Abstract
Transverse microradiography (TMR) is considered as the gold standard technique for the evaluation of enamel lesions. Micro-computed tomography (µCT) has the advantage of non-destructive measurements, but the beam-hardening effect with polychromatic x-rays is a major drawback. To date, no study has validated µCT against TMR. The objective of this study was to validate µCT measurements of enamel lesions under various x-ray conditions and software beam-hardening correction (BHC) against TMR. Human molars with natural white-spot lesions were scanned for 5 min by µCT at 100 kV in different conditions: 50 µA (0.5-mm Al filter), 165 µA (0.5-mm Al/0.3-mm Cu), and 200 µA (0.5-mm Al/0.4-mm Cu), with or without BHC. Grayscale values were converted into mineral density values using phantoms. Thin sections at the same positions were then prepared for TMR. Lesion depth (LD; µm) and mineral loss (ΔZ; vol%µm) were compared between µCT and TMR by Pearson’s correlations. µCT measurements correlated well with TMR under all conditions (p < 0.001, r > 0.86 for LD and ΔZ), except for 0.5-mm Al without BHC (p > 0.05). Even without BHC, combined Al/Cu filters successfully reduced the beam-hardening effect. µCT can be used as a non-destructive alternative to TMR with comparable parameters for the study of enamel lesions.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
