Composites of rubberwood flour (RWF) and recycled polypropylene (rPP) were produced into panel samples by using a twin-screw extruder. The effects on creep behavior of mixture fractions of rPP, RWF, maleic anhydride-grafted polypropylene (MAPP), and ultraviolet (UV) stabilizer were studied in a D-optimal mixture design. Creep was significantly affected by the composition. Increasing the fraction of RWF decreased creep, while MAPP and UV stabilizer increased it. The models fitted were used to optimize a desirability score that balanced multiple creep characteristics. The model-based optimal formulation 50.5 wt% rPP, 44.9 wt% RWF, 3.5 wt% MAPP, 0.1 wt% UV stabilizer, and 1.0 wt% lubricant was experimentally validated to have low creep closely matching the model predictions.
RatanawilaiTLekanukitPUrapantamasS. Effect of rubberwood and palm oil content on the properties of wood-polyvinyl chloride composites. J Thermoplast Compos Mater2012. DOI: 10.1177/0892705712454863.
6.
PetchpradabPYoshidaTCharinpanitkulT. Hydrothermal pretreatment of rubber wood for the saccharification process. Ind Eng Chem Res2009; 48: 4587–4591.
7.
HomkhiewCRatanawilaiTThongruangW. Composites from recycled polypropylene and rubberwood flour: effects of composition on mechanical properties. J Thermoplast Compos Mater2013. DOI: 10.1177/0892705712475019.
8.
PengXFanMHartleyJ. Properties of natural fiber composites made by pultrusion process. J Compos Mater2011; 46: 237–246.
9.
FrancucciGRodrıguezESVazquezA. Experimental study of the compaction response of jute fabrics in liquid composite molding processes. J Compos Mater2011; 46: 155–167.
10.
CuiYLeeSNoruziaanB. Fabrication and interfacial modification of wood/recycled plastic composite materials. Compos A: Appl Sci Manuf2008; 39: 655–661.
11.
RatanawilaiTThanawattanasirikulNHomkhiewC. Mechanical and thermal properties of oil palm wood sawdust reinforced post-consumer polyethylene composites. ScienceAsia2012; 38: 289–294.
12.
Themelis NJ, Castaldi MJ, Bhatti J, et al. Energy and economic value of nonrecycled plastics (NRP) and municipal solid wastes (MSW) that are currently landfilled in the fifty States. EEC Study of non-recycled plastics, Earth Engineering Center, Columbia University, 2011, p.8.
13.
AdhikaryKBPangSStaigerMP. Dimensional stability and mechanical behaviour of wood-plastic composites based recycled and virgin high-density polyethylene (HDPE). Compos B: Eng2008; 39: 807–815.
LisperguerJBustosXSaraviaY. Thermal and mechanical properties of wood flour-polystyrene blends from postconsumer plastic waste. J Appl Polym Sci2011; 119: 443–451.
16.
AshoriA. Municipal solid waste as a source of lignocellulosic fiber and plastic for composite industries. Polym Plas Technol Eng2008; 47: 741–744.
17.
AshoriASheshmaniS. Hybrid composites made from recycled materials: moisture absorption and thickness swelling behavior. Biores Technol2010; 101: 4717–4720.
18.
MadhoushiMChavooshiAAshoriA. Properties of wood plastic composite panels made from waste sanding dusts and nanoclay. J Compos Mater2013; 48(14): 1661–1669.
19.
NourbakhshAAshoriA. Preparation and properties of wood plastic composites made of recycled high-density polyethylene. J Compos Mater2009; 43: 877–883.
20.
NajafiSKHamidiniaETajvidiM. Mechanical properties of composites from sawdust and recycled plastics. J Appl Polym Sci2006; 100: 3641–3645.
21.
NourbakhshAAshoriATabariHZ. Mechanical and thermo-chemical properties of wood-flour/polypropylene blends. Polym Bull2010; 65: 691–700.
22.
MontgomeryDC. Design and analysis of experiments, 7th ed. New York, NY: John Wiley & Sons, Inc, 2009.
23.
KhosrowshahiYBSalemA. Influence of polyvinyl alcohol and carboxymethyl cellulose on the reliability of extruded ceramic body: application of mixture design method in fabricating reliable ceramic raschig rings. Inter J Appl Cera Technol2011; 8: 1334–1343.
24.
JohnRCS. Experiments with mixtures, ill-conditioning, and ridge regression. J Qual Technol1984; 16: 81–96.
25.
MatuanaLMMengelogluF. Manufacture of rigid PVC/wood-flour composite foams using moisture contained in wood as foaming agent. J Vinyl Addit Technol2002; 8: 264–270.
JunZXiang-mingWJian-minC. Optimization of processing variables in wood–rubber composite panel manufacturing technology. Biores Technol2008; 99: 2384–2391.
28.
AminiMYounesiHBahramifarN. Application of response surface methodology for optimization of lead biosorption in an aqueous solution by Aspergillus niger. J Hazard Mater2008; 154: 694–702.
29.
ErenIKaymak-ErtekinF. Optimization of osmotic dehydration of potato using response surface methodology. J Food Eng2007; 79: 344–352.
30.
MyersRHMontgomeryDCAnderson-CookCM. Response surface methodology: process and product optimization using designed experiments, 3rd ed. Hoboken, NJ: John Wiley & Sons, Inc, 2009.
31.
MarcovichNEVillarMA. Thermal and mechanical characterization of linear low-density polyethylene/wood flour composites. J Appl Polym Sci2003; 90: 2775–2784.
32.
RahmanMRHuqueMMIslamMN. Improvement of physico-mechanical properties of jute fiber reinforced polypropylene composites by post-treatment. Compos A: Appl Sci Manuf2008; 39: 1739–1747.
BengtssonMGatenholmPOksmanK. The effect of crosslinking on the properties of polyethylene/wood flour composites. Compos Sci Technol2005; 65: 1468–1479.
MohantySVermaSKNayakSK. Influence of fiber treatment on the performance of sisal–polypropylene composites. J Appl Polym Sci2004; 94: 1336–1345.
37.
HomkhiewCRatanawilaiTThongruangW. The optimal formulation of recycled polypropylene/rubberwood flour composites from experiments with mixture design. Compos B: Eng2014; 56: 350–357.
38.
WechslerAHizirogluS. Some of the properties of wood–plastic composites. Build Environ2007; 42: 2637–2644.
39.
GarciaMHidalgoJGarmendiaI. Wood–plastics composites with better fire retardancy and durability performance. Compos A: Appl Sci Manuf2009; 40: 1772–1776.
