Smoothed particle hydrodynamics simulation for injection molding flow of short fiber-reinforced polymer composites

Abstract

The injection molding process of short fiber-reinforced polymer composites was investigated using smoothed particle hydrodynamics method. The polymer melt was modeled as a power law fluid, and the fibers were considered as rigid bodies. The flow behavior of short fiber-reinforced polymer composite melt and the motion and orientation of fibers were studied. The results showed that U-shaped fountain flow was generated at the flow front, and the center of the flow front gradually sank during the injection molding process; fibers were aligned to the flow direction in the cavity and near the wall in the sprue, and fibers accumulated at some points in the cavity. Additionally, the initial fiber configuration in the model influenced the final fiber orientation slightly. It was also found that the fiber orientation factor increased with the increase of fiber aspect ratio, and decreased with the increase of fiber content.

Keywords

Fiber-reinforced polymer composites smoothed particle hydrodynamics injection molding fiber orientation simulation

Get full access to this article

View all access options for this article.

References

Wang

Pattarachaiyakoop

et al.

A review on the tensile properties of natural fiber reinforced polymer composites. Compos Part B 2011; 42: 856–873.

Chen

et al.

Effects of amino silicone oil modification on properties of ramie fiber and ramie fiber/polypropylene composites. Mater Des 2015; 77: 142–148.

Zhang

Smith

. Dynamic simulation of discrete fiber motion in fiber-reinforced composite materials processing. J Compos Mater 2016; 50: 1301–1319.

Ren

. Preparation and properties of short natural fiber reinforced poly (lactic acid) composites. T Nonferr Metal Soc 2009; 19: s651–s655.

Chen

et al.

Warpage of injection-molded automotive B pillar trim fabricated with ramie fiber-reinforced polypropylene composites. J Reinf Plast Compos 2015; 34: 1144–1152.

Mishnaevsky

Dai

. Hybrid carbon/glass fiber composites: micromechanical analysis of structure–damage resistance relationships. Comp Mater Sci 2014; 81: 630–640.

Yan

Kortschot

. A simplified fabrication process for biofiber-reinforced polymer composites for automotive interior trim applications. J Mater Sci 2014; 49: 2630–2639.

Shokri

Bhatnagar

. Effect of packing pressure on fiber orientation in injection molding of fiber-reinforced thermoplastics. Polym Compos 2007; 28: 214–223.

Foss

Tseng

Snawerdt

et al.

Prediction of fiber orientation distribution in injection molded parts using Moldex3D simulation. Polym Compos 2014; 35: 671–680.

10.

Peng

Qin

Jiang

. An approach for predicting fiber orientation distribution in plastic injection molding of composites. Br J Appl Sci Technol 2015; 7: 186–194.

11.

Meyer

Hofmann

Baird

. Prediction of short glass fiber orientation in the filling of an end-gated plaque. Compos Part A 2014; 62: 77–86.

12.

Meyer

Hofmann

Baird

. Initial conditions for simulating glass fiber orientation in the filling of center-gated disks. Compos Part A 2013; 49: 192–202.

13.

Gupta

Wang

. Fiber orientation and mechanical properties of short-fiber-reinforced injection-molded composites: simulated and experimental results. Polym Compos 1993; 14: 367–382.

14.

Lin

Jin

Zheng

et al.

3D fiber orientation simulation for plastic injection molding. AIP Conf Proc 2004; 712: 282–287.

15.

Phelps

Tucker

. An anisotropic rotary diffusion model for fiber orientation in short- and long-fiber thermoplastics. J Nonnewton Fluid Mech 2009; 156: 165–176.

16.

VerWeyst

Tucker

III Foss

et al.

Fiber orientation in 3-D injection molded features: prediction and experiment. Int Polym Proc 1999; 14: 409–420.

17.

Advani

Tucker

III . The use of tensors to describe and predict fiber orientation in short fiber composites. J Rheol 1987; 31: 751–784.

18.

Bay

Tucker

. Fiber orientation in simple injection moldings. Part I: theory and numerical methods. Polym Compos 1992; 13: 317–331.

19.

Yashiro

Okabe

Matsushima

. A numerical approach for injection molding of short-fiber-reinforced plastics using a particle method. Adv Compos Mater 2011; 20: 503–517.

