Numerical simulating the flexural properties of 3D weft-knitted spacer fabric reinforced composites

Abstract

Three-dimensional spacer fabrics due to their specific structural features have achieved significant importance to be used as highly effective technical textiles especially in composite manufacturing. Increasing applications of three-dimensional fabrics in technical fields as well as the high ability of knitting process in production of highly structured-knitted preforms made the researchers to be focused on finding novel structures with high potential application as the composite reinforcements in order to achieve some desired properties. Along with others researches, in this paper an especially structured three-dimensional spacer weft-knitted fabrics was produced on an electronic flat knitting machine, using 1680 denier high-tenacity polyester yarn. The fabrics samples were employed in thermoset composite manufacturing process using the epoxy resin. In order to investigate the mechanical behavior of the composite samples in term of their flexural performance, a three-point bending test was performed. For precise investigation, numerical simulation based on finite element method was also applied. Good correlation between the experimental and theoretical results showed such reasonable validity of the proposed model for simulating the mechanical behavior of the spacer-knitted reinforced composite under external bending loads.

Keywords

Three-dimensional spacer-knitted fabric flexural properties fabric reinforced composite finite element method numerical simulation

Get full access to this article

View all access options for this article.

References

. A study on composite honeycomb sandwich panel structure. Mater Des 2008; 29: 709–713.

Kee Paik

Thayamballi

Sung Kim

. The strength characteristics of aluminum honeycomb sandwich panels. Thin-Walled Struct 1999; 35: 205–231.

Dharmasena

Wadley

HNG

Xue

. Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading. Int J Impact Eng 2008; 35: 1063–1074.

Ning

Janowski

Vaidya

. Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle. Compos Struct 2007; 80: 82–91.

Mohan

Yip

Sridhar

. Design of hybrid sandwich panel with aluminum foam core and carbon fiber reinforced plastic face sheets under three-point bending. Solid State Phenom 2006; 111: 63–66.

Kitazono

Kamimura

Sato

. Superplastic forming and foaming process for porous aluminum plates. Mater Sci Forum 2007; 551–552: 23–30.

Leong

Ramakrishna

Huang

. The potential of knitting for engineering composites – a review. Compos Part A Appl Sci Manuf 2000; 31: 197–220.

Abounaim M, Hoffmann G, Diestel O, et al. Development of flat knitted spacer fabrics for composites using hybrid yarns and investigation of 2D mechanical properties. Text Res J 2009; 79: 596–610.

Abounaim Md, Hoffmann G, Diestel O, et al. 3D spacer fabric as sandwich structure by at knitting for composites using hybrid yarn. In: Proceeding of 9th world Textile Conference, University of Twente, 26–28 May 2009, pp. 675–681.

10.

Sheikhzadeh

Ghane

Eslamian

. Modeling study on the lateral compression behaviors of spacer fabrics. J Text Inst 2010; 101: 795–800.

11.

Chen

Long

Liu

. Mechanical properties of 3D-structure composite based on warp-knitted spacer fabrics. AUTEX Res J 2015; 15: 127–137.

12.

Mokhrati

Mirzadeh-Vaghefi

Shamshirsaz

. Analysis of compressibility behavior in warp knitted spacer fabrics: experiments and Wan Wyk theory. J Eng Fibers Fabrics 2013; 8: 125–130.

13.

Ciobanu L. SANDTEX – developments on knitted sandwich fabrics with complex shape. In: First Autex conference. TECHNITEX, Portugal, 26–29 June 2001, pp.490–496. Povoa de Varzim.

14.

Ciobanu L. Development of 3D knitted fabrics for advanced composite materials. PhD Eng. Gheorghe Asachi, Technical University of Iasi, Romania, 2011.

15.

Araujo M, Hong H, Fangueiro R, et al. Developments in weft-knitting technical textiles. In: First Autex Conference: TECHNITEX, Portugal, 2001, 253–262.

16.

Ionesi

Dumitras

Ciobanu

. Analysis of low velocity impact behavior of aramid-linen fibre reinforced composites using Taguchi method. J Optoelectron Adv Mater 2012; 14: 544–550.

17.

Hassanzadeh S, Hasani H and Zarrebini M. Utilization of the composite panels reinforced with 3D Spacer weft-knitted fabrics in lightweight building constructions. In: Proceeding of The Annual International Civil, Architecture and Urbanism Conference (ICAUC 2015), Shiraz, Iran, 22 September 2015, pp. 1–5. Kharazmi Higher Institute of Science and Technology.

18.

Abounaim

Hoffmann

Diestel

. Thermoplastic composite from innovative at knitted 3D multi-layer spacer fabric using hybrid yarn and the study of 2D mechanical properties. Compos Sci Technol 2010; 70: 363–370.

19.

Hassanzadeh S, Hasani H and Zarrebini M. Effects of cross-sectional shape on mechanical performances of new-designed FRP sandwich structures reinforced with 3D weft-knitted spacer fabrics. In: Second international conference on research in science and technology, Istanbul, Turkey, 14 March 2016.

20.

Kouznetsooua VG. Computational homogenization for the multi scale analysis of multi-phase material. PhD Thesis, Technical University Eindhoven, The Netherlands, 2002.

21.

Vassiliadis

Provatidis

Kallivretaki

. Geometrical modeling of plain weft knitted fabrics. Indian J Fibre Text Res 2007; 32: 62–71.

22.

Ramakrishna

. Characterization and modelling of the textile properties of plain weft-knitted fabrics reinforced composites. Compos Sci Technol 1997; 57: 1–22.

23.

Hill

. On macroscopic effects of heterogeneity in elastoplastic media at finite strain. Math Proc Camb Phil Soc 1984; 95: 481–494.

24.

Mahendran M, Pant S, Straznicky PV, et al. Feasibility study of closed cavity bag moulding (CCBM) for novel mouldless Manufacturing of Carbon-epoxy composites. 20th Aerospace Structures and Materials Symposium. Carletone University, Canada, 2009.