In this study, the mechanical response of a single yarn pull-out from single layers of Kevlar® and Twaron® fabric under out-of-plane loading at both quasi-static and dynamic rates was experimentally investigated. In order to perform the dynamic experiments, a pendulum impact setup was designed and constructed to pull out a single yarn dynamically. The pull-out load was measured directly by a load cell and the movement of the fabric was measured to portray the load–displacement history. The effects of transverse pressure, different weave direction, and loading rates were also investigated.
CheesemanBABogettiTA. Ballistic impact into fabric and compliant composite laminates. Compos Struct2003; 61: 161–173.
2.
DuanY. A numerical investigation of the influence of friction on energy absorption by a high-strength fabric subjected to ballistic impact. Int J Impact Eng2006; 32: 1299–1312.
3.
RaoMP. Modeling the effects of yarn material properties and friction on the ballistic impact of a plain-weave fabric. Compos Struct2009; 89: 556–566.
4.
KirkwoodKM. Yarn pull-out as a mechanism for dissipating ballistic impact energy in Kevlar® KM-2 fabric, Part 1: Quasi-static characterization of yarn pull-out. Textil Res J2004; 77: 920–928.
5.
DongZManimalaJMSunCT. Mechanical behavior of silica nanoparticle-Impregnated Kevlar fabrics. J Mech Mater Struct2009; 5: 529–548.
6.
SebastianSARD. Extension, displacements and forces associated with pulling a single yarn from a fabric. J Phys D Appl Phys1987; 20: 130–139.
7.
KirkwoodKM. Yarn pull-out as a mechanism for dissipating ballistic impact energy in Kevlar® KM-2 fabric, Part II: Predicting ballistic performance. Textil Res J2004; 74: 939–948.
8.
GawandiAThostensonETGilllespieJWJr. Tow pullout behavior of polymer-coated Kevlar fabric. J Mater Sci2011; 46: 77–89.
9.
BazhenovS. Dissipation of energy by bulletproof aramid fabrics. J Mater Sci1997; 32: 4167–4173.
10.
RuinaAL. Friction laws and instabilities: A quasi-static analysis of some dry frictional behavior., Brown University, 1980. PhD Dissertation, Brown University, 1980.
CookRF. Stick-slip during fibre pull-out. Scripta Metalurgica1989; 23: 1725–1730.
13.
AdanurS. Handbook of weaving, Boca Raton, FL: CRC Press, 2001, pp. 363–364.
14.
LimJ. Effects of gage length, loading rates, and damage on the strength of PPTA fibers. Int J Impact Eng2011; 38: 219–227.
15.
BilisikKKorkmazM. Multilayered and multidirectionally-stitched aramid woven fabric structures: experimental characterization of ballistic performance by considering the yarn pull-out test. Textil Res J2010; 80: 1697–1720.
16.
KingMJ. A continuum constitutive model for the mechanical behavior of woven fabrics including slip and failure. Int J Solids Struct2006; 42: 3867–3873.
