Resin–dentin bonding technology is the primary method for tooth restoration in clinical practice. However, the formation of a defect zone at the bonding interface due to inadequate moisture control at the interface remains a major challenge. Inspired by mussel wet-adhesion mechanisms, this study functionalized phosphoric acid etchants with catechol–lysine–methacrylate (CLM), a polymerizable small-molecule monomer. During dentin demineralization, catechol binding to demineralized dentin was confirmed using an incubation-rinsing technique, while lysine’s role in facilitating rapid water release at the bonding interface was validated by freeze-drying mass loss, surface charge distribution, and thermogravimetric analysis. Confocal laser scanning microscopy revealed increased resin tag lengths in the CLM-treated groups, indicating enhanced resin infiltration. Ultimate tensile strength, dry mass loss, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, and in situ zymography demonstrated catechol-enabled collagen stabilization via Schiff base/ester bonds and endogenous enzyme inhibition. Micro-tensile testing revealed that the 4- to 5-mg/mL CLM groups maintained bond strength after 10,000 thermal cycles. Thus, CLM-functionalized etchants may enhance bonding durability in vitro by improving moisture control and collagen stability.
AmranTMeierDAmatoJConnertTBlatzMBWeigerREggmannF.2023. Accuracy of selective enamel etching: a computer-assisted imaging analysis. Oper Dent. 48(5):538–545.
2.
BeniashETraubWVeisAWeinerS.2000. A transmission electron microscope study using vitrified ice sections of predentin: structural changes in the dentin collagenous matrix prior to mineralization. J Struct Biol. 132(3):212–225.
3.
BitterKParisSPfuertnerCNeumannKKielbassaAM. 2009. Morphological and bond strength evaluation of different resin cements to root dentin. Eur J Oral Sci. 117(3):326–333.
4.
BragaRRFronzaBM. 2020. The use of bioactive particles and biomimetic analogues for increasing the longevity of resin-dentin interfaces: a literature review. Dent Mater J. 39(1):62–68.
5.
BreschiLMaravicTCunhaSRCombaACadenaroMTjaderhaneLPashleyDHTayFRMazzoniA.2018. Dentin bonding systems: from dentin collagen structure to bond preservation and clinical applications. Dent Mater. 34(1):78–96.
6.
CadenaroMJosicUMaravicTMazzitelliCMarchesiGMancusoEBreschiLMazzoniA.2023. Progress in dental adhesive materials. J Dent Res. 102(3):254–262.
7.
CarrilhoMRTayFRDonnellyAMAgeeKATjaderhaneLMazzoniABreschiLFoulgerSPashleyDH. 2009. Host-derived loss of dentin matrix stiffness associated with solubilization of collagen. J Biomed Mater Res B Appl Biomater. 90(1):373–380.
8.
ChenWJinHZhangHWuLChenGShaoHWangSHeXZhengSCaoCY, et al. 2021. Synergistic effects of graphene quantum dots and carbodiimide in promoting resin-dentin bond durability. Dent Mater. 37(10):1498–1510.
9.
ChungLDinakarpandianDYoshidaNLauer-FieldsJLFieldsGBVisseRNagaseH.2004. Collagenase unwinds triple-helical collagen prior to peptide bond hydrolysis. EMBO J. 23(15):3020–3030.
10.
de ParisMTPerdigaoJde PaulaECopplaFHassVSchefferRFReisALoguercioAD. 2020. Five-year clinical evaluation of a universal adhesive: a randomized double-blind trial. Dent Mater. 36(11):1474–1485.
11.
FawzyASNitisusantaLIIqbalKDaoodUBengLTNeoJ.2013. Chitosan/riboflavin-modified demineralized dentin as a potential substrate for bonding. J Mech Behav Biomed Mater. 17:278–289.
12.
GaleMSDarvellBW. 1999. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 27(2):89–99.
13.
GuLMazzoniAGouYPucciCBreschiLPashleyDHNiuLTayFR. 2018. Zymography of hybrid layers created using extrafibrillar demineralization. J Dent Res. 97(4):409–415.
14.
HuZWuWYuMWangZYangZXingXChenXNiuLYuFXiaoY, et al. 2023. Mussel-inspired polymer with catechol and cationic Lys functionalities for dentin wet bonding. Mater Today Bio. 18:100506. doi:10.1016/j.mtbio.2022.100506
15.
JastrzebskaMZalewska-RejdakJWrzalikRKocotABarwińskiBMrózICwalinaB.2005. Dimethyl suberimidate cross-linked pericardium tissue: Raman spectroscopic and atomic force microscopy investigations. J Mol Struct. 744-747:789–795.
LangerAIlieN.2013. Dentin infiltration ability of different classes of adhesive systems. Clin Oral Investig. 17(1):205–216.
18.
LeiYXuJPanMChenYLiXZhuWShuCFangTLiaoHLuoQ, et al. 2023. Construction of an antibacterial low-defect hybrid layer by facile PEI electrostatic assembly promotes dentin bonding. J Mater Chem B. 11(2):335–344.
19.
