Lett2014; 1: 71–74.
40.
Björninen T, Virkki J, et al. Possibilities of 3D direct write dispensing for textile UHF RFID tag manufacturing. In: IEEE antennas and propagation society international symposium, Vancouver, BC, Canada, 19–25 July 2015. To appear.
41.
LiljaJKaijaTDe MaagtP. Design and manufacturing of robust textile antennas for harsh environments. IEEE Trans Antennas Propag2012; 60: 4130–4140.
42.
VirkkiJBjörninenTMerilampiS. The effects of recurrent stretching on the performance of electro-textile and screen-printed ultra-high-frequency radio-frequency identification tags. Text Res J2015; 85: 294–301.
43.
QiangBLangleyR. Crumpling of PIFA textile antenna. IEEE Trans Antennas Propag2012; 60: 63–70.
44.
Kaufmann T, Fumeaux IM and Fumeaux C. Comparison of fabric and embroidered dipole antennas. In: European conference on antennas and propagation. Gothenburg, Sweden, 8–12 April 2013, pp.1662–1666.
45.
PaulGTorahRYangK. An investigation into the durability of screen-printed conductive tracks on textiles. Meas Sci Technol2014; 25: 11–11.
46.
HertleerCVan LeareARogierH. Influence of relative humidity on textile antenna performance. Text Res J2010; 80: 177–183.
47.
ToivonenMBjörninenT. Impact of moisture and washing on the performance of embroidered UHF RFID tags. IEEE Antennas Wireless Propag Lett2012; 12: 1590–1593.
48.
SalvadoRLossCGonçalvesR. Textile materials for the design of wearable antennas: a survey. Sensors2012; 12: 15841–15857.
49.
Kellomäki T, Virkki J, Merilampi S, et al. Towards washable wearable antennas: a comparison of coating materials for screen-printed textile-based UHF RFID tags. Int J Antennas Propag 2012; Article ID 476570.
50.
ScarpelloMLKazaniIHertleerC. Stability and efficiency of screen-printed wearable and washable antennas. IEEE Antennas Wireless Propag Lett2012; 11: 838–841.
KazaniIDelercqFScarpelloML. Performance study of screen-printed textile antennas after repeated washing. Autex Res J2014; 14: 47–54.
53.
YanFChanYMingY. Experimental study on the washing durability of electro-textile UHF RFID tags. IEEE Antennas Wireless Propag Lett2015; 14: 466–469.
54.
KazaniIHertleerCDe MeyG. Dry cleaning of electroconductive layers screen printed on flexible substrate. Text Res J2013; 83: 1541–1548.
55.
Virkki J, Björninen T, Sydänheimo L, et al. Brush-painted silver nanoparticle UHF RFID tags on fabric substrates. In: progress in electromagnetics research symposium, Guangzhou, China, 25–28 August 2014, pp. 2106–2110.
