Prediction of Mechanical Properties of 3-D Braided Composite using CAD system

Abstract

The geometrical and mechanical properties of three-dimensionally braided glass/epoxy composite were investigated using the CAD system. The three-dimensional (3-D) yarn path was described using third order spline curves referring to our previous work about the circular braided preform. The CAD system for the flat plate-shaped composite was developed by modifying that for the circular preform. The 3-D braided glass/ epoxy composite was manufactured using the resin transfer molding (RTM) process and the tensile modulus in the axial as well as transverse directions were measured. The tensile modulus of the composite was predicted using the developed CAD system adopting the volume averaging method. The prediction exhibited good agreement with the experimental results. The effects of pitch length and the number of layers on the mechanical properties of braided composite were successfully estimated using the CAD system.

Keywords

3D braided composite braided composite preform geometry CAD systems

Get full access to this article

View all access options for this article.

References

Chou, T.W. and Ko, F.K. , "Textile Structural Composites," Elsevier Publishing Company, Amsterdam, 1989.

Bigaud, D. , Dreano, L. and Hamelin, P. Models of Interactions between Process, Microstructure and Mechanical Properties of Composite Materials - a Study of the Interlock Layer-to-Layer Braiding Technique, Comp. Struc., 67(1), 99-114 (2005)

Kostar, T.D. , Chou, T.W. and Popper, P. , Characterization and Comparative Study of Three-dimensional Braided Hybrid Composites, J. Mat. Sci. , 35, 2175-2183 (2000).

Chen, L. , Tao, X.M. , and Choy, C.L. , On the Microstructure of Three-dimensional Braided Preforms, Comp. Sci. Technol., 59(3), 391-404 (1999).

Kang, T.J. , Kim, S. , and Jung, K. , Analysis of Geometrical Properties using CAD System for 3-D Braided Preform" , Textile Research Journal, submitted (2007 ).

Ko, F.K. , Soebroto, H.B. , and Lei, C. , 3-D Net Shaped Composites by the 2-Step Braiding Process, 33rd International SAMPE Symposium and Exposition, March 7-10, Anaheim, CA, USA, 912-921 (1988).

Masters, J.E. , Foye, R.L. , Pastore, C.M. , and Gowayed, Y.A. , Mechanical Properties of Triaxially Braided Composites: Experimental and Analytical Result, J. Comp. Technol. Res., 15(2), 112-122 (1993).

Smith, L.V. and Swanson, S.R. , Response of Braided Composites Under Compressive Loading, J. Comp. Eng., 3(12), 1165-1184 (1993).

Byun, J.H. and Chou, TW , Process-Microstructure Relationships of 2-step and 4-Step Braided Composites, Comp. Sci.Technol., 56(3), 235-251 (1996).

10.

Byun, J.H. , The Analytical Characterization of 2-D Braided Textile Composites, Comp. Sci. Technol., 60(5), 705-716 (2000). ).

11.

Hashin, Z. , Rosen, B.W. , The Elastic Moduli of Fiber Reinforced Materials, J. Appl. Mech., 31, 223-242 (1964).