Effects of aramid fibers and colloidal particle fillers in composite ethylene propylene diene monomer rubber thermal insulators for rocket motor insulation

Abstract

In this study, we develop and characterize an asbestos-free rubber composite for potential use as a rocket motor insulator. The insulator is based on ethylene propylene diene monomer blended with aramid fiber (Kevlar) in the pulp form (KP), together with alumina and/or silica as reinforcement. Different formulations based on these fillers were prepared. The fillers were dispersed in the ethylene propylene diene monomer polymeric matrix to obtain a homogenous master batch for curing. We analyzed and compared physical, mechanical and thermal properties of different compositions (density, hardness, tensile strength, elongation, ablation resistance and mass loss on heating). Reinforcement of ethylene propylene diene monomer with Kevlar improves the performance of the material with respect to mechanical and thermal properties, while not improving well the performance with respect to ablation resistance. Using hybrid reinforcement (KP + alumina + silica) within ethylene propylene diene monomer improves the performance of ethylene propylene diene monomer with respect to mechanical properties, thermal properties, ablation resistance and thermal decomposition resistance. The optimum performance of the insulation material was achieved when the formulation consisted of 10 part per hundred ratio KP with even amounts of alumina and silica. A novel composite engineered for improved insulation of solid rocket motors using the hybrid reinforcements was developed for the first time, which can be applied in future space missions.

Keywords

Thermal insulator fillers solid rocket motor ethylene propylene diene monomer Kevlar polymers

Get full access to this article

View all access options for this article.

References

Renganathan

Nageswara Rao

Jana

. Failure pressure estimations on solid propellant rocket motor with a circular perforated grain. Int J Pres Ves Pip 1999; 76: 955–963.

Guillot DG. Method of insulating a case of a solid propellant rocket motor. Patent no7410607B2, USA, 2008.

Ahmed

Hoa

. Thermal insulation by heat resistant polymers for solid rocket motor insulation. J Compos Mater 2011; 13: 1549–1559.

Sutton

. Rocket propulsion elements, 7th ed. New York: John Wiley, 2001.

Davenas

. Solid rocket propulsion technology, Oxford: Pergamon Press, 1993.

Bhuvaneswari

Sureshkumer

Kakade

et al.

Ethylene – propylene rubber as a futuristic elastomer for insulation of solid rocket motor. Defence Sci J 2006; 56: 309–320.

Natali

Rallini

Puglia

et al.

Ablative properties of carbon black and mwnt/phenolic composites: a comparative study. Composites Part A 2012; 43: 174–182.

Guillot DG. Low density thermoplastic elastomeric insulation for rocket motors. Patent 5498649, USA, 1996.

Guillot DG. Method of insulating a case of a solid propellant rocket motor. Patent 7410607B2, USA, 2008.

10.

Hutchens DE and Cohen N. Low smoke rocket motor liner compositions. Patent 6051087, USA, 2000.

11.

Pennington LW, Skolnik GE and Davidson FT. Non-asbestos insulation for rocket motor casing. Patent 6265330, USA, 2001.

12.

Herring GL. Elastomeric insulating materials for rocket motors. Patent 4,501,841, USA, 1985.

13.

Hoet

PHM

Brüske-Hohlfeld

Salata

. Nanoparticles - known and unknown health risks. J Nanobiotechnol 2004; 2: 12–12.

14.

Mathew Bell S and William FS. ASRM case insulation design and development. Composite structure laboratory. NASA –CR-191947, Aerojet general corporation 1992.

15.

Fan JL. Elastomeric insulating composition for a solid propellant rocket motor. Patent 6953823, USA, 2005.

16.

Guillot DG and Harvey RA. EPDM rocket motor insulation. Patent 7371784, USA, 2008.

17.

Natali M, Rallini M, Puglia D, et al. EPDM based heat shielding materials for solid rocket motors: a comparative study of different fibrous reinforcements. Terni, Italy: University of Perugia, INSTM, Perugia Research Unit, 2013.

18.

Larry DA, Norman FE and McCool AA. Asbestos free insulation development for the space shuttle solid propellant rocket motor. NASA Technical Reports Server, 2000.

19.

Fan JL, Hau S, Hua TF, et al. Low density rocket motor insulation. Patent 20070112091, USA, 2007.

20.

Harvey RA and Ellertson WJ. Fiber-reinforced rocket motor insulation. Patent 6691505, USA, 2004.

21.

Gajiwala MH. Low-cost, low-density, ablative rubber insulation for rocket motors. Patent 7461503, USA, 2008.

22.

Farajpour T, Bayat Y, Abdollahi M, et al. Effect of borax on the thermal and mechanical properties of ethylene-propylene-diene terpolymer rubber-based heat insulator. Tehran, IR Iran: University of Technology, 2015.