Abstract
The characterization of ceramic/polymer composites was performed on zinc oxide/poly(vinylidene fluoride) – ZnO/PVDF and barium titanate/poly(vinylidene fluoride) composites with varying filler concentration in order to evaluate the main interactions responsible for the composite dielectric behavior. The materials, poly(vinylidene fluoride) and its composites, were melt-blended using a two-roller mixer and then hot-pressed. The permittivity of composites was enhanced compared with that of the pure poly(vinylidene fluoride) with the addition of 20 w/w% of ZnO particles. However, samples with 40 or 60 w/w% of ZnO registered a diminution in the real permittivity values which was connected to particle-matrix adhesion problems. On the other hand, barium titanate composites presented a more homogeneous morphology with less presence of voids and a better adhesion between the filler and the polymer, where real permittivity increased with the addition of barium titanate particles.
Get full access to this article
View all access options for this article.