MaierGPRappMVWaiteJHIsraelachviliJNButlerA.2015. Biological adhesives. Adaptive synergy between catechol and lysine promotes wet adhesion by surface salt displacement. Science. 349(6248):628–632.
20.
MartinezRNDasSKaufmanYWeiWIsraelachviliJNWaiteJH. 2015. Mussel adhesive protein provides cohesive matrix for collagen type-1alpha. Biomaterials. 51:51–57.
21.
Naupari-VillasanteRMatosTPde AlbuquerqueEGWarolFTardemCCalazansFSPoubelLAMatosTPde AlbuquerqueEGWarolF, et al. 2023. Five-year clinical evaluation of universal adhesive applied following different bonding techniques: a randomized multicenter clinical trial. Dent Mater. 39(6):586–594.
22.
NisarSHassVWangY.2025. Effects of crosslinker-modified etchants on durability of resin-dentin bonds in sound and caries-affected dentin. Dent Mater. 41(5):575–583.
23.
NisarSLiuHHassVWangY.2023. Dual-functional etchants that simultaneously demineralize and stabilize dentin render collagen resistant to degradation for resin bonding. Dent Mater. 39(11):1004–1012.
24.
PanMLiZXuJLeiYShuCLaoWChenYLiXLiaoHLuoQ, et al. 2023. Release of interface confined water significantly improves dentin bonding. J Dent Res. 102(7):734–742.
25.
PashleyDHTayFRYiuCHashimotoMBreschiLCarvalhoRMItoS.2004. Collagen degradation by host-derived enzymes during aging. J Dent Res. 83(3):216–221.
26.
Podporska-CarrollJIpJWGogolewskiS.2014. Biodegradable poly (ester urethane) urea scaffolds for tissue engineering: interaction with osteoblast-like MG-63 cells. Acta Biomater. 10(6):2781–2791.
27.
PucciCRGuLSZengCGouYPTayFRNiuLN. 2017. Susceptibility of contemporary single-bottle self-etch dentine adhesives to intrinsic water permeation. J Dent. 66:52–61.
28.
RappMVMaierGPDobbsHAHigdonNJWaiteJHButlerAIsraelachviliJN. 2016. Defining the catechol-cation synergy for enhanced wet adhesion to mineral surfaces. J Am Chem Soc. 138(29):9013–9016.
29.
Revilla-LeonMMorilloJAAttWOzcanM.2021. Chemical composition, Knoop hardness, surface roughness, and adhesion aspects of additively manufactured dental interim materials. J Prosthodont. 30(8):698–705.
30.
ShuCZhangZLiXXuJPanMChenYLeiYLiZLuoQLiX.2022. Refactoring phosphorylated hydrogel-like interface of demineralized dentin matrix via actively induced formation of nano-ACPs forms a defect-low hybrid layer promoting adhesive dentistry. Chem Eng J. 450(pt 1):137945. doi:10.1016/j.cej.2022.137945
31.
TayFRPashleyDHKapurRRCarrilhoMRHurYBGarrettLVTayKC. 2007. Bonding BisGMA to dentin—a proof of concept for hydrophobic dentin bonding. J Dent Res. 86(11):1034–1039.
32.
TayFRPashleyDHSuhBIHiraishiNYiuCK. 2005. Water treeing in simplified dentin adhesives—déjà vu?Oper Dent. 30(5):561–579.
33.
Tezvergil-MutluayAAgeeKAHoshikaTTayFRPashleyDH. 2010. The inhibitory effect of polyvinylphosphonic acid on functional matrix metalloproteinase activities in human demineralized dentin. Acta Biomater. 6(10):4136–4142.
34.
Tezvergil-MutluayAMutluayMMGuLSZhangKAgeeKACarvalhoRMMansoACarrilhoMTayFRBreschiL, et al. 2011. The anti-MMP activity of benzalkonium chloride. J Dent. 39(1):57–64.
35.
TjaderhaneL.2015. Dentin bonding: can we make it last?Oper Dent. 40(1):4–18.
36.
TjaderhaneLNascimentoFDBreschiLMazzoniATersariolILGeraldeliSTezvergil-MutluayACarrilhoMCarvalhoRMTayFR, et al. 2013. Strategies to prevent hydrolytic degradation of the hybrid layer-a review. Dent Mater. 29(10):999–1011.
37.
Van MeerbeekBYoshiharaKVan LanduytKYoshidaYPeumansM. 2020. From Buonocore’s pioneering acid-etch technique to self-adhering restoratives. A status perspective of rapidly advancing dental adhesive technology. J Adhes Dent. 22(1):7–34.
38.
WuLShaoHFangZZhaoYCaoCYLiQ.2019. Mechanism and effects of polyphenol derivatives for modifying collagen. ACS Biomater Sci Eng. 5(9):4272–4284.
39.
XuCWangY.2012. Collagen cross linking increases its biodegradation resistance in wet dentin bonding. J Adhes Dent. 14(1):11–18.
40.
XuRCYuFXiangGLWangXYHuZHHuangLLiuLDuanLYLiuQNiuLN, et al. 2022. A mussel glue-inspired monomer-etchant cocktail for improving dentine bonding. J Dent. 116:103888. doi:10.1016/j.jdent.2021.103888
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
