Analysis of Geometrical Parameters using a CAD System for a 3-D Braided Preform

Abstract

To estimate the precise mechanical properties of the three-dimensional (3-D) braided composite, a geometric study of a 3-D braided preform was performed. Describing yarn paths using third-order spline curves, which are close to the real pathway of the 3-D braided structure, the unit cells and the representative volume elements were determined. Finally, the CAD system for the 3-D circular braided preform was developed following these modeling sequences and applied to the parametric study of the preforms. A parametric study was conducted on the important geometric factors such as yarn retraction factor, yarn orientation angle, and yarn volume fraction and the theoretical maximum yarn volume fraction was determined. Using the developed CAD system, the relationships between processing variables and geometric parameters have been established.

Keywords

3-D braided perform preform geometry CAD systems braid processing variables

Get full access to this article

View all access options for this article.

References

Ko, F.K. , Tensile Strength and Modulus of a Three Dimensional Braid, in "Proceedings of the 7th Conference on Composite Materials: Testing and Design, ASTM STP 893", Philadelphia, PA, U.S.A., 1986, pp. 392-403.

Ma, C.L. , Yang, J.M. , and Chou, T.W. , Elastic Stiffness of Three-dimensional Braided Textile Structural Composites , in "Proceedings of the 7th Conference on Composite Materials: Testing and Design, ASTM STP 893", PA, U.S.A., 1986 , pp. 404-421.

Li, W. , and El-Shiekh, A. , The Effect of Processes and Processing Parameters on 3-D Braided Preforms for Composites, SAMPE Quart. 19, 22-28 (1988).

Du, G.W. , and Ko, F.K. , Unit Cell Geometry of 3-D Braided Structure , J. Reinforced Plast. Comp., 12(7), 752-768 (1993).

Ko, F.K. , Soebroto, H.B. , and Lei, C. , 3-D Net Shaped Composites by the 2-Step Braiding Process, in "Proceedings of the 33rd International SAMPE Symposium and Exposition ", CA, U.S.A., 1988, pp. 912-921.

Pandey, R. , and Hahn, H.T. , Visualization of Representative Volume Elements for Three-Dimensional Four-step Braided Composites, Comp. Sci. Tech., 56(2), 161-170 (1996).

Chen, L. , Tao, X.M. , and Choy, C. .L., On the Microstructure of Three-dimensional Braided Preforms, Comp . Sci. Tech.., 59(3), 391-404 (1999).

Byun, J.H. , and Chou, T.W. , Process-Microstructure Relationships of 2-step and 4-Step Braided Composites, Comp. Sci. Tech., 56(3), 235-251 (1996).

Byun, J.H. , The Analytical Characterization of 2-D Braided Textile Composites, Com., Sci .Tech., 60(5), 705-716 (2000).

10.

Wang, Y. , and Sun, X. , Digital-element Simulation of Textile Processes, Comp. Sci. Tech., 61(2), 311-319 (2001).

11.

Brunnschweiler, D. , Braids and Braiding, J, Text, Inst., 44(9), 666-686 (1953).

12.

Lomov, S.V. , Parnas, R.S. , Bandyopadhyay Ghosh, S. , Verpoest, I. , and Nakai, A. , Experimental and Theoretical Characterization of the Geometry of Two-Dimensional Braided Fabrics , Text. Res. J., 72(8), 706-712 (2002).

13.

Hammad, M. , El-Messery, M. , and El-Shiekh, A. , Structural Mechanics of 3-D Braided Preforms for Composites. How Concept Becomes Reality, in "Proceedings of the 36th International SAMPE Symposium and Exposition", CA, U.S.A., 1991, pp. 114-128.