20.

Yashiro

Sasaki

Sakaida

. Particle simulation for predicting fiber motion in injection molding of short-fiber-reinforced composites. Compos Part A 2012; 43: 1754–1764.

21.

Gingold

Monaghan

. Smoothed particle hydrodynamics: theory and application to non-spherical stars. Mon Not R Astron Soc 1977; 181: 375–389.

22.

Lucy

. A numerical approach to the testing of the fission hypothesis. Astron J 1977; 82: 1013–1024.

23.

Cleary

Alguine

et al.

Flow modelling in casting processes. Appl Math Model 2002; 26: 171–190.

24.

Cleary

. Three-dimensional smoothed particle hydrodynamics simulation of high pressure die casting of light metal components. J Light Met 2002; 2: 169–183.

25.

Cleary

Prakash

et al.

3D SPH flow predictions and validation for high pressure die casting of automotive components. Appl Math Model 2006; 30: 1406–1427.

26.

Cleary

Prakash

et al.

Short shots and industrial case studies: understanding fluid flow and solidification in high pressure die casting. Appl Math Model 2010; 34: 2018–2033.

27.

Cleary

Savage

et al.

Flow analysis and validation of numerical modelling for a thin walled high pressure die casting using SPH. Comput Part Mech 2014; 1: 229–243.

28.

Deeb

Kulasegaram

Karihaloo

. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part I: slump flow test. Comput Part Mech 2014; 1: 373–389.

29.

Deeb

Kulasegaram

Karihaloo

. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part II: L-box test and the assessment of fibre reorientation during the flow. Comput Part Mech 2014; 1: 391–408.

30.

Fan

Tanner

Zheng

. Smoothed particle hydrodynamics simulation of non-Newtonian moulding flow. J Nonnewton Fluid Mech 2010; 165: 219–226.

31.

Monaghan

. Smoothed particle hydrodynamics. Rep Prog Phys 2005; 68: 1703–1759.

32.

Liu

. Smoothed particle hydrodynamics (SPH): an overview and recent developments. Arch Comput Method E 2010; 17: 25–76.

33.

Shao

. Simulation of near-shore solitary wave mechanics by an incompressible SPH method. Appl Ocean Res 2002; 24: 275–286.

34.

Zhen

Handler

Zhang

et al.

Evolution of a hairpin vortex in a shear-thinning fluid governed by a power-law model. Phys Fluids 2013; 25: 101703–101703.

35.

Monaghan

. Simulating free surface flows with SPH. J Comput Phys 1994; 110: 399–406.

36.

Crespo

AJC

Domínguez

Rogers

et al.

DualSPHysics: open-source parallel CFD solver based on smoothed particle hydrodynamics (SPH). Comput Phys Commun 2015; 187: 204–216.

37.

Crespo

AJC

Gómez Gesteira

Dalrymple

. Boundary conditions generated by dynamic particles in SPH methods. Comput Mater Con 2007; 5: 173–184.

38.

Takamiya

Okada

Sakai

et al.

Smoothed particle hydrodynamics analysis on semi-solid metal forming process. Jpn J Ind Appl Math 2011; 28: 183–203.

39.

Monaghan

Kos

Issa

. Fluid motion generated by impact. J Waterw Port C 2003; 129: 250–259.

40.

Liu

. Smoothed particle hydrodynamics: a meshfree particle method, Singapore: World Scientific, 2003, pp. 149–153.

41.

Morris

Fox

Zhu

. Modeling low Reynolds number incompressible flows using SPH. J Comput Phys 1997; 136: 214–226.

42.

Moses

Advani

Reinhardt

. Investigation of fiber motion near solid boundaries in simple shear flow. Rheol Acta 2001; 40: 296–306.

43.

Yokoi

Kanetoh

. Visualization analysis of asymmetric fountain flow phenomenon in injection molding of filler-reinforced resins by rotary runner exchange system. Int Polym Proc 2005; 20: 157–161.

44.

Kim

Park

. A study on fiber orientation during the injection molding of fiber-reinforced polymeric composites:(Comparison between image processing results and numerical simulation). J Mater Process Technol 2001; 111: 225–232.