Oleic acid-modified CuS nanoparticles were chemically synthesized. The tribological properties of surface modified and unmodified CuS nanoparticles as additives in the hybrid polytetrafluoroethylene (PTFE)/Kevlar fabric/phenolic composite were investigated in detail. The experimental results indicated that the incorporation of modified CuS nanoparticles improved the antiwear ability of the fabric/phenolic composite at varied loads and environmental temperatures. The reasons for the enhanced wear properties of the fabric/phenolic composite filled with surface-modified CuS nanoparticles were discussed based on the results of scanning electron microscopy and Fourier transform infrared spectroscopy.
Yue, C.Y. , Sui, G.X. and Looi, H.C. (2000). Effects of Heat Treatment on the Mechanical Properties of Kevlar-29 Fibre, Compos. Sci. Technol., 60: 421-427.
2.
Blanchet, T.A. and Kennedy, F.E. (1992). Sliding Wear Mechanism of Polytetrafluoroethylene (PTFE) and PTFE Composites, Wear , 153: 229-243.
Lancaster, J.K. and Bay, R.G. (1982). Selecting and Use of Wear Tests for Coatings, ASTM, STP, 769: 92-99.
5.
Qiao, H.B., Guo, Q., Tian, A.G., Pan, G.L. and Xu, L.B. ( 2007). A Study on Friction and Wear Characteristics of Nanometer Al2O3/PEEK Composites Under the Dry Sliding Condition, Tribol. Int, 40: 105-110.
6.
Sawyer, W.G., Freudenberg, K.D., Bhimaraj, P. and Schadler, L.S. ( 2003). A Study on the Friction and Wear Behavior of PTFE Filled with Alumina Nanoparticles, Wear, 254: 573-580.
7.
Chang, L., Zhang, Z., Zhang, H. and Friedrich, K. ( 2005). Effect of Nanoparticles on the Tribological Behaviour of Short Carbon Fibre Reinforced Poly(Etherimide) Composites, Tribol. Int., 38: 966-973.
8.
Wetzel, B., Haupert, F., Friedrich, K., Zhang, M.Q. and Rong, M.Z. ( 2002). Impact and Wear Resistance of Polymer Nanocomposites at Low Filler Content, Polym. Eng. Sci., 42: 1919-1927.
9.
Chang, L., Zhang, Z., Zhang, H. and Schlarb, A.K. ( 2006). On the Sliding Wear of Nanoparticle Filled Polyamide 66 Composites, Compos. Sci. Technol., 66: 3188-3198.
10.
Li, F., Hu, K., Li, J. and Zhao, B. ( 2002). The Friction and Wear Characteristics of Nanometer ZnO Filled Polytetrafluoroethylene, Wear, 249: 877-882.
11.
Friedrich, K. , Zhang, Z. and Schlarb, A.K. (2005). Effects of Various Fillers on the Sliding Wear of Polymer Composites, Compos. Sci. Technol., 65: 2329-2343.
12.
Schwartz, C.J. and Bahadur, S. (2000). Studies on the Tribological Behavior and Transfer Film-Counterface Bond Strength for Polyphenylene Sulfide Filled with Nanoscale Alumina Particles, Wear, 237: 261-273.
13.
Zhang, H.J. , Zhang, Z.Z., Guo, F. and Liu, W.M. (2009). Friction and Wear Behavior of the Hybrid PTFE/Cotton Fabric Composites Filled with TiO2 Nanoparticles and Modified TiO2 Nanoparticles, Polym. Eng. Sci., 49: 115-122.
14.
Bahadur, S. and Sunkara, C. (2005). Effect of Transfer Film Structure, Composition and Bonding on the Tribological Behavior of Polyphenylene Sulfide Filled with Nanoparticles of TiO2, ZnO, CuO and SiC, Wear, 258: 1411-1421.
15.
Shi, G. , Zhang, M.Q., Rong, M.Z., Wetzel, B. and Friedrich, K. (2003). Friction and Wear of Low Nanometer Si3N4 Filled Epoxy Composites, Wear, 254: 784-796.
16.
Wang, Q., Xue, Q., Liu, H., Shen, W. and Xu, J. ( 1996). The Effect of Particle Size of Nanometer ZrO2 on the Tribological Behaviour of PEEK, Wear, 198: 216-219.
17.
Jiang, Z., Gyurova, L.A., Schlarb, A.K., Friedrich, K. and Zhang, Z. ( 2008). Study on Friction and Wear Behavior of Polyphenylenesulfide Composites Reinforced by Short Carbon Fibers and Sub-micro TiO2 Particles, Compos. Sci. Technol., 68: 734-742.
