A covalently bonded 3-aminopropyltriethoxysilane (APS)-TiO2 nanorods-woven carbon fiber (WCF) was designed though the in-situ hydrothermal growth followed by the chemical grafting. The silanization for TiO2 nanorods-WCF improved both the mechanical interlocking and chemical interaction among TiO2 nanorods, carbon fiber and phenolic, as well as the interfacial bonding between TiO2 nanorod and carbon fiber, thus formed an effective transition interface. The designed WCF offered a 157.1% increase of tensile strength compared to the desized-WCF. Moreover, the optimized interfacial binding and Si-based transfer film on worn surface leaded to the increased frictional coefficient and a 63.0% decrease of wear rate for composite under sliding frication. The APS-TiO2 nanorods-woven carbon fiber was proven to be an advanced reinforcement for wear-resistance phenolic composite.
LuoWLiuQLiY, et al.
Enhanced mechanical and tribological properties in polyphenylene sulfide/polytetrafluoroethylene composites reinforced by short carbon fiber. Compos Part B Eng2016;
91: 579–588.
2.
DhiebHBuijnstersJGElleuchK, et al.
Effect of relative humidity and full immersion in water on friction, wear and debonding of unidirectional carbon fiber reinforced epoxy under reciprocating sliding. Compos Part B Eng2016;
88: 240–252.
3.
GaoBZhangRHeM, et al.
Interfacial microstructure and mechanical properties of carbon fiber composites by fiber surface modification with poly(amidoamine)/polyhedral oligomeric silsesquioxane. Compos Part A Appl Sci Manuf2016;
90: 653–661.
4.
WuGMaLWangY, et al.
Interfacial properties and impact toughness of methylphenylsilicone resin composites by chemically grafting POSS and tetraethylenepentamine onto carbon fibers. Compos Part A Appl Sci Manuf2016;
84: 1–8.
5.
WangCChenLLiJ, et al.
Enhancing the interfacial strength of carbon fiber reinforced epoxy composites by green grafting of poly(oxypropylene) diamines. Compos Part A Appl Sci Manuf2017;
99: 58–64.
6.
JiangBZhangTZhaoL, et al.
Interfacially reinforced carbon fiber composites by grafting modified methylsilicone resin. Compos Sci Technol2017;
140: 39–45.
7.
SharmaSPLakkadSC.Impact behavior and fractographic study of carbon nanotubes grafted carbon fiber-reinforced epoxy matrix multi-scale hybrid composites. Compos Part A Appl Sci Manuf2015;
69: 124–131.
8.
WangYPillaiSKRCheJ, et al.
High interlaminar shear strength enhancement of carbon fiber/epoxy composite through fiber- and matrix-anchored carbon nanotube networks. ACS Appl Mater Interf2017;
9: 8960–8966.
9.
FengLLiKXueB, et al.
Optimizing matrix and fiber/matrix interface to achieve combination of strength, ductility and toughness in carbon nanotube-reinforced carbon/carbon composites. Mater Des2017;
113: 9–16.
10.
ZhaoZTengKLiN, et al.
Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface. Compos Struct2017;
159: 761–772.
11.
YaoXGaoXJiangJ, et al.
Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites. Compos Part B Eng2018;
132: 170–177.
12.
HungP-yLauK-tFoxB, et al.
Surface modification of carbon fibre using graphene-related materials for multifunctional composites. Compos Part B Eng2018;
133: 240–257.
13.
IslamMSDengYTongL, et al.
Grafting carbon nanotubes directly onto carbon fibers for superior mechanical stability: towards next generation aerospace composites and energy storage applications. Carbon2016;
96: 701–710.
14.
ZhangHLiAWangJ, et al.
Graphene integrating carbon fiber and hierarchical porous carbon formed robust flexible “carbon-concrete” supercapacitor film. Carbon2018;
126: 500–506.
15.
ZabihiOAhmadiMLiQ, et al.
Carbon fibre surface modification using functionalized nanoclay: a hierarchical interphase for fibre-reinforced polymer composites. Compos Sci Technol2017;
148: 49–58.
16.
WuGChenLLiuL.Effects of silanization and silica enrichment of carbon fibers on interfacial properties of methylphenylsilicone resin composites. Compos Part A Appl Sci Manuf2017;
98: 159–165.
17.
DekaBKKongKSeoJ, et al.
Controlled growth of CuO nanowires on woven carbon fibers and effects on the mechanical properties of woven carbon fiber/polyester composites. Compos Part A Appl Sci Manuf2015;
69: 56–63.
18.
EhlertGJGalanUSodanoHA.Role of surface chemistry in adhesion between ZnO nanowires and carbon fibers in hybrid composites. ACS Appl Mater Interf2013;
5: 635–645.
19.
KongKDekaBKKwakSK, et al.
Processing and mechanical characterization of ZnO/polyester woven carbon–fiber composites with different ZnO concentrations. Compos Part A Appl Sci Manuf2013;
55: 152–160.
20.
SongSALeeCKBangYH, et al.
Novel coating method using zinc oxide nanorods to improve the interfacial shear strength between carbon fiber and a thermoplastic matrix. Compos Sci Technol2016;
134: 106–114.
21.
WangBDuanYZhangJ.A controllable interface performance through varying ZnO nanowires dimensions on the carbon fibers. Appl Surf Sci2016;
389: 96–102.
22.
YangXJiangXHuangY, et al.
Building nanoporous metal-organic frameworks “armor” on fibers for high-performance composite materials. ACS Appl Mater Interf2017;
9: 5590–5599.
23.
WangHXianGLiH.Grafting of nano-TiO2 onto flax fibers and the enhancement of the mechanical properties of the flax fiber and flax fiber/epoxy composite. Compos Part A: Appl Sci Manuf2015;
76: 172–180.
24.
CanoLPolletEAvérousL, et al.
Effect of TiO2 nanoparticles on the properties of thermoplastic chitosan-based nano-biocomposites obtained by mechanical kneading. Compos Part A Appl Sci Manuf2017;
93: 33–40.
25.
MesbahiAHSemnaniDKhorasaniSN.Performance prediction of a specific wear rate in epoxy nanocomposites with various composition content of polytetrafluoroethylen (PTFE), graphite, short carbon fibers (CF) and nano-TiO2 using adaptive neuro-fuzzy inference system (ANFIS). Compos Part B Eng2012;
43: 549–558.
26.
JiangZGyurovaLASchlarbAK, et al.
Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles. Compos Sci Technol2008;
68: 734–742.
27.
WuGMaLLiuL, et al.
Interface enhancement of carbon fiber reinforced methylphenylsilicone resin composites modified with silanized carbon nanotubes. Mater Des2016;
89: 1343–1349.
28.
WangW-SWangD-HQuW-G, et al.
Large ultrathin anatase TiO2 nanosheets with exposed {001} facets on graphene for enhanced visible light photocatalytic activity. J Phys Chem C2012;
116: 19893–19901.
29.
MaLMengLWuG, et al.
Improving the interfacial properties of carbon fiber-reinforced epoxy composites by grafting of branched polyethyleneimine on carbon fiber surface in supercritical methanol. Compos Sci Technol2015;
114: 64–71.
30.
WuSYiMGeY, et al.
Effect of carbon fiber reinforcement on the tribological performance and behavior of aircraft carbon brake discs. Carbon2017;
117: 279–292.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
